Question about 1998 Chrysler Sebring

1 Answer

Have code problems 1 p0122 TPS 2 p0106 map ckt 3 p1489 manuf spc 4 p1496 manuf spec how to fix also can I reset the security code because now the car won't start. no injector pulse detected. tks joe

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 757 Answers

Resetting the security code will not help the car start if you have a TPS (throttle position sensor) problem.
If the TPS is far enough out of position or has a faulty electrical connection then the proper voltage by the TPS cannot be read by the engine computer to thus calculate fuel mixture and spark timing.

Considering the rest of the DTC that you are seeing, it is highly suspect that you have a simple break in a wiring harness. Check your wiring and sheaths to all of your sensors up to and including any corrosion or breakage on the connectors, all the way back to the multi-connector on the computer.

Posted on Jul 08, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2002 subaru forester p0328 knock sensor p0301 cyl 1 misfire p0303 cyl 3 misfire p0106 map/baro ckt rng perform

0106, 0301, and 0303 indicate large vacuum leak. Intake gaskets or map port broken. If the leak is noisy, it could also cause the 0328. Fix the leak and clear the codes to see if any come back.

Aug 06, 2017 | Subaru Cars & Trucks


Replacing Throttle Position Sensor on 2004 kia sorento

My issue was my Engine light came on and I went to Autozone and O'reilly's to have them scan why my engine light came on and they told me it was putting up Error Code P0122. Looking at some forums and post was able to fix my issue on my own. Now if you replace your TPS module and the issue has not cleared you can move on to the next step in troubleshooting your error code, but in my instance the replacement fix'd mine. Here is the process I used which took about 10-15min and saved me about $300;

1. Obtain new part (I ordered my OEM part from ebay $30-$60)
2. Disconnect battery,Positive side.
3. mark the current position with a sharpie or something, you want to install in the exact position the original one was in before removing. (take a pic with your phone).
4. Disconnect the wire to the TPS module/unit.
5. Unscrew the unit (should be x2 screws, note how tight the screw is, you'll need to put same tightness when re-applying screws).
6. Put new Module/Unit in place matching the original position of the old one, just line up where you made the marks and secure with screws.
7. re-connect the wire back to the TPS module/unit.
8. re-connect battery.
9. start your car and your done.

Your check engine light should be off now for code P0122. if still on, it may be another code and if so continue troubleshooting the other codes/issues. This process resolved my Error Code P0122.






on Nov 16, 2015 | Kia Sorento Cars & Trucks

2 Answers

I trouble with P0106, P0442, P0455

code p 0106 refers to manifold absolute pressure(MAP) sensor / barometric pressure (BARO) sensor---range /performance problem===causes --intake exhaust leak---wiring---MAP sensor---BARO sensor
code p 442 refers to evaporative emission(EVAP) system--small leak detected===causes --hose connections ---intake leak---EVAP cannister purge valve
it also refers to EVAP system ---large leak detected ---cap loose/ off ===causes --mechanical fault , hose connection EVAP pressure sensor
code p 0455 refers to EVAP system --large leak detected ===causes same as for p 0442 causes

Jul 07, 2016 | Plymouth Grand Voyager Cars & Trucks

1 Answer

Reset code for a 2011_akia rio throttle position sensor

Throttle Position Sensor Replacement - YourMechanic > Auto Repair and Maintenance Services
When the throttle position sensor is repaired or replaced, it will need to have the minimum idle speed reset to factory specs, and the trouble codes will need to be ...

P0122 Code - Throttle Position Sensor/Switch A Circuit Low ...
Also includes links to other forum threads discussing the code. ... P0122 Code -Throttle Position Sensor/Switch A Circuit Low Input ... I have 6 codes that stay the same. all the rest don't stay after reset. codes are P0106,P0107,P0108,P0122 ...

2002-2005 Kia Sedona Throttle Position Sensor ... - YouTube

? 1:51
Jul 11, 2011 - Uploaded by Jerry Ferguson
Kinda important - Before removing the old throttle position sensor, snap a photo of its position with your phone ...

Dec 26, 2015 | Cars & Trucks

1 Answer

Codes p1684 p0122 p0320 p0106 p1282 p1495 are on 2001 town country what do they mean

a collection of codes like these need to be erased and then see which ones come back. this kind of thing often happens when the engine is cranked for a long time.
1- 1684; battery was disconnected
2- 0122; tps
3- 0320 engine speed malfunction
4- 0106 map
5- 1282 excessive injector pressure
6- 1495 leak detection pump

Mar 15, 2013 | 2001 Chrysler Town & Country

1 Answer

I have five fault codes for my GM Safari Van what are they and how can I find out what they mean? P0507,P0122,P0106,P0108,P0122

P0507, Idle Control System RPM Higher Than Expected
P0122,Generic TPS/Throttle position sensor A circuit low input
P0106, Manifold Absolute Pressure barometric Pressure Circuit Range/Performance problem
P0108, Manifold Absolute Pressure ( MAP) Sensor circuit high voltage.

Good luck

Dec 16, 2010 | GMC Safari Cars & Trucks

2 Answers

Please can you give me the code of TPS of Chevrolet Epica 2004

There are 3 DTC codes related to the TPS....

1. P0121 - Throttle Position (TP) Sensor Performance

2. P0122 - Throttle Position (TP) Sensor Circuit Low Voltage

3. P0123 - Throttle Position (TP) Sensor Circuit High Voltage

If there is any further assistance, please let us know

Sep 27, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

1999 chrysler concorde fault codes: p1684, p0122, p0106, p1496 and p0405

you need to get a dodge fault code book to convert those

Aug 26, 2010 | 1999 Chrysler Concorde

Not finding what you are looking for?
1998 Chrysler Sebring Logo

736 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides