Question about 1997 Chevrolet Venture

2 Answers

I have a 97 Chevy Venture Van with a weakening fuel level sensor.

I have a 97 Chevy Venture Van with a deteriating fuel level sensor(fuel guage moves erradically).
Is this a sign that the fuel pump will fail in the near future?

I've read that the fuel sensor can be replaced independantly from the fuel pump without R+R of a new complete fuel pump. Is this true?

Thanks for all your efforts in answering my questions:)

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

To the 97 venture fan not blowing. You asked three question that need verified. get your self a 12 volt test light. there simple then you verify voltage at the fan.if so most likely its your fan if you can use a volt ohm meter ck resistor at the motor usealy any reading is acceptable. The resistor you spoke of is most likely your speeds. If nothing else run a jumper to the fan from the battery.

Posted on Jan 30, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

No it's not, if your van is running fine, fuel pump is good, just the fuel gauge sending unit is bad, to repair, the gas tank will have to come off, the sending unit sit on the same hanger the fuel pump is on.

Posted on Jul 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace coolant level sensor


19eff3a2-3bb7-404c-a6e6-ec317b2a2ade.jpg
remove the clip behind remove electrical connector then pull on level senor
caution need to lower antifreeze first before removing
hope it helps

Apr 03, 2014 | 1997 Chevrolet Venture

2 Answers

Van will start but not stay running 97 chevy venture


If it starts for 5 seconds out less, and you notice a security light on the dash, go to this link for answers. Gm are notorious for failing antitheft systems http://vatspasslockpasskeysecurityhelp.yolasite.com/

Oct 02, 2011 | 1997 Chevrolet Venture

1 Answer

Fuel gauge on 2004 Chevy Venture Van jumps all over not showing correct fuel amounts


I have a 2004 venture ext. van and the fuel gauge doesn't work. Any suggestions?

Oct 03, 2010 | 2004 Chevrolet Venture

3 Answers

2000 chevy venture doesnt start


check to make sure the security light is not on if it is the van will have spark but no injecter pulse the best way to solve this issue is to have the original igniton key and put it in the igniton in the run position and leave it on for 10 minutes then the light will flash then try to start the van

Jul 15, 2009 | 2001 Chevrolet Venture

2 Answers

I ran a Diagnostic on my 1998 chevy venture mini van and here are the codes that came up, P0102, P0134. What does this mean? I have already replaced the following, fuel pressure regulator, both crankshaft...


the 2 codes are

P0134 02 Sensor Circuit no activity Detected (bank 1 sensor 1)
first check your fuses check the wiring to the sensor(the sensor is on the exhaust in front of the engine-open the hood and look down) if the fuses and the wiring look good replace the O2 sensor there are 2 types of sensors original equipment(oe) style and universal the oe style has a connector you just plug in, the universal you have to hard wire in

the 2nd code is Mass Air Flow (MAF) Circuit Low Input
check the wireing, make shure theres a good connections
you said that you already replaced this sensor so im going to recomend that you go after the other code first

deal with the oxygen sensor then reset the computer and see what codes come back

May 17, 2009 | 1998 Chevrolet Venture Cargo

2 Answers

Van heating up and then cooling off?


sounds like your low in coolant. this will cause an air pocket in engine and cause erratic temp readings/loss of heat check coolant in radiator when cold. and add

Dec 09, 2008 | 2001 Chevrolet Venture

1 Answer

97 Silhouette Fuel guage not working correctly


drop fuel tank. if guage moves all around its probably the fuel level sensor on fuel pump assembly in the fuel tank. If the guage stay's in one spot its the guage , replace instrument cluster assembly. you can take just the glass off the cluster and move the fuel guage needle and it will work (if stuck) but for how long? The wires to the guage come from the sending unit to the power train control module to the instrument cluster. pray its not in the wiring.

Sep 14, 2008 | 2000 Oldsmobile Silhouette

1 Answer

2000 chevy venture van- It starts, but will not idle.


Hi , this can be caused by a bad, tps (trottle position sensor)also can check fuel presure and fuel filter,good luck.......

Aug 31, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
1997 Chevrolet Venture Logo

656 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...