Question about 1995 Mazda Protege

1 Answer

Where is the oil filter and drain plug located??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 17,970 Answers

where is the oil filter and drain plug located?? - 9f8bafe.gif

Check the part in the bottom left of the graph (30--41...) Replace the drain plug seal.

Posted on Jul 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is there an oil drain plug on a 2000 Buick LeSabre, and if so, where is it located? I see the oil filter, but no drain plug anywhere. I was wondering if you just remove the filter and let the oil drain...


You do not say what size eng you have but the drain plug will be on the low part (deep part of oil pan which houses the oil pump) of the oil pan either on the bottom or some times along the side or back. It is definitely not drained through the oil filter. Let me know if you find it. Thanks.

Jan 03, 2011 | 2000 Buick LeSabre

Tip

How to change the oil in your car


Attention: Read each step completely before you begin that task. Tools Required:
#1: Oil filter wrench or pliers
#2: Small wrench and sockets (Metric sizes for import cars)
#3: Oil collection device (pan or bucket)
#4: Funnel
#5: Cloth rag or paper towels
#6: Jack and stands or ramps
Supplies Required:
-Correct amount and type of oil, and thrust washer if necessary
-Correct oil filter
Step 1: Determine the correct oil type, oil filter type and size, and amount of motor oil for your car. (Information found in owner's manual)
Step 2: Park your car on level ground and turn off the engine.
Step 3: Locate the engine and make the oil pan accessible. (With the use of jack and stands or ramps) Tool #6 required.
kormega_11.jpg
Step 4: Remove oil cap. (Located on top on engine)
kormega_12.jpg
Step 5: Loosen oil drain plug. Collect oil when draining and dispose of properly. (Located on oil pan which is attached to the bottom of engine block, directly below oil cap)
Tool #2and 3 required
Caution: Oil will start to drain and may be hot
kormega_13.jpg
Step 6: Once completely drained (a slow drip), replace oil plug. Install new thrust washer with oil drain plug if necessary. Do not over tighten.
Tool #2 required
kormega_14.jpg Step 7: Loosen oil filter. Collect oil when draining and dispose of properly. (Attached to the side or bottom of engine)
Tool # 1 and 3 required
Caution: Oil will start to drain and may be hot
kormega_15.jpg Step 8: Install new oil filter hand tight. Lube the rubber O-ring on oil filter with motor oil, and make sure the O-ring from the old filter is not still on the oil filter connector.
kormega_16.jpgkormega_17.jpg Step 9: Pour correct amount of new motor oil into engine.
Tool#4 required
kormega_0.png Step 10: Check for oil leaks from drain plug or oil filter.
kormega_18.jpg Step 11: Turn on engine and continue to check for leaks. Tighten oil drain plug or oil filter if necessary.
Step 12: Turn off engine and check oil dip stick to see if the right amount of oil has been added. After removing oil dip stick, wipe clean with rag or paper towel. Reinstall oil dip stick and then remove again to see correct oil level. Then Reinstall oil dip stick again.
Tool #5 required
kormega_19.jpgkormega_20.jpg Step 13: Lower vehicle from jack and stands or ramps.
Step 14: Record the mileage of the car for future reference. (Motor oil should be replaced about every 3 months or 3,000 miles)kormega_21.jpg

on May 03, 2011 | Nissan Maxima Cars & Trucks

1 Answer

What are the step by step instructions to change my oil in my 2008 Chevy Malibu LTZ?


Find the oil drain plug, remove, drain the oil into a pan, reinstall the drain plug a tighten, locate the oil filter and remove, check mounting surface to make sure the old gasket didn't stick. Coat the new filter gasket with oil and install hand tight. Refill the oil, make sure that you do not overfill. Start enigne for about a minute, shut off and double check the level, and that the filter and drain plug do not leak.
Some engines can be difficult, to identify the location of the drain plug and filter. There are thousands of configurations out there, If you are not familiar or can not locate the plug and filter, take the vehicle to a shop for service.

Apr 11, 2010 | 2008 Chevrolet Malibu

1 Answer

Change oil filter honda civic 2003


buy new oil filter, oil, and a new drain plug and gasket. the used plug is prone to leakage. remove drain plug and drain in a big enough pan for all the oil. oil filter is located on rear of engine. easier to remove from the bottom of the car. put oil on the seal of the new filter and hand tighten. replace oil plug with new gasket and plug and tighten to 33 foot pound. add oil that is required and start car. when oil light goes out shut car off and check oil add oil as needed.

Oct 12, 2009 | 2003 Honda Civic

1 Answer

I need to change the oil and filter. What size is


Make sure your car is off and cool (cannot have been running for the last hour as the oil will burn)

Owner's manual will say exactly what oil and oil filter to use. Most stores have cross reference sheets as well

You'll need a socket wrench with an adapter for the oil filter and an adapter for the drain plug
You could get an oil filter strap as well instead of the adapter.
Your filter will be located on the bottom of the engine, either on the front or back of it

Remove the filler cap on the top of the engine....

Put a drain tray under the drain pan and remove the drain plug (it will leak oil out as you're loosening it). Do not lose the drain plug as you'll be using it still. Check plug to see if there's any extra metal on it (ie. engine parts are grinding) Let drain and then repeat for oil filter.

Once completely drained, put the plug back in and then poor a bit of oil into the oil filter and then reinstall the filter. Pour the required amount of oil in through the top of the engine and close the cap....

Sep 15, 2009 | 2002 Mazda Tribute

1 Answer

Where is the oil filter located?


The engine oil filter is located just right of center if standing in front of the car. By removing the LARGE Black cap with the 36mm nut you will expose the filter element, make sure to do this before draining the oil from the drain plug in the pan. Otherwise the filter will still hold oil until loosened a bit. A typical oil change should go like this.
1. Engine Hot, not running, Loosen filter housing, don't remove yet.
2. Drain Oil, Replace plug.
3. Remove and Replace filter and O-Rings
4. Add oil.

May 08, 2009 | BMW 530 Cars & Trucks

1 Answer

Lost manual can't find oil filter location and drain plug


remove bottom cover under car the filter is at the bottom of the engine as is the drain plug for the sump ,very easy to do

Apr 04, 2009 | 2005 Subaru Forester

Not finding what you are looking for?
1995 Mazda Protege Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...