Question about 1996 Dodge Intrepid

2 Answers

Car does not start, nothing electrical works.

I have a 96 dodge intrepid ES and it does not start, nothing electrical works. when key is in ignition and turned to start point nothing comes on and theres no sound from engine or starter. The battery is in good condition. The fuses by the steering wheel and under the hood seem to be in good condition. Ill wait for a response. Thanks for your time.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

Have you tried jumping the vehicle? The battery can have 12 volts and appear good but not have enough amperage to turn the motor over. If it won't work with a jump remove the starter and take it to Auto Zone and have it tested.

Posted on Jul 09, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 454 Answers

Try placing the gear selector in nuetral. The park switch might be bad.

Posted on Jul 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dtc Code P2314


2002 Dodge Intrepid Ignition Coil Circuit Codes: Electrical ...

www.2carpros.com/.../dodge-intrepid-2002-dodge-intrepid-ignition-coil...
Aug 13, 2008 - 2002 Dodge Intrepid 6 cyl Front Wheel Drive Automatic 130000 miles. Getting the following codes. P0353 P2302 P2305 P2308 P2311 P2314

What are 2002 Dodge Intrepid trouble codes PO442 and ...

www.answers.com > ... > American Cars > Dodge > Dodge Intrepid
What does the Error Code P0846 on 2002 Dodge Intrepid mean? .... Trouble code P2314 means: Ignition coil E, secondary circuit - malfunction Trouble code .

Oct 29, 2015 | 2002 Dodge Intrepid

2 Answers

I have a 2000 dodge intrepid es. I have been having problems with it not starting the lights come on but when you go to turn it on everything goes dead. i have replaced the starter ignition wires, and the...


Check all electrical connection from battery pos to starter sol from battery neg to engine neg . sound as if you have battery terminal problems .

Jun 05, 2011 | 2000 Dodge Intrepid

1 Answer

My 96 Dodge Intrepid will not start. When it does it will only run for a minute or two and then die. I have changed the ignition coil and it is still doing the same thing.


A failing fuel pump will do this.
Check the fuel level.
A weak pump will not work well below 1/3 tank of fuel.
==== Clean air filter will help rule out air restriction problem.

Mar 05, 2011 | 1996 Dodge Intrepid

1 Answer

My 1995 intrepid es tries to start, and sometimes it will, but only a few seconds. seems like if you let it sit a little while it will run a couple seconds then quit.


possibly the fuel pump. here's a hint for code reading on a intrepid older than a 96. put the key in the ignition and turn in on without starting the engine. in this order

ON
OFF
ON
OFF
ON

then leave it in the on position. the check engine light will start flashing a mourse code at you. count them. all codes should be read as double digits. so if it blinks three times then pauses and blinks another four the code is 34. and the code reading will end at 55. write down the numbers and look them up.

Aug 19, 2010 | 1995 Dodge Intrepid

1 Answer

I had a new key made and it turns on the car but wont start it....if this is a computer issue is there anyway to bypass it? 1999 dodge intrepid es


Easy way to tell, look at your originally keys. When they first started using key chips as a security feature the keys with black covers where normal keys but if your original key had a gray rubber type cover it has a security chip in it. That means the only place to get a spare key made is the dealer because they have to order the key using your VIN. The only way to bypass this is to replace the ignition switch and the ECM. The ECM will cost $1600 + on it's own.

Jul 24, 2010 | 1999 Dodge Intrepid

2 Answers

If the ignition module is bad will the tach still work 96 intrepid 3.5 engine when turning it over it wont start


I had a 97 3.5 that the timing belt went out it would still turn over but wouldn't start

Jan 20, 2010 | 1996 Dodge Intrepid

2 Answers

Dodge Intrepid 1998 2.7 V6. Won't start. you turn ignition key, it send power but not rich the starter. No ground on under hood fuse box. I did bypass to fuel pump, TCM shoot down and automatic shoot down...


make sure you have spark, sometimes if you start bypassing stuff the ignition works only on a resistor to much electricity and it won't work, not enough and it won't work.

Nov 09, 2009 | 1998 Dodge Intrepid

1 Answer

96 intrepid wont start


have you tried cranking the car with a "known good battery". you say it doesnt even turn over. I suspect by just that, that the connections are poor or the battery is too weak.
DC current needs very good conections to flow good. that is one big difference between AC and DC electricity.

Jun 10, 2009 | 1996 Dodge Intrepid

1 Answer

2000 Dodge Intrepid Wont Start


first of all, check your code to see what the car computer shows. To do that , insert the key in the ignition and switch it on three time within 2 seconds and the third time live the key in the on position. All the instrument panel lights will lite and the oddometer will display the fault code that may br the cause for your car not starting. goood luck.

Apr 29, 2009 | 2000 Dodge Intrepid

Not finding what you are looking for?
1996 Dodge Intrepid Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...