Question about Ford Expedition

2 Answers

My lighter in my Eddie Bauer Expedition stopped working.

Posted by on

  • felicia_wynn Jul 09, 2010

    Im wondering how and where to check the fuses and voltage?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

Check the voltage at lighter connections.It will show exact 12 volt.If the voltage is checked ok. Then check out the fuse.
The fuse is under the hood and in the battery power distribution panel. The fuse would be either #4 (20A) or #1 (20A) which one is for the rear (console or other place). Fuse #3 in dash is only for cigarette lighter the cigar lighter fuse in the panel under the drivers side (fuse number 3). Also check the wirings if both lighter and fuse checked OK. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Jul 09, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

Check the fuse,if it is o k,then check the voltage to it,if it has voltage going to it,then the cig lighter is bad.

Posted on Jul 09, 2010

  • 1 more comment 
  • felicia_wynn Jul 09, 2010

    could you tell me how to do that?

  • felicia_wynn Jul 09, 2010

    I have no idea where to find the fuse box or how to check the volts

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 09, 2010

    You will need a test light,they are not exspensive,and it will have a long lead on it to clip to a ground,and you will have to remove the cig lighter socket,and test the center wire with the test light,it will light the test light if there is voltage to the fuse,I do not know where the fuse is located in the fuse box,but turn the key on,and test all the fuses,,ground the test light,and touch each side of each fuse,if only one side of a fuse lights,and the other side does not,then the fuse is bad.

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

virgils
  • 39 Answers

SOURCE: diagram bypass heater cord on 2001 ford expedition eddie bauer

the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply

Posted on Oct 11, 2008

  • 1214 Answers

SOURCE: 1998 Ford Expedition Eddie Bauer SERVICE ENGINE SOON light

Take the vehicle to any local auto parts store that will read the codes. WRITE THEM DOWN, and report back here for further help.

Posted on Dec 21, 2009

  • 396 Answers

SOURCE: A 2004 Ford Expedition Eddie Bauer driver side window not working

The entire assy. This uses a cable system and what you are hearing is the cable twisting and getting ready to snap. New units are available at Advance Auto parts

Posted on Jan 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Expedition VIN Style


get in touch with your local ford dealer and give them the vin #

May 27, 2015 | 2000 Ford Expedition Eddie Bauer

1 Answer

How do i find the location neutral switch on a 1999 Ford expedition eddie bauer 5.5 liter 2 wheel drive


It's on the side of the transmission under the drivers door. The shift cable runs to the control arm it is under.

Aug 28, 2014 | 1999 Ford Expedition

1 Answer

A 2004 Ford Expedition Eddie Bauer driver side window not working


The entire assy. This uses a cable system and what you are hearing is the cable twisting and getting ready to snap. New units are available at Advance Auto parts

Jan 14, 2010 | 2004 Ford Expedition

1 Answer

Ford expedition 98 eddie bauer is shaking


if you by shaking when idling. Time for a tune up.

Jul 21, 2009 | 2007 Ford Expedition Eddie Bauer EL

2 Answers

Diagram bypass heater cord on 2001 ford expedition eddie bauer


the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply

Sep 12, 2008 | 2001 Ford Expedition

1 Answer

2004 eddie bauer expedition problem


bad battery with dead cell
dead cells wont be seen on battery test
or alternator not functioning properly
you left your lights on somewhere in vehicle or connected to this a defective door switch when doors closed leaves lights on

Jun 10, 2008 | 2007 Ford Expedition Eddie Bauer EL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...