Question about 1999 Buick Century

2 Answers

The inside rearview mirror fell off my 1999 Buick Century. I have the adhesive but I caanot figure out how to remove the base from the mirror so there is very little weight pulling on the adhesive while it cures.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. Had to cut the wires to the lights in the mirror so I could stop it from dangling down. After that I did figure out how to just unplug it, but, there ain't no set screw on my mirror and I'm at a loss how to get the attachment anchor that goes to the windshield from the mirror assembly

Posted on May 06, 2013

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 55 Answers

Should be a tiny allen screw holding it in..

Posted on Jul 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 99 mustang Cobra rearview mirror fell off. I Need to detach the mirror from ceiling of the car. the mirror is swinging back and forth when I Drive


Why not put the mirror back on, you can buy the adhesive mirror pad kit from any auto parts store for a few dollars, just follow CAREFULLY!! the instructions in the kit, and you have a mirror again. The whole job takes less than 15 minutes. as to removing the mirror there should be a small connector at the rear of the mirror to disconnect it from the wiring harness.

Aug 12, 2016 | 1999 Ford Mustang Cobra

1 Answer

How to repair Acura 2002 TL 3.2 rear view mirror?


there is a super glue made by loctite products that is especially for glass
it is used by manufacturers to stick the base of the rear view mirror to the glass

May 10, 2016 | Acura TL Cars & Trucks

1 Answer

Rear view mirror fell off the windshield of my 2001 Buivk Century,how do I reglue it?


Take it to either a body shop or a windshield repair place and they will probably do it for you while you wait & inexpensively, using the proper adhesive.

Jul 18, 2012 | Oldsmobile Cars & Trucks

1 Answer

I have a 2000 buick regal. the rearview mirror fell down. How do i get the metal piece out to reattach to the windshield?


should just be a torx 15 also t15 screw driver to unscrew it and u must use the rearview mirror adhesive sold at most parts stores

Jun 12, 2011 | 2000 Buick Regal

1 Answer

HOW DO I REPLACE THE REAR VIEW MIRROR ON MY 1999 BUICK LESABRE LIMITED


  • Push the mirror lens upward so it faces the roof of your Buick LeSabre.

  • Place the eight-pointed star head of the Torx driver into the setscrew located in the base of the rearview mirror. Turn the Torx driver counterclockwise. This releases the clamping pressure on the mirror.

  • Slide the mirror upwards to remove it from its metal bracket.

  • Place the base of the replacement mirror against the windshield, directly above the metal bracket. Slide the mirror down into the bracket. The bracket has a groove on each side into which the mirror will slide.Secure the mirror to the bracket by tightening the setscrew clockwise with the Torx driver.



  • May 04, 2011 | 1999 Buick LeSabre

    1 Answer

    How do I attach a review mirror for a 1994 thunderbird lx


    Go to an auto parts store and buy rearview mirror adhesive. Your rearview mirror will separate from the small mounting piece that adheres to the windshield. Clean off the glass where it will sit. Follow the directions on the adhesive package and install the mount on the windshield. Once it dries, install the mirror on the mount. Rearview mirror adhesive is one of the most powerful adhesives on the market. Don't use anything but rearview mirror adhesive or the mirror will not hold.

    May 21, 2010 | 1994 Ford Thunderbird

    1 Answer

    Rearview mirror fell off windshield while car was parked unused for a week


    You can buy a special bonding adhesive at a parts store to fix this. Usually there is a piece that the mirror attaches to, which is glued to the windshield. You will need to follow the instructions on the bonding adhesive, which will include cleaning the area where you will attach the mirror, and usually you separate the base mount from the mirror, glue it, hold in place with pressure for about 1 minute, reattach mirror, and you will be good to go.

    Jul 30, 2009 | 2004 Subaru Forester

    1 Answer

    How replace mirror on windscreen?


    This happens a lot. There are several brands of adhesives sold at autoparts stores just for rearview mirrors. You should see an outline of the glue on the inside. Take some tape on the outside and mark where the glue is. Then use a razorblade and the solvent in the repair kit and clean the inside. The mirror comes out of the holder with an allen wrench. Follow the instructions in the kit and press the mount to the windshield. Hold it there at least 3 minutes. Wait for it to dry per instructions. Then add the mirror and lightly tighten the mirror to the base. I like the kits which have 2 parts of glue. On my car I let the excess glue stay on the window.

    Jul 01, 2009 | 2001 Ford Windstar

    1 Answer

    Chevy S10 Rearview Mirror glue sticks, but temporarily


    At this point, I'd take it to a glass shop that does windshields and let them try the commercial adhesive.

    Jun 16, 2009 | 2004 Chevrolet S-10

    1 Answer

    Rearview Mirror Adhesive... Mirror is no longer attached to the mirror. Rearview Mirror kit from Advanced Auto Parts didnt work.


    The product does work fine, you can try it again. Make absolutely sure that all of the old adhesive has been removed, I use a new, sharp razor to remove the old stuff on both surfaces. Be sure NOT to touch either of the clean areas with your fingers. If you do, take acetone and wipe that part clean. follow the directions and good luck.

    Jun 05, 2009 | 1999 GMC Jimmy

    Not finding what you are looking for?
    1999 Buick Century Logo

    638 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7754 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...