Question about 2006 Chevrolet Trailblazer

1 Answer

Engine only cranks once in while not every time lot of drain on bat and the shifter nwont come out of park solenoid not working

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 339 Answers

{: ) You need to deal with the battery drain problem first, because many functions on the vehicle are affected when battery power is low. Need thorough inspections and isolation tests to determine the root cause of the drain. goodluck.

Posted on Jun 10, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 94buick park avenue can't shift out off parking level is locked


Are you talking about the trans shifter or the parking brake ?
If the shifter won't come out of park it could be the brake light switch or the shifter lock solenoid.
You may be able to shift out of park by turning the key to the unlock position but not to the on position, then crank the engine in neutral.

Mar 03, 2016 | Cars & Trucks

1 Answer

Gear shift will not move. I start engine, place foot on brake, then button on the side of shifter releases. But shifter will not budge. it stays in park.


Shift interlock solenoid not working and will not disengage parking lock, remove center console, locate shift solenoid, test it, if bad replace it. In the meantime you can use a zip lock tie to hold it in the disengaged position and your shifter should work.

Mar 11, 2015 | 2002 Chevrolet Cavalier

1 Answer

My 2003 Buick Regal wouldn't start on a very cold day. I came back the next day and decided to shift it out of park and back into park and it started right up. What could cause that to happen? 3800 engine


When you said "it wouldn't start" did it turn over (starter cranking the engine) or did it act like the battery was dead and wouldn't crank, even though all the dash lights lit up?

If it simply didn't crank over but then by you shifting it out of park, then back into park, may indicate a park/neutral switch problem.

It may have been something as simple as the shifter, when the vehicle was last parked, didn't fully engage the park/neutral switch into the park position. BUT by you moving the shifter out and back into park it engaged the switch.

Cold weather can do some strange things sometimes when it comes to mechanical devices. IF it acts up again, simply try the "trick" that worked the last time.

It may just be temperature related and may not give any more problems once the weather warms up.

Hope this helps.

Feb 23, 2015 | 2003 Buick Regal

1 Answer

How to get Audi '02 A6 Quattro from Park to Drive


Most times the brake pedal switch is bad. Other times the shifter solenoid is bad.

Feb 22, 2015 | 2002 Audi A6

1 Answer

Shifter stuck in park and engine cranks but won't start


check all wire connectors for water ingress and tight. check that the snow has not allowed mud to get any where to hinder correct operation

Nov 30, 2013 | 2006 Lincoln Mark LT

2 Answers

Audi transmission shift


Park is release by a small solenoid, the solenoid is powered up by the brake light circuit, so if the brake lights don't work due to a bad switch or wiring issue at the switch park will no release. If the brake lights do work then the wiring to the solenoid may be defective or the solenoid is sticking. Every car I have ever worked on has a bypass for the park lock, check your owner's manual for information on bypassing the lock out when this type of problem occurs.

Mar 20, 2017 | 1998 Audi A8

1 Answer

2001 buick lesabre, shifter wont move out of park, the car runs, brakes good but wont shift.


Check the BTIS(Brake Transmission Interlock Solenoid). This solenoid allows the shifter to be moved out of Park only when the brake is pressed.I did not like this idea(the first year it was introduced,we had to replace that solenoid on every Buick Skylark).We had so many on the lot that I decided to just carry the keys and my tools around the storage lot instead of binging them into the shop to save time.

Oct 07, 2012 | 2001 Buick LeSabre

2 Answers

Shifter is stuck in park. had to remove little cover over hole, by the shifter, to insert key into hole, to get shifter to remove shifter from park. what causes this and is it something i can fix on my...


I believe this vehicle is equipped with a shift lock that necessitates depressing the brake pedal before it can be shifted out of "Park". This is a safety feature designed into almost every car made nowadays to prevent unintended movement of the vehicle when shifting out of "Park". The Shift Lock solenoid is triggered by the brake light switch located near the top of the brake pedal arm. Starting with the "basics", check to see if the brake lights are working (they should illuminate when the brake pedal is pressed. If the brakes lights do not come on. then proceed to check the brake/stop light fuse. Replace if needed. Once the brake lights are functioning, the shift lock should "disengage" and allow you to shift out of "Park" when the brake pedal is pressed. If the fuses are okay, but still no brake lights, then the Brake Light Switch may need to be replaced.

Brake lights working but won't shift out of "Park"? Check for a separate fuse for the Shift Lock Solenoid. Replace if needed. Otherwise the Shift Lock Solenoid may need to be replaced. This will require disassembly of the console to access the part.

Apr 09, 2011 | Kia Optima Cars & Trucks

2 Answers

Will not crank with key but can get starter to hit by crossing it over but will not start


Lots of possibilities. Key switch, security system, solenoid (if that model has a separate solenoid) would top the list of likely suspects.

Dec 14, 2009 | 2004 Ford Explorer

1 Answer

Once in Drive, Jeep does not easily shift back to Park


Try to check the trans mission gears of your 1995 jeep grand cherokee.The shift fork and the clutch sleeve of the trans mission is locking to the other gears .And then also check the starter motor and its solenoid.if the starter motor solenoid is destroyed or worn out replace .

Jul 28, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Chevrolet Trailblazer Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...