Question about 2004 Dodge Stratus
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 dodge stratus SE
This is a dangerous job if you do not have the proper equipment for compressing the spring that is around the rear shock. I do not recomend performing this job without the proper equipment. Unloading the spring without it compressed can cuase injury.
If you have the proper equipment this is how you do it.
REMOVAL - SHOCK ASSEMBLY NOTE: Access for the nuts attaching the rear shock assembly upper mount to the vehicle is through the inside of the trunk.
Posted on Aug 30, 2008
jack up the car take the wheels off the caliper which holds the pads need to come off usally 2 bolts if you are replacing the rotors you may have to hit them with a hammer to break the free if they have little clips on the rotors you can grabb the clips with pliers and take them off you do not need to replace them make sure you push the pistons on the calipers back in clean and lube the pins and the any where the rest on the knuckle do get lube on the rotors put it all back together do the same on the otherside before you start the car pump the brakes until a good pedal then you are good to go i hope this helps you
Posted on Apr 13, 2010
it should be the mitsubishi 3.0 the upper plenum has to come off also the egr tube and the 2 brackets on the back of the plenum there back there youll feel them unhook all your connectors and tip the plenum up far enogh to get to the plugs once thats off theyre right there kind of a pain but can be done in a day in the driveway no problem hope this helps
Posted on Jun 10, 2010
Testimonial: "Once I figured out what the plenum was it made sense. Thanks"
Tips for a great answer:
Feb 18, 2014 | 1997 Dodge Stratus
Dec 15, 2010 | 2002 Dodge Stratus
Aug 06, 2010 | 1999 Dodge Stratus
Apr 21, 2010 | 1999 Dodge Stratus
Jul 14, 2009 | 1998 Dodge Stratus
Apr 29, 2009 | 2001 Dodge Stratus
254 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: