Question about 2003 Nissan Murano

1 Answer

The entire lock kit is falling out on driver side Murano. The remote unlocks all but the driver door at times. Other times the door will not open and I am forced to use the key to manually unlock my driver side door. Nissan claims to know nothing about door lock problems, the dealer wants $92.00 to diagnose the problem. HELP

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 518 Answers

Open drivers door, locate plastic plug on inside of door, near latch, across from door lock cylinder. Pop it out. There is a set screw that retains lock cylinder. Tighten set screw.

Posted on Jul 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Murano back doors will not lock or open at times with or without the the remote


I would think the door lock actuator motors are sticking, they are very lightly built little toys.

Sep 12, 2016 | 2005 Nissan Murano

1 Answer

Nissan Murano (05) Power Locks Sticking


The door lock actuator in that door is weak. Need to replace it.

Jan 31, 2010 | Nissan Murano Cars & Trucks

1 Answer

2003 Nissan Murano hatch back door won't unlock or open. Glitchy for a long time, always opened eventually with a ritual of locking/unlocking using the remote/lock on the door, etc. Upon opening,...


I have a 2004 Murano. I opened the small hatch and with a screw driver and someone on the outside managed to open the hatch. The problem appears to be bent pieces inside. After straightening them out and using a good silicon spray, mine works again. It should be lubricated quite frequently.

Nov 05, 2009 | Nissan Murano Cars & Trucks

2 Answers

Driver side window won't raise up!


Hi

Thanks for using FixYa. To resolve the issue you are facing with push the unlock button once on the factory remote=unlock all 4 doors. Hit unlock a second time=all four windows down. When exiting vehicle hit the lock button on remote=all 4 windows all the way up. Also, all four window controls on the driver’s door panel are one touch up and down on master window switch. Remove the door panel by prying it off. But be careful not to damage the panel. Now unscrew the top of the panel and the area by the arm rest. Once you get the panel off, then you will see how the switch is mounted into the door panel from inside. If the switch has gone bad this is required to be replaced. Remove the old switch and connect the new one.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

Aug 09, 2009 | 2005 Nissan Murano

2 Answers

2003 Nissan Murano Driver door won't lock or unlock with keyfob


The key fob is the remote. But the remote type that works like a key. The remotes that you just need to carry on you to start the car or truck. That is a Key Fob.

Thanks Jay!

Jul 30, 2009 | 2005 Nissan Murano

1 Answer

My 2005 Nissan Murano seems to be possessed. The


Replace the remote battery first, then the remote.

Jul 03, 2009 | 2005 Nissan Murano

1 Answer

How do I remove the inside door panel on drivers side


you need to take out the door panal and work from the inside of the panal. Open it from there.

Jan 11, 2009 | 2001 Mercury Grand Marquis

2 Answers

Nissan Murano 2005 SL keyless entry remote programing, got a used remote, how can I program it?


Close all vehicle doors, LOCK doors using drivers side switch.

Insert key all the way into the ignition, (do not turn) remove key.

Repeat this step 5 times. (6 total)

Hazards should flash to indicate program mode.

Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.

*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press any button on remote, hazards should flash. Repeat step as necessary.

Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.

Source

Aug 06, 2008 | 2005 Nissan Murano

Not finding what you are looking for?
2003 Nissan Murano Logo

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...