Question about 2001 Jeep Grand Cherokee
Check the catlitic converters. it has two. After running hot , it probably runs a real lean mixture and that will ruin the converters, and car will run rough.And in some cases it will not stay running properly after getting overheated.
If the converter checked out ok then other possibilities to be checked are.
1) the radiator.
2) The radiator fan.It should start running when jeep gets overheated.If not then this is the cause.
3) The freon/coolant problem.Either a coolant leak or jeep low on coolant.
4) The water pump leaking.Or the water pump blocked or loose.Check it first before going for replacement.
5) The faulty ac thermostat.
6) The sensors.IAC and O2 sensors.
Get the coolant pressure tested first to continue troubleshooting.At any local car garage the pressure test is done.
Also for more help then its advisable to get jeep scanned at diagnosis center to get error codes, At diagnosis center you will receive the error code.As per the error code it will detect the exact faulty part in the jeep due to which the problem is occurring.For more help :--- at www.autozone.com its absolutely free to get car scanned.
Thanks. keep updated for any more query.you can rate this solution and show your appreciation.
Posted on Jul 08, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 27, 2014 | 1993 Jeep Grand Cherokee
Mar 04, 2011 | 2001 Jeep Grand Cherokee
Mar 01, 2011 | 2001 Jeep Cherokee
Feb 12, 2011 | 2001 Jeep Grand Cherokee
Jan 21, 2011 | 1996 Jeep Grand Cherokee
May 21, 2010 | 1997 Jeep Grand Cherokee
Mar 09, 2009 | 1996 Jeep Grand Cherokee
Jul 24, 2008 | 2002 Jeep Grand Cherokee
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: