Question about Cars & Trucks

Open Question

I have a 1983 Range Rover and need to change a fuse (headlight issues). Cannot locate the fuse box!! Please help..... Where is it?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 193 Answers

SOURCE: fuse box location

The fuse box or panel, is located under the dash on the far left, next to the parking brake release handle. Looking in this area, you will notic a small black plastic panel. Remove this panel and you will see the fuses.

There is a second fuse panel under the hood, up against the firewall. Remove the large black plastic panel and you will find a row of relays, and a number of large type fuses.
Bill

Posted on Nov 18, 2008

ginko
  • 19396 Answers

SOURCE: fuse box location in a 99 land rover discovery

There are two fuse boxes. One in the engine compartment and one under the dash on passenger side.

You can find all parts for your Discovery here.

Posted on Mar 05, 2009

  • 249 Answers

SOURCE: range rover 2003 transfer in neutral help please

hi, this is a long shot so dont give me negative if no joy.
on the p38 they suffer from a bad electronic selector.
now, i do not have a clue what gear box or transfer you have.
any way if you look at your transfer, beside where the prop comes out, is ther like a window wiper motor with 6 wires.
if so they get stuck, rust or dirt etc.
have you checked your fuses, alos i would add. again not sure on your model.
in the fuse box there is a blank fuse, when inserted it shifts it to neutral.
the dealers wont tell you where it is.
have you put any fuses in etc, i did this 5 year ago, a p38 was jump started, leads wrong way.
i got a call as the aa did not want to help anymore. aa had a hand full of fuses out, i stuck in were contacts were. after new ecu had no drive.
you are sure its not a gearbox fault, get back to me if not sure, i can tell you how to test this.

Posted on Aug 17, 2009

  • 1 Answer

SOURCE: my 197 range rover wont start -replaced fuse box

hi i have a range rover p38 2.5 diesel it starts but wont drive when you put in drive

Posted on Aug 31, 2009

  • 1757 Answers

SOURCE: how do i change drive belt on p38 range rover

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

Not sure if this what you need for the "P38" but it is for the 1996 Range Rover.

I do not know if you still need this information, but I am going ahead and answering it anyway.


Click on the following Link. It has the several Serpentine Belt Diagrams, one of which matches your specific vehicle with your particular options (AC, Power Steering etc..).

Regarding HOW:
Standard Rule to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Rotate/Move the Tensioner away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys
.
Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.

b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped...

http://www.2carpros.com/car_repair_information/year/1996/make/land_rover/model/range_rover/1996_land_rover_range_rover_drive_belt_routing_diagram.htm

Posted on Mar 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 range rover p38 under seat fuse box diagram


Need help locating fuse #8 on 1997 Range Rover hse for the car lighter, climate control, & radio. Please help? Thank you

May 27, 2013 | Cars & Trucks

2 Answers

I have a 1999 range rover 4.0 se and 4.6 hse .i tried to trun it on but it wont start the battery wrks good its wont do a spark thy told me it might need to replace the fuse box or my alram need to be...


I have a 1998 Range Rover Se i am have a problem with the rover not wanting to start. I check all the fuses and relay but the starter is not getting any fire to it what could be my problem.

Apr 13, 2012 | 1999 Land Rover Range Rover

1 Answer

How many fuse box do a 2006 range rover sport have and where are them


hey guys really need major help...2006 range rover sport hse radio audio keeps on coming on and off..ive checked and tested fuse and still no luck ...what did i miss ? is there something else i need to look?

Nov 29, 2011 | 2006 Land Rover Range Rover Sport

1 Answer

Cigarette lighter fuse location for 2007 range rover sport


range rover sports 2005-2009 cigarette lighter is number 55 on fuse box and is a 15amp,the car takes bussman fuses(ie) small fuses

Nov 17, 2011 | 2007 Land Rover Range Rover Sport...

1 Answer

2003 range rover HSE...radio used to turn on and off at will...now I'm no longer able to turn it on...GPS workign fine...Is this a radio issue or an Amp issue? would i need to replace to complete display...


if the radio is not working then it's the Radio module located on the rear (tail) on the left. you need to replace that to have your radio back to normal. but before that try to remover the fuse and fix it back as sometimes it gets stuck internally..the fuse located in the glove box. open the led and read which fuse for the radio

May 18, 2010 | 2003 Land Rover Range Rover

1 Answer

All lights flicker in my 98 Range Rover


sounds like a ground problem. there is more than 1 ground wire on them

Oct 05, 2009 | 1998 Land Rover Range Rover

1 Answer

2003 range rover headlight wiper blade driver side won't go down


Replace the fuse for the "Headlight Cleaning" circuit in the fuse box located inside the glove compartment on passanger side front. It should be fuse number 28 with an Amp Rating of 30. See Owner's Manual under Fuses.

Sep 06, 2009 | 2003 Land Rover Range Rover

1 Answer

Windows,sunroor and mirrors have just stoped working can enyone help please


This sounds exactly like a blown fuse. Locate your fuse box and it should have a legend on the fuse box cover. You're looking for "windows" or "accessories" or something similar. Be sure to replace the blown fuse with one of the exact same rating (don't stick a "50A" fuse in to replace a "20A" one!)

I can't get much more specific without more specific info about the model and year of your Range Rover.

Aug 04, 2009 | Land Rover Range Rover Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...