Question about 2004 Ford Explorer

1 Answer

My break lights on 2004 ford explorer will not turn off

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 880 Answers

The brake light switch is out of adjustment or faulty. The switch is under the drivers side dash and above the brake pedal arm. Look there with a light and you will see it. It is held in place with a nut on each side of the plunger. This is also how you adjust the switch. It should be adjusted so that the lights are activated when the brake pedal is depressed about 1/2 inch. If adjustment will not cure the problem replace the switch.

Posted on Jul 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to see a diagram for a 2004 ford explorer


User manual shows fuse panels and associated fuse for DB lights

Apr 24, 2014 | 2004 Ford Explorer

1 Answer

2004 Ford Explorer ABS, Service Engine Soon lights stay on and the 4x4 light flashes. Why?


Abs is bad sensor in hub bearing,engine light you need obd 2 scanner to read and reset code,

May 11, 2013 | 2004 Ford Explorer

1 Answer

Where is the egr vavle located on a ford 2004 expolorer


Here's a pic of it on a 2004 Explorer Sport Trac. It's the part on the right of the 4.0L SOHC cover. It's a coppery color. Held on by two small bolts and then you'll need a big wrench to break the exhaust pipe part of it loose. Be careful. Those can brake. Spray some WD40 on it before you break it loose.

http://images.gtcarlot.com/pictures/39785909.jpg

Sep 17, 2012 | 2004 Ford Explorer

1 Answer

I have a 2004 F 150 crew cab and my brake lights don't work. I have replaced the bulb and fuse but no lighs


there is a switch mounted above your break pedel .install that break stop switch and you should be good.

Sep 02, 2011 | 2000 Ford Explorer

3 Answers

2004 Ford Explorer ABS light on constantly and


I just had the same exact problem. The ABS light was on constanly, and the 4x4 high light flashes about 8 times, turns off for about 2-5 minutes, then flashes again for another 8 times and keeps repeating. In addition, I was also hearing and feeling a grinding and clunking noise going in reverse, and the steering wheel was difficult to turn. I changed a bad hub assembly on the front driver side and everything went away...fixed! I wouldn't let anybody tell me that the ABS system and the 4x4 system are not linked together. In fact, my local Ford service department assured me that I had two separate issues. Well, I only had one issue and it was a bad ABS sensor. I hope my exprience helps you.

Aug 02, 2010 | 2004 Ford Explorer

1 Answer

2003 ford explorer


Most likely the stop light switch is stuck.

May 14, 2009 | 2003 Ford Explorer

1 Answer

Right read blinker/break light dont work, turn signal blinks rapidly


It's the bulb. There are two filliments in the bulb. One is for when you turn your lights on and the other is for breaking and blinker flashing. When the break filliment goes bad it causes the blinker to flash very rapidly. 100% the bulb. Change it and all will be good again. P.S. if it were a fuse none of the break lights or blinkers would work.

Apr 20, 2009 | 2005 Ford Explorer

2 Answers

2004 ford explorer gas pedal dosen't work even after replacing it


I had this problem too with my 2004 Explorer
Don't know if it had anything to do with it,but i had washed down the engine compartment the previous afternoon. After having it towed to the dealership they told me it was the throttle body.They replaced it and all is good
richt

Oct 16, 2008 | 2004 Ford Explorer

Not finding what you are looking for?
2004 Ford Explorer Logo

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...