Question about 1999 Mitsubishi Montero Sport

1 Answer

I want to change belt on ac it it nessary to have to loosen tension pulley

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Yes, that's what lock's it in place to hold tension on belt, loosen nut on pulley, and turn other bolt and pulley will slide up or down to release tension on belt.

Posted on Jul 09, 2010

  • Alexander Mimun
    Alexander Mimun Jul 09, 2010

    Maybe this will help also.




×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing of ac belt


usually to change the serpentine belt all you will need to do is loosen the belt tensioner and take the belt off the pulleys. here is a video that might help you. the serpentine belt drives the ac.

Jul 24, 2015 | AC Cars & Trucks

2 Answers

How do I release the tension on the ac belt


your tensioner pulley is most likely spring loaded with a square slot and it made for a 3/8 inch drive ratchet set your ratchet to loosen stick it in the hole and give it a little crank it is spring loaded so you'll have to hold of their why you pulled the belt off but it will loosen the belt and should be really easy to slip off

Mar 30, 2015 | Hyundai Motor 2004 Sonata

1 Answer

Replace belt a/c


It may depend on engine litre size. 4 cylinder shows top pulley for ac belt, needs to be loosened. to release tension.

6 cylinder shows tensioner pulley on mounting bracket for compressor. Loosen the bolt for tensioner pulley to release tension.

Feb 23, 2015 | 1991 Mitsubishi Mighty Max

1 Answer

What do I loosen to get 1st belt off so I can change ac belt?


Assuming you're talking about the 22re ... there are tensioners on both the power steering (first) and the a/c belts. Loosen the bolt on the pulley and then the bolt on the side of the tensioner tightens and loosens the belt. You might want to check the inner ... alternator / water pump belt while you're there. No tensioner for this one, you need to loosen the bolt that the alternator pivots on, loosen the bolt on top of the alternator that holds it in place on that bracket and then pry alternator and tighten bolts to hold the tension.

Sep 05, 2010 | 1994 Toyota Pickup

1 Answer

How do i change the drive belt on a 97 Mirage


To change the drive belt you will need to find the tensioner pulley justt loosen the bolt /nut in the center of the pulley and then wind the pulley slider down usually located on the back side of the pulley. wind it down until you can slip the belt off. if the is 2 belt say for instance power steering and ac etc remove the outer belt first the power steering pump may have the tensioner on it same concept though. loosen nut/bolt and unwind til the belt slip off the pulley. remember to disconnect your battery because its better safe than sorry. Good luck!

Mar 08, 2010 | 1997 Mitsubishi Mirage

1 Answer

Change power steering belts


My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.

Click on the following direct Link. It has several Diagrams for your Belt depending on your engine size and options (AC/No AC etc.) AND whether you have Tensioners OR Locking/Adjusting Bolts/Nuts.
IF APPLICABLE: These point out the direction of rotation for the Tensioner in order to loosen and reinstall the Belt.

IF APPLICABLE: These also point out where the Locking and Adjusting Bolts/Nuts are, to loosen the belt and remove; and reinstall the Belt and .

Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.


Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/2003/make/mitsubishi/model/galant/2003_mitsubishi_galant_drive_belt_routing_diagram.htm

Dec 26, 2009 | 2003 Mitsubishi Galant

1 Answer

I have a 99 mitsubishi diamante and i broke the power steering belt how do i put it back on


Looking at the front of the engine you should see, from left to right, the PS pump, a tensioner pulley, and the crank pulley.

Loosen the 14mm fixing bolt and the 14mm fixing nut on the tensioner pulley.
On the bottom there is a 14mm adjuster bolt, loosen it to slide the pulley downward. It helps to have a swivel socket to access this bolt.
The belt goes around the outside of all 3 pulleys.

The alternator belt will need to be loosened to get the PS belt on behind it.
Between the Crankshaft pulley and the ac compressor pulley you will see another adjuster. Simply loosen the 14mm nut on the center of the pulley, then loosen the 14mm adjuster bolt sticking out the bottom to slacken the belt enough to slip it off.

Use the same adjusters to tension the belts once installed, and tighten down all fixing nuts/fixing bolts.

Be advised: If you broke your PS belt, you should verify your pump and tensioner pulley are in good shape and spin freely, and were not the cause of belt failure before putting on a new belt!

Sep 09, 2009 | 1999 Mitsubishi Diamante

1 Answer

How to change 1999 nussan quest ac belt


http://groups.yahoo.com/group/villagerquest/

Belt —A/C Removal
  1. Remove the A/C compressor drive belt.
    1. Loosen the A/C compressor drive belt pulley tensioner bolt.
    1. Loosen the A/C compressor drive belt idler pulley adjustment bolt.
40f6b66.gifInstallation
  1. sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Incorrect drive belt installation will cause drive belt failure.
    NOTE: Inspect the pulleys for warping or abnormal wear.
    NOTE: Make sure drive belt is properly installed on each pulley.
    To install, reverse the removal procedure.
    • Adjust the A/C compressor drive belt. For additional information, refer to Belt Adjustment—A/C .

Aug 10, 2009 | 1995 Nissan Quest

2 Answers

AC belt on 1999 Chrysler 300M


When you replace the AC belt you really should replace the serpentine belt as well, since you will have to take it off already. If you don't do it now it is inevitable that you will have to replace it in like 3 weeks anyway : )

You need to first remove the serpentine belt by loosening the nut in the center of the idler pulley. After that you will need to loosen the push bolt on the side of the idler pulley. The hub bolt is a 15mm size and the push bolt on the side of the tensioner is a 13mm I think. After you loosen it sufficiently, you will need to pull off the old belt.

Next you will need to loosen the tensioner pulley for the AC belt as well. It is the same process. The main issue is space. You will most likely need to raise your car to get at the right angles to loosen these pulleys.

Once you loosen the idler pulley in the same manner as you loosened the other, you can slip the AC belt onto the back of the crank pulley and route it as the diagram under your hood instructs you. Next tighten up the idler pully in the opposite way as you loosend it...tighten up the push bolt until the belt play is within factory specifications, then tighten the hub bolt in the center of the pulley. Do the same for the serpentine belt and you should be up and running in no time. I just performed these tasks on my 2000 300m and I wish someone would have told me this before I started my project. Hope this helps, Good Luck!

Mar 22, 2009 | 1999 Chrysler 300M

2 Answers

BELT TOO LOOSE ON 1990 FORD 5.0 BELT FOR AC & AIR PUMP.


the idle pulley is difficult to adjust on this one i will try to walk you through large bolt on front of pulley loosen about two turn the behind the bracket in which it is mounted there is a 15mm adjusting bolt tighten to tension loosen to loosen i say this because some are backwards lol tighten untill you push down on the belt and it deflects only about 1/4 in retighten the front

Jun 11, 2008 | 1990 Ford LTD Crown Victoria

Not finding what you are looking for?
1999 Mitsubishi Montero Sport Logo

Related Topics:

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...