Question about 1992 Audi 100

1 Answer

Have a 1992 CS 100 that wont turn over. Battery is new and everything has power. Runs good if push started but will not start once turned off. Any ideas?

Posted by on

  • NoTalent Jul 10, 2010

    This morning it started working intermittently. When it fails I hear a brief electric spark noise under the dash. Is there a starter relay underneath the dash?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

First bypass fusible link to see if it's at fault then, if it still don't start,your starter should be tested. it takes a good starter to turn the engine over.

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why doesn't my honda accord start. i didn't have any problems with it starting prior to changing the battery and now the starter wont turn over even with a jump start. everything works with ne


you most likely have a lose or bad connection. clean and tighten clamps on battery. push them down and wiggle them while lose then tighten.

Sep 24, 2012 | 1995 Honda Accord

2 Answers

Why won't my car start without getting a jump? Once I get it jumped it runs really good but when I turn it off and try to start it again, it won't start. I have a new battery and a new alternator...


Buy yourself a volt meter and check the batter voltage before and after it starts. You should read 12 volts before starting and around 14 volts once it starts and the alternator is charging the battery. Also check for loose connections between the alternator and battery. Check that the ground wire from the battery is secured to the vehicles frame. Good luck!

Oct 18, 2011 | 1987 Audi 5000 CS

1 Answer

The car wont start battery is good post are new and it wont start light on dash board are working what could it be


check the starter solenoid to see if you get power when youre in start position single wire 18g small wire on the starter use test light have someone else turn key to start if you have power replace starter check there first

Jan 14, 2011 | 1992 Mazda 323

1 Answer

Same problem. 1992 nissan kingcab with v-6. starter and battery good-had them tested. Wires clean. new ignition switch-needed it. turned over once, once only still clicks when key is turned. Help


By wires clean do you mean battery termanal wires?
This sounds way to much like the battery cable ends need to be cleaned. Not only the inside of the termanal ends but the posts as well as take the ends off the cables and clean the copper wires where they connect. Then follow the positive cable to the solinoid and check connections coming in and going out to the starter. Check where it connects to the starter and tighten if needed. If none of these does the trick will it start with a jump? If not will it start with a push if it is a standard shift? Let me know how it turns out, Good Luck, The Raz

Apr 17, 2010 | 1992 Nissan King Cab

1 Answer

92 olds achieva wont start


sounds luke you need a comprestion test get back to me with mor info

Feb 27, 2010 | 1992 Oldsmobile Achieva

1 Answer

92 jeep wrangler has power but wont turn over to start


The terms "turning over" and starting are often confused... Cranking (turning over) is when the starter turns the engine, regardless of the end result. Starting is when the engine actually runs (even if for a moment).
If your problem is that the engine is turning when the starter is engaged, but not starting, then you have either a fuel or spark fault.
If the engine is not turning, check that the battery has a full charge, and holds adequate power when loaded, that proper voltage is reaching the starter and there is a good engine ground. Power should also be present at the small trigger wire on the starter when ign key is turned to start position.After checking these things you can begin to make a decision on what needs attention and proceed from there.

Feb 28, 2009 | 1992 Jeep Wrangler

2 Answers

Bought a new battery and my 1992 buick lesabre still won't start


it possable you need new cable i dont know your car.
The battery cable can make so you car will not get the power need to start or turn on lights.

Aug 25, 2008 | 1992 Buick LeSabre

Not finding what you are looking for?
1992 Audi 100 Logo

Related Topics:

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14381 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...