Question about Mazda Millenia

1 Answer

I need a diagram for a valve timing on a Mazda Millienia 2.5 L, so that I can time this engine. Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,917 Answers

Hi

In Mazda Millenia with a 2.5 liter engine the timing marks are hard to find. Above the crank sprocket, there is an upside down triangle cast into the block. Behind the crank sprocket, there is a flat disc that rotates with the sprocket. This disc has a notch in it that needs to be lined up with the upside down triangle. Looking at the front of the engine, the camshaft to your right has an arrow on the sprocket. Line this up with the very small tick cast into the block. This should line up the arrow at about a 10:00 o'clock position. On the camshaft located on your left, the original factory tick mark for timing can't be seen without a mirror when the engine is in the vehicle. So, as an afterthought, Mazda came up with another solution. There are two tick marks on the block at about the 12:00 o'clock postion. On the camshaft sprocket are two small drilled out holes that need to line up with these two tick marks. If you haven't already, the hydrolic tensioner needs to be removed, compressed, pinned, and reinstalled. Then remove the idler pulley just below the camshaft sprocket located to your right. Route the belt over the crankshaft, right side idler pulley, right side cam sprocket, tensioner idler, and then left side cam sprocket. While putting tension on the belt, reinstall the missing idler pulley. Then remove the pin from the tensioner releasing tension on the belt. Rotate the crankshaft twice and recheck the timing.

Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to time a 1988 Mistubishi mini truck.


[PDF]Mitsubishi Canter Truck Engine Diagram - SourceForge

inhub.sourceforge.net/alpha/.../mitsubishi-canter-truck-engine-diagram.p...
mitsubishi canter truck engine diagram mitsubishi canter 4d34 engine manual ...light on dash symbols 95 mitsubishi mini truck repair manual 1988 mitsubishi ...

Timing problem 22r 1987 ' IH8MUD Forum

forum.ih8mud.com > ... > 95-older Toyota Truck Tech
Mar 17, 2009 - I am having trouble timing my 22r, 1987 mini truck. ... adjusting the valves, at TDC, the dot on the timing chain cam gear is not quite all the way ...

Mitsubishi 2.6 liter engine - description and common repairs

www.allpar.com/fix/26.html
I had a 1988 2.6 liter Mitsubishi engine in my Mazda B2600 pickup truck, and ... and I would have been out the $99 for a new timing chain kit (which includes ...

Jan 08, 2016 | Mini Cars & Trucks

1 Answer

How to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve engine


Choose:

1994 Mazda MPV timing belt replacement, 6 cylinder DOHC ...

? 3:46
https://www.youtube.com/watch?v=sD2G-NzycvU
Aug 11, 2011 - Uploaded by rsarp
1994 Mazda MPV timing belt replacement, 6 cylinder DOHC 3.0... engine so the valves would not be bent ...

How to replace the timing belt on a 1994 mazda 929 3.0 ...

www.fixya.com/.../t25991928-replace_timing_belt_1994_mazda_929_3...
4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing belt, what ... 2004 6s, 3l. where is the canister purge valve solenoid located?

Where are the timing marks on a 1994 mazda 929 3.0l - Fixya

www.fixya.com/cars/t25991952-timing_marks_1994_mazda_929_3_0l
4 hours ago - where are the timing marks on a 1994 mazda 929 3.0l - Mazda Cars ...1994 Mazda E2000 Cam Timing Mark Positions to Replace Timing Belt ... on a 1994mazda v6 dohc 24 valve engine How to align the timing mark on the ...

Mazda Timing Belt Replacement



Dec 03, 2015 | Mazda Cars & Trucks

1 Answer

Why does my 95 mazda millienia take a long time to pick up speed?


tune up, check tire pressure,replace fuel filter and air filter. LOL that usually helps

Aug 19, 2014 | Cars & Trucks

2 Answers

Timing diagram for mazda323f 16v


Mazda 1.6L & 1.8L 16 valve DOHC

1_13_2012_6_38_57_pm.jpg

Jan 13, 2012 | Mazda Cars & Trucks

1 Answer

I have a 2002-2003 mazda drifter 2.5 tdi. I would like to see a scetch or diagram on the position of the crankpully, feul pump pully and the top pully(i think it has something to do with valves) when i...


1) You won't find a fuel pump pulley. They're electric.
2) The top pulley has nothing to do with valves.
3) You really should just be able to see the crank pulley.

When you get the front/timing cover off, you'll see a chain / belt attaching two sprockets. You should get a haynes guide for timing your car - if you're off one degree you could cause catastrophic engine failure. There are specific procedures and special tools to ensure that the timing is properly set. Invest in them!

May 09, 2011 | 2002 Mazda B-Series

1 Answer

Need diagram for timing belt for 1991 mazda


here you go buddy

http://forums.mazdaworld.org/index.php?showtopic=25269

http://www.2carpros.com/forum/1994-mazda-protege-replacing-a-blown-head-gasket-vt206242.html

http://www.2carpros.com/forum/2000-mazda-protege--my-timing-belt-broke-again,-oil-pressure-vt253721.html

http://www.blurtit.com/q298393.html

hope this helps.

thanks,

voodoo

Aug 09, 2009 | 1991 Mazda Protege

10 Answers

Need to know how to time my car


how do i get the timing back where it belongs on my 2006 chrysler 300 i messed with it before i realized it had marks

Jul 23, 2008 | 1995 Mazda 626

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...