Question about 1994 Ford Taurus

1 Answer

Power windiws power windows won't work

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 580 Answers

More than likely you have a broken power wire drivers side front door. This happens from the constant opening & closing of the door. Peel back the outer casing of the wiring harness at it's flex point & check & mend any broken wires. Good luck!

Posted on Jul 08, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

How much would a motor for the windiw for a 2001 ford mustang be?

Hi Destinee

You can price it on Rock Autos web site.

Aug 29, 2016 | Ford Cars & Trucks

1 Answer

Power windiws will not work

So no windows work? Is the window safety lock off? . What year and model? Some power windows have fuses, some have relays, and some (most) have circuit breakers which automatically reset.
One thing all have in common is that the driver's door switch is called the master switch. From the (?circuit breaker?), and with the key on, one hot wire will come into the master switch connector- it is only hot in on or run. And the ground for the power windows starts at this switch and goes back into the cabin to a nearby ground. If no windows work and no liquid was just recently spilled on the master switch, you need to check for broken wires in the door opening. The multi-wire harness in the door opening may be covered by a rubber boot-peel it back or take it off and check the wiring. The ground wire is usually black. A wiring diagram would indicate the color of the power wire. If you have a voltmeter or test light, and can get at the connector for the master switch, turn the key to on and probe all terminals in the connector. There should be one hot wire to the connector for the windows. If you have it, and it is not for the locks or some other function, then possibly the master switch is bad or the ground wire is broke or not connected.
On some vehicles, the master switch can be removed from the door panel to get at the connector. On others, the door panel has to be removed first to get at the switch and connector.

Aug 26, 2014 | Cars & Trucks

1 Answer

Windiw in truck will not go up

There are many possibilities that can cause this problem.It can be faulty window motor,or control switch or its issue with fuses and relays or its the problem of loose/short wiring.
For step by step troubleshooting click the link below and follow the details:----
This will help.

Sep 30, 2013 | Cars & Trucks

1 Answer

My asb light comes on when starting and stays on. Lights won't come on , power locks won't work, power windows won't work, radio won't work. All fuses are good and car runs fine.

Those are all really common symptoms of the alternator going bad on those cars. I would have it checked to make sure it's charging properly.

Dec 15, 2012 | 1996 Oldsmobile Cutlass Ciera

1 Answer

Drivers side windo will not open but the passenger windiw works what is the problem?

could be the motor died,, Jump it with a 12v source to make sure its working, if it is check the alignment of the window rails in the door to make sure its not binding,, switch the window switches to see if its a faulty switch, they pop out of the holders pretty easy

Jun 12, 2011 | Ford Freestar Cars & Trucks

1 Answer

Automatic door locks and power windiws stop working

Hello. Welcome to FixYa. Please allow us to assist you.

Having seen this exact same problem many times over, we would suggest that you replace the driver side door window/lock master control assembly. This is a very common problem with over 10 years of age. The contacts in the switch wear out over time.

Thanks for choosing FixYa today

Mar 06, 2011 | 1996 Toyota Camry

1 Answer

Radio no sound and windows need reset

Not enough info to help with the radio, but the windows are easy. Get in, start the Rover, press the window switch until the window is all the way down and continue to hold the switch down for an additional 10 seconds. Then roll the window all the up and continue to hold the switch down for 10 seconds. Repeat for all the windows. If it does not clear the dash panel warning - do it again. Same for the sunroof not set warning.

Jun 25, 2009 | 2002 Land Rover Range Rover

Not finding what you are looking for?
1994 Ford Taurus Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers


Level 3 Expert

5579 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides