Question about Cars & Trucks

1 Answer

Where is the oil pump located in A 1993 ford thunderbird V6?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Inside the oil pan for the 2.3 and 5.0

Where is the oil pump located in A 1993 ford - 8aef209.gif

  1. Disconnect the negative battery cable.
  2. Remove the oil pan.
  3. Remove the oil pump inlet tube and screen assembly.
  4. Unfasten the oil pump attaching bolts, then remove the oil pump gasket and the intermediate shaft.
To install:
  1. Prime the oil pump by filling the inlet and outlet ports with engine oil and rotating the shaft of pump to distribute it.
  2. Position the intermediate driveshaft into the distributor socket.
  3. Place a new gasket on the pump body and insert the intermediate driveshaft into the pump body.
  4. Install the pump and intermediate shaft as an assembly.


WARNING Do not force the pump if it does not seat readily. The driveshaft may be misaligned with the distributor shaft. To align, rotate the intermediate driveshaft into a new position.
  1. Install and tighten the oil pump attaching screws to:

    2.3L Engine: 12-15 ft. lbs. (16-20 Nm) 5.0L Engine: 22-32 ft. lbs. (30-43 Nm)
  2. Install the oil pan.
  3. Connect the negative battery cable, then start the engine and check for leaks.



On the 3.8...

The oil pump is mounted in the front cover assembly. Oil pan removal is necessary for pick-up tube/screen replacement or service.

fcfa1f9.gif

  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Drain the engine oil, then remove the oil filter.
  4. If necessary, remove the oil cooler.
  5. Unfasten the oil pump-to-front cover retaining bolts, then remove the pump from the front cover.
  6. Lift the two pump gears from their mounting pocket in the front cover.
  7. Clean all gasket mounting surfaces.
  8. Inspect the mounting pocket for wear. If excessive wear is present, complete timing cover assembly replacement is necessary.
  9. Inspect the cover/filter mounting gasket-to-timing cover surface for flatness. Place a straightedge across the flat and check the clearance with a feeler gauge. If the measured clearance exceeds 0.004 in. (0.10mm), replace the cover/filter mount. Replace the pump gears if wear is excessive.
To install:
  1. Lightly pack the gear pocket with petroleum jelly or coat all gear surfaces with Oil Conditioner D9AZ-19579-CA or equivalent, then install the the pump gears in the cover pocket. Make sure the petroleum jelly fills all voids between the gears and pockets.


WARNING Failure to properly coat the oil pump gears may result in failure of the pump to prime when the engine is started.
  1. Position the pump body O-ring seal and install the pump body to the front cover using alignment dowels on the front cover.
  2. Tighten the pump retaining bolts as follows
    1. For vehicles through 1993, tighten the M8 bolts to 18-22 ft. lbs. (25-30 Nm) and the M10 bolts to 30-40 ft. lbs. (40-55 Nm).
    2. For 1994-96 vehicles, tighten the four smaller bolts to 15-22 ft. lbs. (20-30 Nm) and the two larger retaining bolts to 6-11 ft. lbs. (8-15 Nm).

  3. If removed, install the engine oil cooler. Install the oil filter.
  4. Carefully lower the vehicle, then refill the engine crankcase with the correct type and amount of engine oil.
  5. Connect the negative battery cable, then start the engine and check for leaks.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.


Posted on Jul 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 ford thunderbird computer location


Here's a pic of the PCM location...

d9a68fb.jpg



If you find this solution to be helpful, then please take a moment to rate this post. - Thanks.

Jun 21, 2010 | 1993 Ford Thunderbird

1 Answer

Location of oil pump on a 3.8 liter ford


It should be inside the oil pan. You will need to somehow get the oil
pan offf, in order to remove the oil pump. Make sure you check the
oil pressure to make sure that is the problem, before you go through
all that trouble getting to it?Good luck.

Mar 29, 2010 | 1985 Ford Thunderbird

2 Answers

Speedometer works fine but no odometer or trip



You need to replace the VSS or vehicle speed sensor. Located on LH, lefthand rear of transmission.

Sheilah

Feb 11, 2010 | 1993 Ford Thunderbird

2 Answers

1988 ford thunderbird (not se) 3.8L v6 vapor lock


check the vapor return line at the tank there is a valve that gets clogged with dirt causes tank to run excessive vacuum ..

Aug 25, 2009 | 1988 Ford Thunderbird

2 Answers

Turns signals do not work on 1992 Ford Thunderbird


I Have A 92 Thunderbird To And Its Located Above The Fuse Panel You Will Probally Need To Remove The Panel Under The Steering Column To Get To It Its Located To The Right of The Steering Column It looks Like A Relay Not The Normal Looking Round Style Flasher

Jul 10, 2009 | 1992 Ford Thunderbird

1 Answer

What keeps killing fuel relay sensor in 1993 ford thunderbird


the fuel pump drawing to much amperage. It's starting to go.

Jun 07, 2009 | 1989 Ford Thunderbird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...