Question about 1999 Mercury Mystique

Open Question

How do i remove the rotors on my 1999 mercury mystique

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: how hard to remove a

YOU HAVE TO REMOVE TIMING BELT.NOT A HARD JOB BUT YOU NEED A REPAIR MANUAL TO LOOK AT TIMING BELT TIMING MARKS LOCATION ON CAMSHAFTS CHAIN SPROCKETS AND CRANKSHAFT GEAR TIMING MARKS.

Posted on Oct 26, 2010

chuckster57
  • 1102 Answers

SOURCE: can i change the fuel pump on a 1999 mercury

From what I can tell you can get to it by removing the back seat.

Posted on Jan 01, 2011

  • 1 Answer

SOURCE: 1995 mercury mystique starter replacement process?

At first, it looks like an impossible task, however if you start by removing the positive battery cable, then unplug mass air flow sensor, carefully remove air filter box and its components from the throttle body. from there you should be able to see the starter better and have more room to work and get it out. You can take the battery right out if you want a little more working space for your elbows. take the wires off the solenoid, sometimes the old studs of solenoid will break due to corrosion. remove the two 13mm bolts that hold the startersome models have one at the bottom also that you will need to access from the bottom side.

Posted on Nov 06, 2011

Biggdex35
  • 333 Answers

SOURCE: Trouble removing the bolt from the camshaft pulley on Mercury Mystique

Im not positive but I think it is backward threaded you have to turn it clockwise.

Posted on Dec 11, 2011

chrismcgoogl
  • 4 Answers

SOURCE: how to check timing chain wear on 1999 mystique mercury

i go by how much play it has. if it moves to the side more than 3/4 of an inch u should get it tightened or replaced

Posted on Apr 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 mercury mystique with p1380 code.


On the 1999 mercury mystique I don't believe the timing is adjustable? Your PCM (powertrain control module) will take care of it.

Mar 01, 2014 | Mercury Cars & Trucks

1 Answer

How to check timing chain wear on 1999 mystique mercury


i go by how much play it has. if it moves to the side more than 3/4 of an inch u should get it tightened or replaced

Apr 19, 2012 | 1999 Mercury Mystique

1 Answer

Trouble removing the bolt from the camshaft pulley on Mercury Mystique


Im not positive but I think it is backward threaded you have to turn it clockwise.

Dec 11, 2011 | 2000 Mercury Mystique

1 Answer

How hard to remove a waterpump on a mercury mystique 1999


YOU HAVE TO REMOVE TIMING BELT.NOT A HARD JOB BUT YOU NEED A REPAIR MANUAL TO LOOK AT TIMING BELT TIMING MARKS LOCATION ON CAMSHAFTS CHAIN SPROCKETS AND CRANKSHAFT GEAR TIMING MARKS.

Oct 26, 2010 | 1999 Mercury Mystique

1 Answer

What is the torque spec on front wheel bearing on 1999 mercury mystique?


you need to seat the bearings with ~ 60lbs of torque while spinning the rotor. Then back off the nut 1 flat ..

Aug 26, 2010 | 1999 Mercury Mystique

1 Answer

What size is the alternator belt for a 1999 mercury mystique with an air conditioner


For the 1999 Mercury Mystique with AC.
Belt Dimensions:
For the 2.0L In-Line 4-Cylinder Engine: 83.1 inches.
For the 2.5L V6: 71.5 inches.

May 13, 2010 | 1999 Mercury Mystique

1 Answer

I cant separate the ball joint from the spindle on my 2000 mercury mystique


you need a ball joint fork, this goes between the spindle and the balljiont then you hit it with a hammer to split, also a assume you removed the bolt from the spindle holding the balljoint,

Jan 24, 2010 | 1999 Mercury Mystique

1 Answer

How do you take off the front hub on a mercury mystique


the sindle has to be removed then the hub is pressed out and so is the bearing here is a picture.eb80942.gif

Jan 16, 2010 | 1999 Mercury Mystique

1 Answer

Smelled mild burning, lost antifreeze - engine temp Hot. I looked under car and noticed a serverly frayed Belt - NOT the big surpentine belt - another small belt on the driver's side. 1999 Mercury Mystique...


For the 1999 Mercury Mystique Water Pump Belt on 2.5L V6 Engine:

Probable Causes: Belt: worn out, started slipping. Overheating caused by failure of Belt. Lost antifreeze: caused by failure of belt, not turning Water Pump Pulley, not circulating anitfreeze, which resulted in overheating.

Click on the following free direct Link. It has the Serpentine & Drive Belt Diagrams and Tensioners for your 2.5L Engine.
Scroll down the Page (about 1/3rd down) to Diagram #G99H08189, it shows the specific Water Pump Belt.
Note the Tensioner.
http://www.2carpros.com/car_repair_information/year/1999/make/mercury/model/mystique/1999_mercury_mystique_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Jun 03, 2009 | 1999 Mercury Mystique

Not finding what you are looking for?
1999 Mercury Mystique Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...