Question about 2000 Hyundai Accent

1 Answer

Motor rotates but will not start. getting fire to plugs and is getting gas to the enjectors. i know that so car the map sensor goes bad the car will not start, and also on some models O sensors will not let the car start. this car is a 1999 hyundai accent 3x 1.5L. have any ideas?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 524 Answers

check the gear mechanism which connects the engine with the motos. this may be because the spped of the engine is not sufficient to start the engine even though u get the gad in the injectors. so try this.

Posted on Jul 09, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2000 Silverado is running bad it started loosing power backfiring so I replaced roster button cap plugs wires didn't back fire but still run bad so I replaced gas filter still run bad

Have it tested with a scan tool ,check engine sensor data parameters ! Possible dirty or bad mass air flow sensor ,O2sensor ,Coolant temp sensor, map sensor etc... Check for vacuum leaks , Plugged fuel injectors , dirty throttle plate , also check fuel pressure . Is your check engine light lit ?

Dec 27, 2015 | Cars & Trucks

1 Answer

Why does gas cap light come on?

You need to check the seal on gas cap. If its bad then get a new cap or replace seal. Gas cap may also have a hairline crack. Lasty rotate cap back n forth to reset seal as a starter. Simple fix

Aug 18, 2015 | Ford Expedition Cars & Trucks

2 Answers

1993 sonoma pickup act's like it's not getting gas...we replaced the enjectores

Turn key off and on 3times w out startn. On4th try startn it. If goes then fuel pump etc is bad. May also hav ignition problem like bad dist cap or wires. Getta repair manual

Apr 16, 2015 | GMC Sonoma Cars & Trucks

1 Answer

Blinking Check Engine Light / Rough Idle

Double check the spark plug wire firing order. The cylinder have to have voltage in a certain order. If you do not have a motor manual you can google for this information. just write for example: 2002 ford taurus 6 cylinder spark plug firing order. The firing order goes in sequence usually in a clockwise direction. For example: 1, 5, 3 ,6 2, 4 in a clockwise order. spark plug #1 wire goes to the coil then spark plug #5 wire goes on the coil in a clockwise rotation, next to where spark plug # 1 was connected. This would mean that spark plug number 1 will fire (or get voltage), then spark plug nuimber 5 will fire (get voltage), then spark plug number 3 and so on. The sequence will continue to happen over and over again as long as the car is on. Here's another tip! When it nice and dark outside, turn your car on with the hood open and look at your spark plug wires for any voltage jumping from the wires to the motor metal. Keep in mind you may have to tent yourself with a cardboard to see the voltage arcing to metal. It has too be super dark for you too see this fault. Any arcing will cause your engine to misfire and your engine light to come on. Hope this gives you a starting point to finding the problem. Good Luck.

Mar 07, 2014 | 1996 Pontiac Sunfire

3 Answers

I have a 1994 Dodge Stealth 3.0 DOHC Non Turbo. It won't start. It only gets fire on one coil. All teh coils are good fule pump works, New crank sensor, New spark plugs and wires, motor been port and...

look did u replace the censor where harmonic balancer is an the an the crank censor they are both like magnitos theres a metal fan blade looking thing that rotates through it make sure its not damaged an locked down let me know my email is

Mar 15, 2011 | 1994 Dodge Stealth

1 Answer

Why does the car do bad on gas?

Several things that cause poor gas milege! Bad thermostat,temperature sensor,MAP SENSER,OXYGEN SENSOR ,MASS FLOW AIR SENSOR,PLUGGED CONVERTER,FAULTY COMPUTER,CHECK IGNITION TIMING.

Sep 09, 2010 | 1996 Chevrolet Monte Carlo

2 Answers

Motor turns over but will not start, seems to be getting gas, & spark

I don't have enough info to give you a specific answer so I've listed a bunch of possible problem that could cause your engine to roll over but not start.
Check the battery and connections, a weak battery or bad connections can cause a weak spark and stop the engine from firing.
Fuel pump or fuel filter, low gas pressure can cause to lean of a air/fuel mixture for the engine to start.
Bad gas, old gas or water in the gas can stop the engine from firing.
Bad or fouled spark plugs, could be caused by bad gas.
Ignition wiring problems, can cause weak or unreliable spark.
Bad, poorly connected or misconnected spark plug wires. Even 2 wire out of order can stop the engine from firing.
Oily spark plug wires, can cause the spark to fire at the wrong cylinder or misfire.
Worn, damaged or wet ignition components.

Jun 08, 2010 | 1996 Jeep Grand Cherokee

3 Answers

We have a 1991 gmc jimmy we want to know what would cause the fuel enjectors to not fire on cold start. but we prime the motor with a little gas the motor will start and the injector will start spraying...

It sounds like an air lock or a fuel pump issue. firstly get the filter changed and bled through this might help. if the problem persists check the pump.



Jan 31, 2010 | 1991 GMC S-15 Jimmy

1 Answer

88 s10 with a 2.5l inline. engine will not idle properly. starts ok, races up a bit, and begins a severe lope. I have done a complete tune up with oem parts, fuel pump, map sensor, and an iac motor. this...

I am currently having the same problem, have you checked the injector? those the enjector on those engines were known for the injector dribbling too much fuel because of the o ring going bad. also there are several different vaccume lines that could be damaged or collapsed.

Jan 11, 2010 | 1988 Chevrolet S-10

2 Answers

Bad acceleration - engine goes off while driving

12 is battery disconnected lately, or dead. No worries.
13 & 14 are your likely problem, M.A.P. sensor.
52 is oxygen sensor.
I would replace M.A.P sensor, disconnect battery for a few minutes to erase codes, then hook-up start & run the vehicle for a while. My guess is that the oxygen sensor is being tripped by Map sensor. Run for a couple of days if running o.k. then check codes again.

Mar 28, 2009 | 1996 Plymouth Voyager

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

80637 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides