Question about 1991 Peugeot 405

1 Answer

Abs pump fault Peugeot 406 1998 gtx - 1991 Peugeot 405

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 107 Answers

These pumps rarely fail, if you just have an abs warning light on it is more than likely it is just a wheel sensor that is the problem any local diagnostic place should be able to tell you which wheel is a fault, this model also had a problem with the toothed ring on the outer end of drive shaft splitting and allowing the ring to stop turning, somtimes a little spot weld cures it if not it comes as part of the shaft which has to be replaced unfortunately

Posted on Jul 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Peugeot 206 cc is displaying Breaking fault on the dashboard but I have changed both breaking disks and pads. What might be still the problem.


it could be the ABS system, the proportioning valve in the brake system, low fluid in the reservoir.
run the fault codes to find the reason.

Mar 07, 2015 | Peugeot 206 Cars & Trucks

1 Answer

How to fix error code C1380 ABS pump fault


heya u should just need to change the abs pump.....u might not even need to change it as these faults just happen for no reason other than a dirty sensor..... ur ecu ye you dnt need to change try ur brake pads first start wit the cheapest and work ur way through the brakeing system b4 buying any parts hope it helps

May 07, 2014 | 2004 Peugeot 206

2 Answers

PEUGEOT 307 FUSE KEEPS BLOWING (abs faults, horn doesnt work)


i have a peugeot 307 number 8 fuse keeps blowing so i have to keep changing the 20 amp fuse please help me i am trying to find out what is causing this

Dec 07, 2012 | 2002 Peugeot 307

1 Answer

Hi I have a peugeot 206 02 gti my abs light has come on and it sometimes flashes up and says ABS fault does this mean I need to replace dics and pads?


yes more then likly the pads have a wire on them and when the pads waer down it compleates a circuit and the light comes on pads are easy to do but you will need to wined the plungers back in to fit new pads.
hope this helps

Apr 29, 2012 | 2001 Peugeot 206 1.6

1 Answer

Peugeot 406 HDI GTX 2000 No Dip Headlights + Lack Of Power In Wet


Hi
Firstly these cars have a lot of issues with electrics, not bad but they dont like the wet.

1.If you have got either the air mass sensor or air mass meter Wet then they will not function correctly, you can somtimes clean these and they will work again.

2. The EGR Valve thats " Exhaust Gas Recycle'r" valve this re-uses the unburnt fuel and forces it back into the engine to burn again. modern cars depend on this with all the new emmissions laws, when these go you would be lucky to get 50mph and it would really struggle on hills, this fault can come and go, but normally you will get a yellow engine light, "although not always" again you may be able to clean this, worth a try.

3. the turbo could be at fault, but you can normally still drive the car fairly well. and it's quite obvious with a turbo when they go.

How much do you know about cars? if you know a little then checking these things is quite simple, let me know if you need more help.

Im fairly sure it is one of the above faults but really it is always better if I could see the car, hope this is helpful

Regards

Dan

p.s if you do go to hte garage mention the above parts!

Feb 04, 2010 | 1991 Peugeot 405

1 Answer

Peugeot 306 ABS light is on constantly.


if it help, having the abs light on in your vehicle just means that the abs system has a fault. normaly the abs sensor on one of the wheels are abd in 85% of all vehicles. if you are worried about driving the car, no worries, it is still safe to drive and you will NOT lose your brakes. your brakes are manual and the abs is electrical. i would say take your car to a dealership and have them rub a diagnostic test on your abs. they will be able to help you more then a regular garage will. most dont have the ability to check abs systems

Nov 28, 2009 | 2005 Peugeot 405

2 Answers

I have a warning light on dashboard of peugeot 406 hdi and


sounds like a fault on traction control or abs
check the abs rings on the front drive shafts

Nov 10, 2009 | 2005 Peugeot 405

3 Answers

ABS and brake fault warning


I has a clicking/knocking noise on one of my 407 (54 plate) front wheels after a change of brake pads. On investigation I found that the bracket to which the caliper hydraulic hose was fixed (at the lower end of the suspension strut) had been bent downward and was catching the CV boot clip. I bent it back up and the noise went. It is possible (if the brake caliper is not supported during pad change) to bend the bracket supporting the hydraulic hose. It could also interfere with the ABS wheel sensor bracket - check. Simply jack-up and support the car on the side with the noise and turn the wheel by hand to see what gives (don't go under the car until it is supported safely)..

Apr 27, 2009 | Peugeot Liberte Cars & Trucks

Not finding what you are looking for?
1991 Peugeot 405 Logo

Related Topics:

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

mike hayward

Level 2 Expert

279 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...