Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 93 buick century -turn signals
The Buick Century uses separate relays for the hazard warning and turn signal functions. The turn signal relay is located on the accelerator pedal bracket, and the 4-way flasher relay is located on the convenience center near the left kick panel. Try switching these two relays with one another to see if your turn signals work instead of your 4-ways.
Posted on Sep 28, 2008
SOURCE: 1998 Buick Century Signal Issue
Remove the bulbs one at a time and check for dirt and corrosion at the contacs inside the sockets.The corrosion will cause higher than normal resistence and will make the signal to flash rapidly.As this only happens to the right side only check the right side.
Posted on Jun 25, 2008
the flasher is behind the dash where the steering column goes. It's hard to get at and harder to remove. They just can't make these things easy, can they?
Posted on Dec 02, 2008
You have to take the gaurd off underneath the steering wheel to exspose the wires, You should see the fuse there.
Posted on Mar 16, 2009
Hi, both flashers are located on the driver side, under the dash, hazard flasher mounted above kick panel, turn signal flasher on pass. side of steering column mounted above accelerator cable.
Posted on May 05, 2009
Tips for a great answer:
Aug 14, 2012 | 2004 Buick Century
Apr 03, 2012 | 2000 Buick Century
Mar 20, 2012 | 2001 Buick Century
Apr 10, 2010 | 1997 Buick Century
Dec 11, 2009 | 1996 Buick Century
May 05, 2009 | Buick Century Cars & Trucks
Feb 23, 2009 | 1990 Buick Century
Sep 28, 2008 | 1993 Buick Century
504 people viewed this question
Usually answered in minutes!