Question about 2002 Dodge Durango

3 Answers

Obd2 check tricks 2001 dodge durango

Obd2 check tricks I just bougtht a 2001 durango and the check engine light has already gone on. i have worked on other vehicles where you just have to bend a paperclip and it will blink out trouble codes. any luck with this one?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On-off with ignition 3 times and you will get error code in odometer. Check the code from the internet gods, it will tell you. Probably small evaporation leak detected from loose gascap. Try removing ground from battery for 10 min,then replace. It should go away. If comes back, something more serious perhaps.

Posted on Jul 14, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

With most durangos and older rams, not having the gas cap tightened just right can cause the engine light to come on. Try screwing the gas cap on tighter, start and kill engine a couple times and see if your light goes off!

Posted on Sep 06, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

No, The paper clip trick won't work on this one. You need a scanner. Autozone will read the codes for free.

Posted on Jul 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check engine light on, abs light on, brake light on


it means your car has the obd2 trouble code, check it out first.

Aug 10, 2011 | 1999 Dodge Durango

1 Answer

My brake lights are not working on my dodge durango 5.9 liter 360 hp 2001 ive changed the fuse for the hazard lights, they are working fine now and ive changed the bulbs. the switch under the brake pedal...


Hello and welcome to FixYa!

Try to check the ground of the tail lights. It can be disconnected or worn out. It's a black colored wire that needs to be attached on the car's body. This can do the trick.

Hope this helps and thank you for using FixYa! Have a good one!

May 03, 2011 | 2001 Dodge Durango

1 Answer

Why doesn't the engine light go off on my 2001 dodge durango


Which engine light are you referring to? If you are talking about the Check Engine light then it is on because there is a problem with the emissions system. It can be as minor as a loose gas cap or more severe. You need to have the ECU scanned with an OBD2 scan tool. The tool will retrieve the code stored by the ECU. This will tell the technician what part is being effected but not necessarily the defective part. It takes skill and training to determine what the problem is. I suggest you seek out a qualified mechanic with the tools and training and do not just throw parts at the problem.

Apr 21, 2010 | 2001 Dodge Durango

2 Answers

2001 durango brake lights dont work ,already replaced brake switch


More than one possibility. Could be bad bulbs, damaged wires, bad turn signal switch (yes, the brake lights work through the turn signal switch) - has the vehicle been worked on recently?

Jan 15, 2010 | 1999 Dodge Durango

1 Answer

Durango 2001 R/T check engine light on... Been to several


there are 2 short hoses under the vehicle below drivers seat...see if they are cracked or broken.....

Jul 11, 2009 | 2001 Dodge Durango

1 Answer

Engine lights on


check the oil level if oil is good you have whats called valve noise on inside of engine switch to a heavier weight oil and the noise will get lower but get the light checked

Jun 30, 2009 | 2001 Dodge Durango

2 Answers

My check engine light is on. The code is P0121


I believe all the Mopar OBDC codes are the same. A list of the 2001 codes were posted on a PT Cruiser site here: 2001 Chrysler codes

Your error says the throttle position sensor and MAP sensor disagree with each other

Jun 22, 2009 | 2001 Dodge Durango

1 Answer

Hoe do I reset the security light on a 2000 Dodge Durango


THE CHECK ENGINE LIGHT COMES ON DUE TO A CODE THAT WAS THROWN, JUST RESETTING THE LIGHT DOESN'T DO ANYTHING CAUSE THE CODE STILL REMAINS THERE, YOU WOULD NEED AN OBD2 READER TO SEE WHAT THE CODE IS THAT IS COMING UP AND TO RESET IT. IF YOU DONT FIX WHAT IS THROWING THE CODE THE LIGHT WILL NEVER GO OUT.

Jan 18, 2009 | 2000 Dodge Durango

Not finding what you are looking for?
2002 Dodge Durango Logo

536 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...