Question about 1995 Chevrolet Lumina

Open Question

How is the best way to change motor mounts? 1995 chevy lumina with 3.1 with a/c.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

sledge1863
  • 149 Answers

SOURCE: 1995 lumina cranks but will not start

Sounds like it has jumped timing, dont know which engine you have so could be chain or belt.

Posted on Mar 23, 2009

  • 206 Answers

SOURCE: 3.1 lt engine for a '94 chevy lumina car. does the motor mounnt h

There should be 2 motor mounts at the front of the engine. Yes take them off this allows you to roll the motor forward and work on the back side.Leave the manifolds on the heads disconnect the crossover pipe between them and unhook the one exhaust pipe on the back side leading under the car. also if you go to Autozone.com and register no cost look up repair manual for your car it gives you a step by step for a head job torque specs and all

Posted on Apr 11, 2009

Molson02536
  • 3854 Answers

SOURCE: 1995 chevy Lumina, 3.1. Noisy blower motor on 3

Sorry friend, the noise is from a worn out bearing and there is nothing that we can do other then replace the blower motor. This would be a good time to replace it since when the weather turns cold the nois will get worst and then total blower failure. Easier to replace in the summer then witner in the cold. Good luck friend. 

Posted on Jul 03, 2009

  • 51 Answers

SOURCE: I HAVE 1995 CHEVY LUMINA CAR. MOTOR WONT TURN

Bad solenoid

Posted on Feb 01, 2010

Testimonial: "THANK YOU SO MUCH FOR GIVING US AN IDEA WHERE TO START LOOKING."

GMJunkie
  • 74 Answers

SOURCE: I have a 1995 Chevy Lumina with the ''Low Oil'' light on.

Faulty Oil Pressure Sending Unit,Faulty Oil Pump,Plugged Oil Pickup Screen!

Posted on Mar 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter for a 1995 chevy lumina mini van,where is it located in the engine


these are located at the front of the motor were the motor bolts to the transmission between the rad and the motor

Oct 26, 2011 | 1995 Chevrolet Lumina

1 Answer

I NEED TO REPLACE THE BOTTOM MOTOR MOUNTS ON MY 1991 CHEVY LUMINA. THERE SO MANY DIFFERENT PRICES! THE AUTO STORE S SAY $35.00 . . .THE DEALER SAYS $125.00!!


never ever buy from a dealer unless you want to pay top dollar for the parts. i would suggest buying online like from rock auto. They normally have the best prices.

Oct 29, 2010 | 1991 Chevrolet Lumina

1 Answer

Where can I go to find out to change the fuel pump in my chevy lumina 1995?


The best place to start is in a Haynes Repair manual or a Chilton's repair manual on your vehicle. These are available at your local auto parts stores.

Jul 22, 2010 | 1995 Chevrolet Lumina

1 Answer

Removal of oil pan for chevy lumina 1995


You must raise then engine high enough to remove the oil pan. Loosen motor mount bolts & remove them, jack engine up enough to remove pan or use a chain block. Use wood blocks to support engine at motor mounts. Good luck!

Apr 04, 2010 | 1995 Chevrolet Lumina

1 Answer

What is the best way to change a brake light switch? It's on a 1995 Chevy Lumina car.


1993-96 Vehicles
See Figure 2

0900c1528006832d.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 2: Brake light or stoplamp switch mounting-1995 vehicle shown

  1. Disconnect the negative battery cable. -96 vehicles, remove the driver's side instrument panel sound insulator panel.
  2. Detach the switch electrical connectors.
  3. Remove the switch from the brake pedal bracket.

To install:
  1. Position the switch to the brake pedal bracket.
  2. Attach the electrical connectors.
  3. If removed, install the driver's side instrument panel sound insulator panel.
  4. Connect the negative battery cable.

Nov 18, 2009 | 1995 Chevrolet Lumina

1 Answer

3.1l motor swap


if it is the same motor going in that came out ,it would fit and hook up but if you are changing from one size to another, you will have to change the wiring harness, hope this helps you, thanks robert b.

Jun 27, 2009 | 1995 Chevrolet Beretta

4 Answers

Too much oil in motor, how do i drain the excess oil out of the motor? I have a 1995 chevy lumina 3.1


yourgoing to have to drain it from the pan just pull the drain plug and let it all drain. change the filter and then replace with 5 quarts of 10w30 oil perferably quakerstate or valvoline brand

May 16, 2009 | 1995 Chevrolet Lumina

3 Answers

1995 lumina cranks but will not start


Does it have the anti-theft system, if so check for the two wires that go to the ignition switch and make sure they are not broken. If they are they will need to be fixed in order to get it too run again

Mar 23, 2009 | 1995 Chevrolet Lumina

1 Answer

Changing spark plugs 95 chevy lumina van


you will have to take off the coil packs and move them out of the way. then go in from the top. its kinda tight but just move whatever else is in the way

Jan 09, 2009 | 1995 Chevrolet Lumina

Not finding what you are looking for?
1995 Chevrolet Lumina Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...