Question about 2006 Cadillac STS
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you should have to go thru under the hood to the backside of the lamp assembly. There should be either a hard plastic cap or a plastic dust cover that has the wires going thru it to the lights. If it is the hard cover (looks like a jar cap) turn it 1/4 turn counterclockwise and pull it out of the way. Take the bulb/socket out. Unclip the old one- Put the new one in. (DO NOT TOUCH THE GALSS PART OF NEW BULB). Then re-assemble
Posted on Mar 11, 2010
you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck
Posted on Jan 30, 2009
Two hour job in your driveway. Lift the side needing replaced, remove plastic clips and the wheel liner. Unbolt the bumper face starting from the wheelwell and working in. When replacing the passanger side, remove the bolts holding the fuse box in place and move to allow more room. the replace is made through the wheelwell reaching in.
Posted on Dec 03, 2009
follow the spark plug cables.. one end is the coil pack... the other end is the spark plugs if you still can't find them... that's not a diesel by chance is it ?
Posted on Feb 26, 2009
the oil filter is not a regular looking filter, its a cartriage type that goes into a housing, if you open the hood and look on the driverside of motor near the oil fill cap you will see a cover cap with a nut shape head on top, use a 24mm socket on a rachet and unscrew the cover,then pullfilter out, install new filter and replace oring provide with filter on the cap. hope this helps.
Posted on May 12, 2010
Testimonial: "This was great. I found it immediatly."
Tips for a great answer:
May 22, 2016 | 2006 Cadillac STS
Mar 16, 2013 | 2005 Cadillac STS
Jun 27, 2012 | 2006 Chevrolet Impala
Nov 02, 2010 | 2006 Cadillac STS
Oct 28, 2010 | 2006 Cadillac STS
Aug 30, 2010 | 2006 Cadillac STS
Nov 28, 2009 | 2005 Cadillac STS
Apr 04, 2009 | 2006 Cadillac STS
1,920 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: