Question about BMW 525

1 Answer

I need help replacing my temp thremosta. The cowling fan cover is in the way...The problem is the fan keeps spinning. I cant get the fan off.

Posted by on

  • jcram1972 Jul 16, 2010

    THANK YOU...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,917 Answers

Hi

Please check the bellow links to have an in-depth knowledge to your query…

http://www.pelicanparts.com/bmw/techarticles/E36-thermostat/E36-thermostat.htm

http://www.ehow.com/how_4531713_replace-bmw-thermostat.html

Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

Posted on Jul 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Everytime i start my sled i cant get the temp or gas gauge to work idk y


Could have voltage regulator behind the cowl.
If they are like automobiles that is your best bet.

Mar 09, 2015 | Cars & Trucks

1 Answer

2005 volkswagon jetta cooling fan wont turn off


temp switch fail most likely. fail safe keeps fan running so engine will not overheat. temp switch will be screwed into engine block. may be cover by cover, hoses or something else but pretty easy to replace. DO COLD for the sensor is in the collant port of the engine and will leak a little when changing. Good luck hope this helps.

Jul 17, 2014 | 2005 Volkswagen Jetta

1 Answer

How to remove the glove box from a 2006 porsche cayenne


Replacing the fan doesn't take many tools, just skill. The fan is under the passenger side dashboard. Remove the cover that is held in with a T25 screw. After removing the screw pry the cover down. Disconnect the light from the cover. Remove the foot vent under the dashboard by pulling it down. Using a 5.5mm socket remove the screws holding in the blower fan. Removing the fan can be very difficult because the main wire harness goes under one edge of the fan. When you get the fan out check it for water damage. When installing the new fan make sure it slides into the channel in the hva/c box. Working around the wire harness can be frustrating. After reassembling check that the fan works. There are 4 places water can leak into the fan. The hva/c water drain can be plugged. The wiper cowl cover at the base of the windshield can be unclipped from the windshield. And one of the two wiper cowl water drains can be plugged.

May 25, 2014 | 2004 Porsche Cayenne

2 Answers

I have a 2004 dodge 5.9 diesel 2500. The engine will not gain rpm and pull the air through the radiator to cool the engine, and keep the a/c running cool. I replaced the thermostat and flushed the...


I don't understand what you mean about the engine gaining RPM. Does it run alright, and just overheat with a/c on? If so, I would suspect your fan clutch. Hope this helps, TJ

Aug 08, 2011 | Dodge Ram Pickup 2500 Cars & Trucks

1 Answer

2001 dodge durango 4.7L SLT ..overheating..replaced electric fan ..coolant temp switch ..clutch on other fan...thermostat...filler tube ..radiator cap..burped system ..no signs of head gasket blown..and...


Well the only thing you haven't replaced is the water pump. The impellar can dislogde from the shaft or completely disinerate. this is not common but I have seen it. Mostly the impellar spinning on the shaft. this is one of those jobs you just have to take it apart and see. No way to check it that I know of.

Jun 16, 2011 | Dodge Durango Cars & Trucks

4 Answers

2004 dodge 1500 cabin air filter


the cabin air filter is located on the passenger side of the cowl. after opening the hood, remove the windshield wipers and the black covering ( 2 small T-30 screws, and a few body grommets). after you remove the cowl there will be a grey accordion looking filter in the cowl, remove that and replace with the new filter.

Apr 18, 2011 | 2004 Dodge Ram 1500

1 Answer

Need to change heater coil need a diagram to do so


  1. Drain the coolant. Refer to Draining and Filling Cooling System .
  2. Remove the instrument panel storage compartment.
  3. Disconnect the electrical connectors, as necessary.
  4. Remove the center floor air distribution duct.
  5. Remove the hinge pillar trim panels.
  6. Remove the blower motor cover.
  7. Remove the blower motor.
  8. Remove the steering column.
  9. Roll back the instrument panel. Refer to IP Carrier Replacement in Instrument Panel, Gauges and Console.
  10. Remove the coolant recovery reservoir.
  11. Remove the heater hoses.
  12. While holding the heater case to the cowl, remove the screw on the interior side of the cowl, near the evaporator pipe, if equipped.
    1. On the engine side of the cowl, remove the 4 screws that hold the heater case to the cowl.
    2. On the engine side of the cowl, remove the 2 nuts that hold the heater case to the cowl.
    3. Remove the heater case. Ask an assistant for help, if necessary.
    4. Remove the 7 screws that hold the heater cover to the heater case.
    5. Remove the heater cover.
    6. Remove the heater core from the retainer.
    7. Installing
      1. Install the heater core into the retainer.
      2. Install the 7 screws that hold the heater cover to the heater case. Replace the seals.
      3. Install the heater cover. Verify that the heater cover is properly sealed.
      4. Install the heater case. If necessary, ask an assistant for help.
      5. On the engine side of the cowl, install the nuts that hold the heater case to the cowl.
      6. On the engine side of the cowl, install the 4 screws that hold the heater case to the cowl.
        1. On the interior side of the cowl, install the screw.
        NOTE : Refer to Fastener Notice in Cautions and Notices.

        1. Tighten the following fasteners:
        Tighten
        • Tighten the screws on the engine side of the cowl to 1.9 N.m (17 lb in) .
        • Tighten the two nuts to 2.8 N.m (25 lb in) .
        • Tighten the screw on the interior side of the cowl to 11 N.m (97 lb in) .
        1. Install the heater hoses.
        2. Install the coolant recovery reservoir.
        3. Roll forward the instrument panel. Refer to IP Carrier Replacement in Instrument Panel, Gauges and Console.
        4. Install the steering column.
        5. Install the blower motor.
        6. Install the blower motor cover.
        7. Install the hinge pillar trim panels.
        8. Install the center floor air distribution duct.
        9. Connect the electrical connectors, as necessary.
        10. Install the instrument panel storage compartment.
        11. Add the engine coolant. Refer to Draining and Filling Cooling System
        12. Inspect the system for leaks.
        13. bonedivers_0.gifbonedivers_1.gifbonedivers_2.gifbonedivers_3.gif

Dec 15, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

I need help replacing my temp thremosta. The cowling fan cover is in the way...this is the instructions I was given to remove the fan. ~ "I have found putting a 32mm wrench on it and hitting it with a...


yes, use an impact wrench powered by an air compressor. This is how to do it professionally, anyway.

You see, the clutch is designed to spin for safety reasons.

Good luck to you.

Jul 10, 2010 | BMW 525 Cars & Trucks

1 Answer

My jeep 1999 has an electric fan and it keeps


have you checked that the rad is clear and air can flow through it freely,,,is it blocked up so the water cant flow through it freely ,is the fan realy working or sezed up so it cant turn round??
if all this is ok, they changing the temp censor or for a test run,,,short the fan temp censor plug out with a bit of whire this should start the fan up,,,(watch your fingers when doint this) go for a run to see if the motor stayes cool

Jun 29, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Leak at bottom of water expansion tank on 2001 s-type se


SECTION 303-03: Engine Cooling 2001 Lincoln LS Workshop Manual REMOVAL AND INSTALLATION Degas Bottle Removal and Installation
  1. Drain the engine cooling system. For additional information, refer to Cooling System Draining, Filling And Bleeding in this section.
  1. Remove the cowl vent screen. For additional information, refer to Section 501-02 .
Cowl Vent Screen Removal
NOTE: To remove the left side cowl vent screen, the right cowl vent screen must be removed first. Follow the entire cowl vent screen procedure.
Right Side Only
  1. NOTE: The fasteners are reuseable.
    Remove the right side of the cowl vent screen.
    1. Remove the two-part pin-type retainers and separate the Velcro ® attachment of the rubber hinge cover to the rear outboard corner of the cowl vent screen.
    1. Pull up on the cowl vent screen to release the lower clips.
Entire Cowl Vent Screen
  1. Remove the two wiper pivot arms.
    1. Remove the two pivot arm nut covers.
    1. Remove the two nuts.
    1. Remove the two wiper pivot arms.
  1. NOTE: Remove the right side first when removing the entire cowl vent screen.
    Remove the cowl vent screen.
    1. Remove the two-part pin-type retainers and separate the Velcro® attachment of the rubber hinge cover to the rear outboard corner of the cowl vent screen.
    1. Lift up on the cowl vent screen to release the clips.
  1. Disconnect the engine vent hose, and separate the air bleed hose from the degas bottle.
  1. Remove the seven bolts and reposition the cross vehicle support.
  1. Disconnect the degas return hose from the degas return tube.
  1. Remove the two bolts.
  1. Remove the degas bottle from the vehicle.

Apr 12, 2009 | 2001 Jaguar S-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...