Question about 1988 Acura Legend

1 Answer

My S3 light on my dash keeps blinking when i drive whats that mean?

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

According to the owner's manual, it suggests having the tranny checked out. When mine started flashing @ 25,000 miles ago I had my transmission checked out. As my ECU does not show codes any longer, I was told that it was most likely a sensor had gone bad, and unless the car started driving poorly, not to worry about it. Apparently that transmission has 5 sensors on it.Like I said....25,000 miles ago. If your ECU still codes properly, an honest transmission guy should be able to isolate the source.

Posted on Sep 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car is flashin and S3 light and Idk what that means


When the S3 (Transmission) is blinking on the dash, you need to stop trying to start your car and give it a few minutes to chill out. Then turn your key to "on" but without actually starting your car. Put your foot on the break and begin to move your shift up and down slowly. This will insure that you do not have a stick between the engine and the transmission. With the car "on" but not started, continue to move the shifter up and down a few more times. Put it in neutral, with your foot still on the break, and start the engine. This will not work permanently, but will get you from A to B for a little longer. Its most likely the transmission switch failing.

Jan 16, 2011 | 1989 Acura Legend

1 Answer

S3 light starts blinking after driving around for a little while. I also notice the speedometer will stop working and then starts back working. When I turn off the ignition this clear the blinking S3...


The transmission's electronic control module is most likely bad I had a 1989 prelude that had the same issue I had to replace the TCM on it after the S3 light came on but my problem was a problem shifting, if you have a electronic speed sensor for the trans. and not a speedometer cable the speed sensor may be bad if you have the cable type change the TCM (transmission control module)

Jan 13, 2010 | 1991 Honda Prelude

1 Answer

1985 Chevy S10 Indicator light on dash keeps blinking


HAVE YOU CHECKED TO SEE IF IT AINT IN 4WHEEL DRIVE MODE ...OR TRANSMISSION MIGHT NEED SERVICE?

Jul 24, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

92 acura integra s3 dash light constantly blinking


that shop should be responsible. but you can reset by taking negative battery wire off for few minutes. u can also get a book for that car cheap and read through. make sure no other wires disconnected

Apr 24, 2009 | 1999 Acura Integra

1 Answer

98 Camaro Headlights wont work


Dash lights were falsing ? I assume you mean pulsing .
driving lights come on ? daytime running lights or park lamps ,does the vehicle have daytime running lamps . Daytime running lamps module .
Daytime Running Lamps (DRL) Module (Headlamp Auto Control Module)
Mounted behind the radio and the HVAC control, left of the instrument panel compartment.

Jun 17, 2017 | 1998 Chevrolet Camaro

2 Answers

Blinking yellow engine light on dash


it means there is a failure going on and it could cause other damage if keep driving. it is usually a misfire code with a dead cylinder.and all the raw fuel that gets dumped into convertor due to it not firing will cause catylitic convertor damage.

Dec 23, 2008 | 2004 Chevrolet Silverado 1500 Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...