Question about 2003 Nissan Murano

2 Answers

Periodic clunck in front end - 2003 Nissan Murano

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 2,359 Answers

A 2003 SUV will clock in over 80,000 miles.

It's time to inspect the shocks and struts.

The periodic clunck you hear in front end can cause by


mud guard boot to metal strut body contact

worn strut center post to body of strut contact

worn rubble linkage

or combination to all of the above.


I would take the SUV to a good car wash that has under carriage cleaning.

Let the SUV dry and inspect it someone who can compress the front end.

If the front of the SUV re-bound two times then the struts will need to replace.


Posted on Jul 08, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 578 Answers

The clunk cause on my Explorer was a missing rubber bushing on the sway bar holding bolt. I removed the bolt and installed a new bushing - clunk is gone. Now my remaining problem is the squeaking in the front end. Ford cost reduced it by not including grease fittings. Now the dry components have tobe REPLACED.

Posted on Jan 03, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front end clunck noise on front left with severe tire wear on the inside of tire.happens going strait and on turns over bumps


ball joint has gone or could even be the wheel bearing. jack up the front with wheel on and hand on wheel 9 to 3 and wiggle and then 12 to 6 do the same if there is alot of movement the bearing has gone. ball joint check all the connectors on that side steering etc if they move side to side easy then the ball joint has gone they should be stiff to move.

Mar 16, 2014 | 2004 Dodge Ram 1500

1 Answer

Cluncking noise from front end when pulling away / braking hard and some times when turning


You didn't say what make or model or year, but This could be so many things. Bad ball joints, bad control arm, bad struts, strut plates, bad CV joint, bad inner tie rod, bad wheel bearing, caliber , sway bar, . Not enough info, but if you put vehicle in the air and pry wheel around looking for anything loose in the steering components, this is the best thing to do, and it will give you a better idea of what's going wrong

Feb 06, 2013 | Ford Transit Connect Cars & Trucks

2 Answers

There is a cluncking noise in the front end when moving the steering wheel front wheel drive


If you are only hearing this clunking sound when you are turning then you need to have your cv axles replaced. Also known as half-axles. In a truck, these are known as the universal joints. You can take your vehicle to the local tire/front end clinic and they will tell you whether or not, it is worth the fix.

Oct 24, 2011 | 1996 Ford Taurus

1 Answer

Cluncking noise while driving


check your sway bar end links, when they go or break they make clunking noise, you can usually grab them and see if they are bad or making noise

Mar 29, 2010 | 2005 Mazda Tribute

1 Answer

Cluncking noise coming from the frontwheels


Have the suspension parts checked on your car, probably a leaking shock absorber or a faulty control arm.

Feb 10, 2010 | 2002 Chrysler Voyager

2 Answers

A loud cluncking when I turn the steering wheel to


Its the drive shaft outer swivel joint.
It needs replacing.

Oct 25, 2009 | 2000 Pontiac Sunfire

3 Answers

Front end cluncking noise on a 1997 ford explorer AWD


lower control arm bushings are worn out, very common on explorer.

Jun 26, 2009 | 1997 Ford Explorer AWD

1 Answer

Hello, My 1998 town and country had a 'clunck" sound on both sides of the front end when I go over bunps. i've replaced structs, arms and other parts on the front suspension, but the mechanic told me there...


this i just went through it was very hard and alot of money but it was gust the sway bar bushings the rubbers wear very chea at local parts store about 20 min. to install cost 25.00 for part

Dec 24, 2008 | 1998 Chrysler Town & Country

Not finding what you are looking for?
2003 Nissan Murano Logo

431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...