Question about 1999 Dodge Intrepid

1 Answer

Replace shift lever and now gears are stuck I removed the shifting lever and still stuck, what did I do wrong? please help!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 435 Answers

I do not know the particular details of Intrepids, but in most modern automatic vehicles there is an electric lockout gate that will not let you pull the lever out of park UNLESS you are stepping on the brake, or in some cars, unless it is turned on. There is a good possibility that you forgot to reattach the cable that powers this gate, in the bottom of the shifter assembly, when you reassembled the shifter lever.

Posted on Jul 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake shift interlock solenoid


column or floor shifter ?
Brake Shift Interlock Actuator - Floor Shift Removal and Installation
NOTE: The brake shift interlock actuator is not serviced individually. If replacement is required, install a new floor shift selector lever assembly.
For additional information, refer to Selector Lever - Floor Shift in this section.
Brake Shift Interlock Actuator - Column Shift Removal and Installation
  1. Set the parking brake.
  1. Remove the steering column shrouds.
  1. Turn the ignition to the accessory position and apply the brake or actuate the brake shift interlock actuator (BSIA) override.
  1. Put the selector lever into the NEUTRAL position.
  1. Disconnect the BSIA electrical connector.
  1. Remove the BSIA screw.
  1. Gently pry the clip up and remove the BSIA.
  1. NOTE: During installation, verify that the BSIA override has been activated and the slider is fully rearward. Before rotating the selector lever from NEUTRAL into PARK, align the selector lever tab into the BSIA. To install, reverse the removal procedure.

May 26, 2017 | Ford Expedition Cars & Trucks

1 Answer

Gear shift lever 1992 ford areostar


remove the gear shift cover and release the lock switch

Jan 20, 2013 | Cars & Trucks

1 Answer

Hi, I own a 1999 Chevy Blazer. The guy I bought it from said it has ****** problems. When I shift it through the gears it clicks like it is going into gear. I can drive it down the road but I cannot d


Check your shift cable it may be stretched or broken.Located on drivers side of tranamission.Have someone else shift thru the gears while someone looks at the shift lever on the side of the transmission to see if it shifts into and out of all of the gears.If it shifts in and out of all the gears then the cable is good and you have a internal problem.If it does'nt shift in and out of all gears then replace the shift cable.

Dec 04, 2011 | Cars & Trucks

1 Answer

88 ford f150 gear shift lock


A common cause when the gear is on the steering column is a worn out pin. That pin holds the lever to the shift assembly. Try removing the gear shift lever and examine it.
  • If the bushing between the pin and the shift is worn out, replace it.
  • Examine the tip of the the gearshift and replace the shift if it's worn out.
Hope I've helped. If not please feel free to contact me with more details.

Nov 20, 2011 | Nissan Cars & Trucks

1 Answer

Currently my 1999 SL1 Saturn will not change gear, and I mean that the shift stick doesn't register there being any gears at all. It's stuck in third gear when it broke and now I'm trying to...


YOU NEED A HAYNES REPAIR MANUAL IT CAN HELP YOU, YOU HAVE TO REMOVE CONSOLE, PUT SHIFT LEVER IN SECOND GEAR AND DISCONNECT THE CABLE END FROM THE LEVER.DEPRESS THE TWO TABS ON THE CABLE HOUSING USING PAIR PLIERS REMOVE THE CABLE FROM THE SHIFTER.YOU HAVE TO MOVE CARPET UNDER DASH AWAY FROM SHIFT CABLE,YOU HAVE TO GO UNDER HOOD REMOVE AIR INTAKE DUCT ASSEMBLY DISCONNECT THE CABLE END FROM THE SHIFT LEVER ON THE TRANSAXLE YOU HAVE TO DEPRESS THE TWO SHIFT CABLE HOUSING RETAINING TABS AND DETACH THE CABLE HOUSING FROM ITS BRACKET ON THE TRANSAXLE.

Aug 09, 2011 | 1999 Saturn SL

1 Answer

1997 nissan pickup won't shift. It is stuck in fourth gear


Usually I find one of three problems that cause a manual transmission to be stuck in a single gear. If the gear oil level is low then the shift forks and rails can get dry and bind enough that the rail sticks and won't move. The same low fluid problem can cause the sliding gear to become stuck hard enough on the splined shaft it slides on that it won't move or the shift interlock parts between the shift rails [which prevent two gears from being engaged at once] can break or bind which will also prevent the shift lever from moving. The shift lever and tower [the part the lever is fastened to on top of the transmission] may have to be removed to see if the problem can be fixed from the top or if the problem is internal and the transmission has to be taken apart and repaired. There are other problems that cans cause this such as bad internal bearings, broken or worn shift forks but they are fairly rare if the oil level is maintained and changed occasionally.

Jun 25, 2010 | 1997 Nissan Pickup

1 Answer

The gear shift gets stuck and won't shift into other gears.Will put it reverse and then try to put in drive and it gets stuck in reverse.


Either the shift knob or the actuator rod under the shift knob has worn out.
Remove the shift knob and pull the actuator rod (plastic) out of the shift lever and inspect it for wear or damage. If the rod is not worn or damaged, replace the shift knob and you will be good to go.
Good luck.

Nov 11, 2009 | 1997 Pontiac Grand Prix

1 Answer

How do you fix a shift cable


To replace the shifting cable for the gear selection, you have to remove first the console box where the gear shift lever is and once you have access to the cable look for a lock that connects the cable to the shifting lever and remove it. do the same on the transmission side of the cable, then when the cable is free from the linkages attached to it pull it out with care. If it is stuck on the brackets loosen and give a slight **** on the cable.

Oct 27, 2009 | 1989 Toyota Camry

1 Answer

1997 pontiac sunfire manual transmission won't shift out of gear.


What you can try is to remove the shift cables from the transmission side. then move the shifter and see if everything is free if it's still sticks then the cables are going to be replaced. if everything is moving with the cable off. then you need to remove the shift tower on the tranny (where the shift cable is I belive it's 5 bolts) remove the tower and you will see the shift pin. Inside the tower there is a cotter pin that breaks and that will cause you to have one gear and unable to selected another gear. If you are not mech inclined I would no attemped the shift tower repaire, the cables do it will save you money. The shift tower has bushings that can fall into the tranny.

Jul 02, 2009 | 1997 Pontiac Sunfire

2 Answers

2000 range rover


Pull hard on the steering wheel to the left and the steering wheel lock mechanism should release. I mean pull hard to left because shift interlock is froze if you cannot get it this way you will need a pro to help! Good Luck Mate.

Dec 07, 2008 | 2004 Land Rover Range Rover

Not finding what you are looking for?
1999 Dodge Intrepid Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...