Question about 1988 Ford Bronco II

3 Answers

I was sitting at a drive trough and my 1988 bronco 2 just stoped running. I checked the inertia switch , but it was not tripped.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

In tank fuel pump is getting old

Posted on Oct 16, 2012

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I had a simular problem where i would be driving and my bronco would just shut off and i would wait about 20 minutes or so and it would restart i disconected the oxygen sensor and havent had a problem since

Posted on Aug 02, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Sounds like an ignition module.

Posted on Jul 09, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

88 bronco 2 is not getting power to the fuel pumps i changed the relay and the inertia switch stil no power

Check the wires going to the fuel pump relay for a ground with the ignition on. The reay requires a ground sent from the ecu to activate the relay and sent power to the fuel pump.

Jan 25, 2015 | 1988 Ford Bronco II

2 Answers

I have a 88' bronco its not getting fuel as long

Hello! lets first make sure the Inertia cut-off switch isn't tripped...See location diagram below...Guru...saailer


Feb 12, 2012 | 1988 Ford Bronco

1 Answer

Where is the Bronco 2 (1988) Inertia switch located?

inertia shut off switch is located on the toe panel area on the passenger side next to the transmission hump

Jan 30, 2011 | 1988 Ford Bronco II

1 Answer

Fuel shut off where is it located ???

for full size Bronco
Your vehicle's inertia switch is located behind the left side of the dash, above the brake pedal behind kick panel, there should be a hole to push reset button down. Just flip the switch back to ON position
Bronco II
opposite/passenger side in kick panel

Sep 24, 2010 | 1988 Ford Bronco

1 Answer

Cant find the ineryia switch 1988 bronco2 looked on right side 2.9 injected

The inertia switch is by the passenger left foot, it has Pink/Black & Orange/Blue wires. It’s connector in the engine bay is a Black Rectangular 2-Pin. (Inertia switch connector pictured) 29-50_3.jpg

Mar 04, 2010 | 1988 Ford Bronco II

2 Answers

I have a 1988 ford bronco ii that will not run. we replaced one fuel switch already but someone told me that there was another one, but I can not find it. do you know where it is. We were thinking that it...

Usually there is a sticker on the radiator support or somewhere in that area that lists where the fuel switch is. I believe there is only one though, near the passengers kick panel. Did you confirm you weren't getting power to the fuel pump?

May 05, 2009 | 1988 Ford Bronco II

1 Answer

BRONCO IS NOT STARTING MIGHT HAVE ACTIVAte the fuel switch to turn off i need diagram how can i fix this.

The Fuel Inertia Switch is Located At 1 of 2 Places 1 Under or at the passenger side Kick Panel Down where your Right foot is when sitting on Pass side. Or Inside the Back of the Vehicle behind one of the Side PANEL COVERS.PLEASE RATE ME !! Thank You

Mar 27, 2009 | 1988 Ford Bronco II

1 Answer

Cant find fuel pump relay on an 1987 bronco 2

The fuel pump relay should be at the pass. fender well. It may be under a cover that holds 3 relays together. Usually it has a green plug on it. Also check the inertia (crash) switch. It's located at the upper part of the pass. side floor inside the car. It'll be under the carpet midway up the firewall. Make sure it hasn't gotten tripped.

Jan 06, 2009 | 1986 Ford Bronco

3 Answers

Need 2 get truck started

I had a geo metro that sat a long time and the gas turned to varnish. You will need to drop the tank, clean out the gunk, put in a new fuel pump and and filter and flush the fuel lines out to the injectors.

Sep 05, 2008 | 1990 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides