Question about 1999 Plymouth Voyager

2 Answers

My digital speed odometer and gas gauge are no longer visible on my dash board. I went to Auto Zone and had them assist me in checking the fuses with no luck.

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,826 Answers

The fluorescent display is probably getting old and not functioning properly.

Have the same problem in a 1999 Ford Expedition that has the odometer flickering on and then flickering off sometimes.

Posted on Jul 09, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Hi. Check to be sure that the dimmer switch for these bulbs is turned all the way on. If still dark, the bulb may well be blown. If that is the case, call your nearest autoelectric repair shop and they will get you up and running in no time. J.

Posted on Jul 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Odometer, tachometer, speedometer, and gas gauge suddenly stopped working.


Sounds like the body control module has gone bad. It has a relay that caries considerable current to all of these accesories and wears out.
It can also be a solder joint on the circuit board where this relay mounts.
Hope this helps, Robert

May 16, 2012 | 1995 Buick Regal

1 Answer

1999 GMC Seirra fuel gauge and speed odometer stopped working


Yes, trace the wires fromt he high beam indicator light to ground.

Check for shorts in the wiring harness. This requires undoing the conduit, though which maybe should be left to an auto electric technician..

Also, if there is a short, it can be detected using an inductive ammeter around the positive or negative wire leading to the battery.

If it is above 0.2A then the system has a short somewhere.

Jul 11, 2010 | 1999 GMC Sierra

1 Answer

Dash board gauges not working on voyager 2000


You need to check your main fuses under the hood first and then check them under the driver side dash board.

Jan 25, 2010 | 2000 Plymouth Voyager

2 Answers

Everthing on my dash (speedometer,odometer,fuel


Blown Fuse or fried Circuit board. Take to a local AutoZone, Advance, Murray's, O'reillys or a similar part house for them to check the wiring. I'm assuming the van does not use a mechanical Speedometer or Fuel Gauge.

On the plus side, with no speedometer, your indicated odometer mileage does not increase. Just keep your speed down and your tank full. Kidding, just kidding.

Jan 05, 2010 | 1992 Dodge Caravan

2 Answers

Every Gauge quit working


check the ipc bfc acc fuse make sure fuses are not loose.

Apr 21, 2009 | 1999 Oldsmobile Alero

1 Answer

1999 Oldsmobile Alero Gauge problem


Could be lose connection on the back of the instrument cluster ,which means you would need to pull it out of the vehicle . Check pin fit to instrument cluster . for the B+ voltage suppy an ground connection's .
You said autozone - Tried to have auto zone diagnose from inside the car, came up with no codes. That's in the PCM - engine computer . There scan tool will not communicate with the instrument cluster ,which is also a computer in it's self. Need a factory scan tool to check instrument cluster.
Speedometer and/or Odometer Inaccurate
Step
Action
Value(s)
Yes
No
Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, inspect the fuse(s) for an open.
1
Did you perform the Instrument Cluster System Check?
--
Go to Step 2
Go to Instrument Cluster System Check
2
Turn the ignition switch to the ON position.
With the scan tool select Instrument Panel Cluster, Special Functions, Instrument Panel Cluster (IPC) gauges.
Perform the Speed Gauge Sweep Test.
Does the speedometer complete a full sweep when commanded?
--
Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls
Go to Step 3
3
Replace the instrument cluster. Refer to Instrument Cluster Replacement .
Did you complete the repair?
--
Go to Instrument Cluster System Check
--
With a scan tool select the instrument panel cluster, data display, gear status.
Monitor the gear range status.
Move the gear lever through each gear.
Does the scan tool display the correct gear selected?
Your best bet , take it to a qualified repair shop .

Feb 27, 2017 | 2001 Oldsmobile Alero

2 Answers

1998 Contour Speedometer, gas gage, odometer not working


check the relay for the dash gauges.

Robert

Sep 22, 2008 | 1999 Ford Contour

Not finding what you are looking for?
1999 Plymouth Voyager Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...