Question about 1996 Isuzu Rodeo

1 Answer

I need directions on how to put transmission fluid in it. My step dad has just been putting it in the pan and hoping that some makes it in there

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I need to know what make model and year of production of your vehicle and size engine please, and what type of transmission fluid it takes. thank you.

Posted on Jul 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When replacing the shift solenoid, does the transmission fluids need to be drained to do this?


Yes drain fluid remove transmission pan remove valve body be careful and make sure u install bolts in proper order also u need to replace the harness in the transmission. Need step by step directions let me know .

Feb 25, 2013 | 2001 Hyundai Elantra

1 Answer

I need to change transmission filter and fluid on my 2004 chevy impala and being single and all and female I'm not up to car care that great. Where is the trans filter located. Trying to do my s


The transmission filter is under the car under the transmission fluid pan. you have to lift up your car loosen the volts, take of the pan, take of the filter put in the new one, put the new one on, put the transmission fluid pan in place, put the bolts and tighten them, lower the car and put however much transmission fluid your car takes. Hope the best of luck for ya.

Mar 03, 2012 | Cars & Trucks

2 Answers

Need to know how to change the transmission fluid and filter


Hi,

Please follow the detailed steps provided below carefully;

STEP 1 Jack up the front of the car and put jack stands under it for your safety or use car ramps.


STEP 2 Lay down under the car looking at the transmission pan,you should see about 12-17 bolts,these bolts should be 10mm in diameter.

STEP 3 Have a drain pan that will hold a gallon or two of fluid ready,taking out the back bolts put the drain pan under the tranmission pan and start loosening the bolts along both sides,the fluid should start leaking out.


STEP 4. You can control how fast the fluid comes out by loosening the remainder bolts.when the fluid is just a drip push up on the transmission pan and remove the rest of the bolts.


STEP 5. Carefully lower the transmission pan and empty the remaining fluid into the pan,clean out the transmission pan and scrape off any of the fluid in the old gasket.

STEP 6 Ensure to replace the transmission filter and the gasket.







Have a nice day..

Aug 19, 2010 | 2002 Pontiac Grand Am

2 Answers

How do i change the transmission fluid and filter in a 2001 pontiac grand am v6 automatic


You need to open the oil pan under neath the transmission, once done you can see the oil filter and dismantle it very easily. Good luck

Feb 13, 2010 | 2001 Pontiac Grand Am SE

2 Answers

How do I change transmission fluid and its filter. Thanks.


Put a car jack with a chunk of wood on top
(so you don't bend it), under the pan, rase it up to support the weight of the pan (as it's full of fluid)
remove the bolts from the transmission pan.
lower your jack.
most filters either snap in place or have a bracket that mounts the filter with screws. Reverse directions to put back on. Be mindful about the seal on the top edge of the pan. Most kits come with a gasket, but the surface must be cleaned and prepared either way. Please remember the full pan is HEAVY, and liquid shifts easily.

Jan 05, 2010 | 1996 Toyota RAV4

2 Answers

How do i change the transmission fluid for a 1999 ford 250 econoline


First remove the transmission oil pan remove the bolts that hold it on, next remove the filter and remove the gasket. Use 3M weather stripping glue to glue new gasket to the pan, (N0t the Transmission) remove the screw holding the filter on and remove it, if it’s plugged you will get fluid on you so have a piece of cardboard under you to catch as much as you can. Replace filter be sure to install new o ring and put a slight amount of fluid on the o ring to get it to slide back in place and seal replace bolt holding the screen back on. Reinstall pan bolts tightening from left to right just get the bolts snug then tork them from left to right and front to rear working from the center going out to the ends. Once it's tight add 5 quarts of transmission fluid to the filler tube, now disconnect the transmission cooler line from the radiator and put a big pan under the connections, start the car and et it run for a couple of minutes shut off and check oil level add more fluid and do the same, if the fluid won't come out wile running put brake on and put in gear, it will pump out a quart every thirty seconds so run for anther minute and a half, once the fluid is read and the transmission is low enough to add more then retook line to radiator, add one quart of Lucas trans mission oil conditioner then top off with fluid to the full make with car running and level in park. Top off to full make. You should notice a big difference if smooth shifting and better performance and fuel mileage. Use Dexron III transmission fluid. Please rate, as this is all I ask for free information. Buying a book would cost you $24.00 so when you rate that’s your thanks to me for my time. If you need more assistance post here and I will help you more if I can.

Aug 08, 2009 | 1999 Ford Econoline

3 Answers

How to change trans. fluid and filter in a 2000 mitsu. mirage 1.8?


first you need to get a pair of safety glasses to protect eyes from cleaner. then you need 12.6 pts or 6.5 to 7 quarts of transmission fluid+ filter.you also need a drain pan to catch transmission fluid.you need a 3/8 ratchette and socket set.you need some paper towel and maybe1 or 2 cans of brake cleaner.now you want to safely raise and support car on jack stands.make sure you are on solid level ground.put drain pan under transmission to catch fluid.take ratchette wrench start removing tranny pan front and side bolts.loosen rear bolts one turn let the pan drain.when all tranny fluid drain out of pan. then remove pan clean it good with brake cleaner.remove all traces of old gasket. from pan then dry with paper towel..then you remove tranny filter.becareful not to damage anythingthen put in your new tranny filter then.wipe and carefully clean around gasket area on transmission with paper towel.make sure there is no traces of olds gasket material on tranny area where tranny pan gasket seals.now get new gasket align its with tranny pan holes.you might want to buy a gasket adhesive.just put on some to hold gasket in place when you install it to transmission.besure to clean all tranny pan bolts real good with brake cleaner. then dry them off real good.because some transmission you have to put a little rtv sealant on bolts.to keep them from leaking.now once you get bolt holesand gasket on transmission pan line up.all tranny pans bolts with a little rtv silicone on threads and on bolts head where they meet the pan.then you transmission pan in place.make sure gasket and bolt holes line up.when putting bolts in dont tighten them until you get them all in first.when all bolts are in.then you tighten criss cross dont over tighten them. torque them to 90 inch pounds .when all is done .starting putting tranny fluid in.and check for leaks.start the engine up let it idle for few minutes if you see no leaks lower car down to ground.then move transmission gear selector through each range and back to park.make sure tranny fluid level correct before driving car. WARNING IF YOUR CAR DONT HAVE THE TRANSMISSION DIP STICK.AND HAVE A FILL CAP INSTEAD THE DEALERSHIP HAS TO CHANGE FLUID.BECAUSE THEY HAVE TO RAISE CAR ON LIFT TO CHECK FLUID LEVEL.BECAUSE CAR HAS TO BE RAISE UP LEVEL THEN A DRIP PLUG IS MOVED TO CHECK TRANNY FLUID LEVEL.

Jul 19, 2009 | 2000 Mitsubishi Mirage

1 Answer

00' Kia Sephia LS not shifting past 1st gear


first you need to buy transmission fluid new filter and new gasket.you need 11.4 pints of transmision fluid.raise front of vechicle.set parking brake.block both back wheels.besure support vechicle weight with jack stands. get a drain pan.if your transmission pan dont have a drain plug.loosen rear pan bolts a few turns.remove the front and side transmission pan bolts. let fluid drain.remove tranny pan. then clean old gasket material from transmission and pan carefully.dont scratch or damage surface.clean old tranny bolts using brake cleaner or buy new tranny bolts.you have to put a tiny film of rtv silicone on tranny bolts so they wont leak.carefully remove old tranny filter and put on new filter.clean all grease grim away from tranny pan it should be **** and span because.you might need a little gasket adhesive to hold gasket in place while putting pan back on transmission.to line up bolt holes.loosely put all bolts in you have to move pan a little to get holes line up.when all is finish put tranny fluid back in.besure you put 11.4 pints back in that about 6.5 quarts. make sure tranny fluid level is right before driving vechicle.l

Jun 19, 2009 | 2000 Kia Sephia

1 Answer

I would like to change the transmision fluid in my 1996 s-10 pickup 4.3 eng any advice???


Unfortunately GM didn't put a drain plug in the transmission pans. You'll need a transmission service kit which will have the filter and new pan gasket. Put a large catch can under the pan, loosen all the bolts and crack the pan loose from the transmission and allow the fluid to leak out. Next remove all but two bolts letting the fluid drain as you go. With one hand on the bottom of the pan supporting it remove the last two bolts. Lower the pan down and drain the rest of the fluid out. The rest is pretty simple and hopefully less messy. Wiggle the transmission filter out, remove the grommet and replace it with the one supplied in the kit. Clean the pan, especially the magnet of metal shavings. Clean the gasket surfaces. Place the new gasket on the pan and thread a bolt in each corner into the gasket. Bolt the pan up and refill with transmission fluid.

Apr 05, 2009 | 1996 Chevrolet S-10 Pickup

1 Answer

Mamad needs to know how to check transmission fluid in a 1999 pontiac grand am se and how to change it.


I assume you mean an automatic transmission. The dipstick should be to the right rear of the engine compartment (facing the car). There should be directions on how to check the fluid level stamped on the dipstick. To change the filter and fluid, you need a large drain pan and a pair of ramps. Start loosening the drain pan bolts, loosening more on the lower side of the pan. As the gasket starts to come loose the fluid should start poring out. Once you have the pan off, examine the pan and look for large bits of metal or chunks of clutch in the bottom of the pan (sooty looking deposits are normal), clean the pan, clean off the gasket surface, install the new filter, put the new gasket on the pan and start inserting the bolts through the pan lip and gasket. Put the pan back in place and start all of the bolts. Tighten all until they are finger tight, make sure the gasket has not shifted, then start tightening with a wrench. Fill the transmission with the recommended fluid (probably Dexron III or Mercon) and check the level. Do not overfill as the transmission will not shift properly.

Mar 06, 2009 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
1996 Isuzu Rodeo Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...