Question about 1998 Ford Explorer

1 Answer

1996 chevy pickup ac not working right, builds up too much pressure (75 pounds) before you have time to put in 1 can of 134a gas. I have changed out every ac part that I could find on the truck and still no success! What else can I do? I'm desperate after 3 days of working on it!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

Change the orifice tube at the firewall, if you haven't done that already.

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of ac relay 1996 S10


My Chevy S10 AC clutch is not engaging... new compressor and dryer and hoses...new relay fuse in engine compartment...could putting more freon in help it engage?

Apr 09, 2012 | 1996 Chevrolet S-10 Pickup

1 Answer

1996 CHEVY K1500 PICKUP 5.7 LITER VORTEC GAS ENGINE STARTS AND IDLES FINE BUT WHEN YOU PUT IT IN GEAR AND STEP ON THE GAS IT WILL DIE IT WILL START BACK UP AGAIN RIGHT AWAY BUT AS SOON AS YOU GIVE IT...


the only way to tell for sure is to have the engine anylized with a real time scanner, it could be a sensor or actuator that is not throwing a code so a scan for codes will not help, if all seems to be od start looking for vacuum leaks, air bubbles in the fuel, fuel pressure constant, etc

Apr 19, 2011 | 1996 Chevrolet K1500

2 Answers

1996 chevy tahoe 5.7l vortec , fuel pressure is 50 psi and runs perfect but when you give it gas it bogs out and wont go


YOUR LUCKY IT RUNS AT ALL THAT IS LOW PRESURE LOOKS LIKE FULE PUMP TIME FULE PRESURE NEEDS TO CLOSER TO 60 LBS PLUS THATS WHY IT IS BOGGING OUT YOU CAN TRY CHANGING THE FUEL FILTER BUT IT LOOKS LIKE TIME FOR ANEW FULE PUMP HOW OLD IS THE PUMP AND WHAT IS THE MILAGE ON THE TAHOE 150K PLUS RIGHT OR MORE

Mar 03, 2011 | 1996 Chevrolet Tahoe

1 Answer

How do u troubleshoot a s-10 chevy pickup 1996 it


you will need a spark tester, noid light and a fuel pressure guage, first check spark, then fuel pressure and then injector pulse, you will find one of them missing

Nov 09, 2010 | 1996 Chevrolet S-10 Pickup

2 Answers

1996 chevy silverado half ton v6 pickup problems starting


SOUND LIKE FUEL FILTER STOPPED UP.WEAK FUEL PUMP.CHECK FUEL PRESSURE.IT SHOULD BE 60 TO 66 PSI.ALSO CHECK VACUUM LINE GOING TO FUEL PRESSURE REGULATOR.MAKE SURE ITS GETTING VACUUM.IF YOU GAS IN VACUUM LINE GOING TO FUEL PRESSURE REGULATOR.REGULATOR FAULTY.IF YOUR ENGINE IS 4.3 FUEL PRESSURE SUPPOSE TO BE EITHER 41 - 47 PSI AND 58 - 64 PSI

Apr 11, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

I have a 2000 buick regal,3.8 that will not


u can try replacing the relay. when u turn the key to the position right before starting position which is the position it would be in when u start a car and let off key because car started, well this is somting to try turn the key to position right before starting position have sombody listing down by fuel tank and see if tey can hear pump come on, try a couple of times to make sure they can hear, also the pump will only come on for about 2 seconds each time u put the key in that position, if u do hear the pump come on each time u do that that means pump is working if so u need to build up fuel pressure which could b anywhere from 20 to 60 pressure, to build up pressure u need to turn the key to same position turn key off turn key back to that position then off and do it like 50 times each time u do that the pump is on for only 2 seconds only building a half to one pound of pressure thats why u haft to turn key somany times to build it back up, if u try that and car keeps almost starting but doesent then u need to build up a little more pressure. NOTE make sure u have gas, also most electric fuel pumps will go out when turned on dry

Nov 27, 2009 | 2000 Buick Regal

1 Answer

I HAVE A 1996 CHEVY PICKUP WITH A 350 TBI IN IT. I REPLACED THE FUEL PUMP AND FUEL FILTER, COOLING SENSOR AND IDLE SENSOR. WHEN YOU START IT UP IT RUNS FINE AT AN IDLE, BUT WHEN GIVEN THE GAS IT CUTS IN...


put a pressure gauge on the fuel line first to see if fuel pressure is dropping ,When you changed the fuel pump did you renew the flexible coupling and were the clips done up tight ??

Jun 10, 2009 | 2001 Daewoo Lanos

1 Answer

1998 chevy s-10


sound like fuel pump you put gas in it it runs.its not pump gas to the fuel system.change fuel filter if it been a while.check fuel pressure.

Apr 12, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

1996 Chevy Pickup defroster


It sounds like you have a problem with mice building a nest! They love to make this place a home!
Frankster016

Sep 12, 2008 | 1996 Chevrolet K1500

Not finding what you are looking for?
1998 Ford Explorer Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...