Question about 2004 Ford Explorer

1 Answer

How do I change front hub and bearing assembly on 2004 Explorer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Front hub bearing, remove tire, remove caliper and caliper holding bracket, you do not have to remove brake caliper from brake hose, just set it aside, if 4X4 remove front axle nut that goes through center of rotor, also remove brake rotor, disconnect elec, A.B.S connector, remove three bolts on back side of hub bearing, remove hub bearing, some times you will need to knock hub bearing out with a hammer.Reverse to install new hub bearing.

Posted on Jul 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2wd.how to replace front wheel bearing assembly


There are a number of videos...
For RWD front hubs. (F250 will just have larger bolts.)

How To Install Replace Front Wheel Bearing Hub Assembly 2004-08 Ford F150
For 4x4 front hubs.

Ford Super Duty hub bearing replacement Driver side

May 06, 2016 | 2005 Ford F 250 Super Duty

2 Answers

Is it possible to replace a front wheel bearing at home on a 2004 Chevy Trailblazer?


You would be better off replacing the entire hub assembly. Yes, bearings need to be pressed into place and this requires a hydraulic press.

Dec 19, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

How much do front wheel bearing sensor run for a 2004 chevy impala


On the 2004 impala the ABS sensor comes attached to the wheel bearing hub assembly. the hub assembly is around 100 dollars. If you are referring to the wheel speed sensor it is around 25 dollars.

Jul 03, 2011 | 2004 Chevrolet Impala

1 Answer

How hard to change wheel hub (front) and how long to change?


Should only take about an hour, remove tire then remove caliper and caliper mounting bracket, remove brake rotor, on back side of hub bearing there is there bolt's that hold hub bearing remove bolt's and unplug A.B.S connector, slide bearing outwards some time you will need a hammer to knock it out then install new one.

May 27, 2010 | 2004 Ford Explorer

1 Answer

2wd front wheel need to replace bearings or hub assembly which is best


A Front Wheel Drive Vehicle Can Have Two Types Of Rear Wheel Bearings: Serviceable Bearings, Or Nonserviceable, Sealed Bearings. When Sealed Bearings Fail, The Bolts Holding The Bearing And Hub To The Axel Or Control Arm Must Be Removed. When Installing The New Bearing Assembly, Torque The Bolts To Specifications.Some Manufacturers require The Use Of New Fasteners When Rear Bearings And Hubs Are Replaced.

When A Serviceable Wheel Bearing Is Used, The Bearing Can Be Disassembled And Packed With Grease.It Is Serviced Like A Front Wheel Bearing On A Rear-wheel-Drive-Car.

Apr 09, 2010 | 2003 Ford Explorer Sport Trac

1 Answer

2004 silverado 4x4 2500 left front wheel bearing


  1. Raise and support the vehicle.
  2. Remove or disconnect the following:

    Tire and wheel assembly Caliper and rotor Wheel speed sensor and brake hose mounting bracket bolt from the steering knuckle Electrical connection for the wheel speed sensor Front drive halfshaft assembly on four wheel drive models Hub and bearing assembly mounting bolts Hub and bearing assembly O-ring seal from the steering knuckle bore (2500 series)
  3. Clean and inspect the O-ring seal
To install:
  1. Clean all corrosion or contaminates from the steering knuckle bore and the hub and bearing assembly.
  2. Install the O-ring to the steering knuckle (2500 series).
  3. Lubricate the steering knuckle bore with wheel bearing grease or the equivalent.
  4. Install or connect the following:

    Hub and bearing assembly Hub and bearing assembly mounting bolts. Tighten the bolts to 133 ft. lbs. (180 Nm). Front drive halfshaft assembly on four wheel drive models Electrical connection for the wheel speed sensor Wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle. Tighten to 106 inch lbs. (12 Nm). Rotor Tire and wheel assembly.
You can go to autozone.com and register for free online repair manual with everything you need.

Jan 19, 2010 | 2004 Chevrolet Silverado 2500 Crew Cab

1 Answer

How do I replace the hub assy on a 2004 ford explorer AWD?


Hi,
I was referring to the Haynes Repair Manual #36025, Ford Explorer 2002-2006, Chapter 10, "Hub and bearing assembly (rear) replacement": Due to the special tools and expertise required to press the hub and bearing from the rear knuckle, this job should be left to a professional mechanic. However, the knuckle may be removed and taken to an automotive machine shop or other qualified repair facility equipped with the necessary tools.

Thank You for contacting Fixya.com

Aug 03, 2009 | 2004 Ford Explorer

2 Answers

My 04 ford explorer is making a loud humming noise when driving. The noise is coming from front and gets louder the faster you drive.


Try to rotate the tires to rule that out.If not then it sounds like the wheel bearing is going out, on some cars you can replace the bearings on others youi have to replace the hub assembly

Mar 25, 2009 | 2004 Ford Explorer

Not finding what you are looking for?
2004 Ford Explorer Logo

740 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...