Question about 1996 Chevrolet Camaro
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: my 89 camaro
most likelly you fuel pump relay stuck close try to replace it,
and also look for posible bypass circuit installed to run fuel pump all the time, if you bought the car with the problem may be some one by paaseed but if not the replace the fuel relay
Posted on Jun 15, 2008
SOURCE: replace door skin on 1996 camaro
on our camaro it has plastic retainers on bottom remove with a small pry bar one at a time going from one sode to the other and remove arm rest and on some the door lock knob on top of door and it should come off by pullin up on it with window down
Posted on Mar 27, 2009
SOURCE: 84 camaro turbo kit
Before you put a turbo on your going to want to replace your head seals,piston, etc... If youve already done this i would direct you to thirdgen.org they will be able to help ou, there is most likely already a thread about this question. ( this is much to involved to answer here)
Posted on Mar 29, 2009
SOURCE: AC stopped working
Try disconnecting the battery for a minute or so and reconnect it. Believe it or not this has worked for me numerous times. If this doesn't work then disconnect the switch on the accumulator. The accumulator is located in the low side (big) hose near the firewall on the passenger side of truck. Using a paperclip jump the two wires (harness side) together with engine running and a/c on. If compressor kicks on when jumped either it's low on freon or the switch is bad. Hope this is helpful.
Posted on May 21, 2009
You find the AC low pressure at the top of the compressor, orientated toward you , facing the front of the
vehicle. You can also follow the compressor line to reach the port.
The valve is covered a plastic cap covering it.
Near the compressor you find two ports, the high port and low port.
To find out which one is the low port, run the air conditioner for a couple of minutes withthe engine on.
Then turn off the care and touch the lines from compressor to the two ports covered with plastic caps. Only one of the pipes will be cold, the cold line will lead you to the low port.
Posted on Jun 18, 2009
Tips for a great answer:
Jun 07, 2011 | 1995 Audi 90
May 11, 2011 | 1997 Honda Accord
Aug 03, 2010 | 2006 Chrysler Town & Country
Aug 31, 2009 | 1992 Jeep Wrangler
Aug 19, 2009 | 1997 Chevrolet Malibu
Jul 11, 2009 | 2004 Dodge Durango
May 28, 2009 | 1990 Honda Accord
May 26, 2009 | 1995 Acura Integra Coupe
May 09, 2009 | 1996 Pontiac Grand Am
Jun 24, 2017 | 1996 Chevrolet Camaro
379 people viewed this question
Usually answered in minutes!