Question about Jaguar S-Type

1 Answer

How do I remove the window (rear drivers) from my S Type Jag? I need to replace the raising/lowering mechanism

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! Here are few tips to remove the mechanism. First you should unscrew the door opener inside and the handle. Once you removed the screws you will need to detach the trimmings which is secured by plastic snaps. YOu will have to pull the trimming carefully. Once you removed the trimming you will have access to the window mechanism, you will have to lower the mechanism a bit to gain access to the 10mm bolts that holds the window. Once the window is removed you can now start removing the window mechanism. YOu will need a little help from a friend to hold the window for you to avoid breakage. Hope this helps and have a good one!

Posted on Jul 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove rear bolster cushion from s type jag


pull up the front of cushion on either side in turn, put your fingers under the front edge about 10 inches from outer edge you will feel a little plastic lever, you slide to one side, repeat for other side you can then remove seat cushion.

Feb 23, 2014 | 2005 Jaguar S-Type

1 Answer

Replace drivers side window hardware


Here is a link to some excellent instructions for replacing the window regulator:
http://www.dormanproducts.com/DigitalAssets/Document/741-808_IS.pdf

Apr 07, 2013 | 1998 Ford Contour

1 Answer

How do i reset my one touch window button on my 03 x type jag


Hi,
It sounds like you have disconnected the battery at some point. That would require you to reset the windows. Simply you need to lower the window, then raise the window all the way up. Keep your finger on the window switch for a few more seconds. You should here a faint click from the door glass regulator. This is the indication that you have successfully reset the one touch operation. Repeat the process for all the other windows.

Nov 01, 2009 | 2003 Jaguar X-Type

2 Answers

How can i fix my broken drivers side window on a jag s type year 2000. the power is there but i will not go up or down all i can here is a crunching noise


sounds like the window has come off the metal scissor runner, there is a metal fixture attatched to the bottom of the window, which has a channel groove,,,, the scissor runner has a nylon wheel at either end,which sits into the window frame groove..if these wheels come out, they cause a crunching noise..so, you need to remove door panel, and put window frame and runners together

Jul 27, 2009 | 2000 Jaguar S-Type

2 Answers

Water pump replacment precedure on 2001 jag stype 3.0


Hello
To replace water pump : Raise the car
1- Drain cooling system. 2- Remove drive belt tensioner clip (if there is one) 3- Remove accessory drivebelt * Rotate the belt tensioner counter clock wise , 3/8 inch square drive bar should do it
* Remove accessory drive belt
4- Lower the car 5- Remove the upper shield. 6- Remove the throttle body. 7- Detch the coolant hose from housing assembly. 8- Remove the upper radiator mounting bracket 9- Detach the hose assembly from the water pump and lower hose. 10- Remove the hose assembly * Detach the hose clips
11- Remove intake manifold support bracket * Detach wiring harness
* Remove intake manifold support bracket
12- Detach coolant hose from water pump 13- Remove coolant hose from the water pump to lower housing. 14- Remove water pump
Installation :
in reverse order and make sure to use new gaskets and seals

Jul 07, 2009 | 2001 Jaguar S-Type

1 Answer

Driver side rear window doesn't move (electric)


the regulator inside the door has either broken its cable or came loose have to remove door panel inner plastic sheet and look usually u have to replace regulator requiring drill ratchets and silicon about 2-3 hours for semi experienced mechanic can find step by step help in chiltons manual for car availible at most auto parts stores

Jul 07, 2009 | 2004 Pontiac Grand Prix

1 Answer

I WANT TO FIT A TOWBAR TO MY 05 REG X TYPE ESTATE JAG


Yes you do need to remove the bumper, remove the 2 torxs screws in each wheelarch, 1 upper bolt and 1 lower bolts behind the wheelarch liner each side. two nuts inside car each side along upper edge, 4 nuts behind trim on rear edge, and 3 plastic plugs along lower edge. Hope this helps

Jan 26, 2009 | 2007 Jaguar X-Type 3.0 Sedan

1 Answer

Rear window on driver's side slides down


I've had this problem and I believe its a common problem with S types. There is a white plastic slider that wraps around a metal strut and moves up and down as the window opens and closes. The problem is that the plastic slider breaks if the car door is slammed when the window is half way down, When this occurs the slider breaks free and the wire that pulls it up and down wraps itself around the motor and jamms everything up. The fix is to replace the window regulator as a complete unit. This fairly straight forward and worth the effort as you most likely will be replacing the other regulators if you keep the car for a while. Buy the regulator either from Jag dealer or OEM part which is approx 1/2 the cost (I found mine on ebay!). Make sure your get the correct unit, left, right, front and rear are different. Take off the door panel, its all clips except you need to unscrew the two scews under the rubber insert in the door pocket first. After you have removed the panel remove the black plastic cover as well. You need to detach the glass window from the regulator, This is done by punching out the brass insert in the middle of the plastic plug that is pushed through a hole in the glass. Be careful, if you hit it too hard you can break the glass, I ended up drilling it out as this was easier. Once you have the plastic plug out the glass is detached and you can remove the regulator. This is just a few screws, the only tricky part is to get the angle right to pull it out the door frame. Installation of the regulator is just the reverse. Good luck.

Sep 07, 2008 | 2000 Jaguar S-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...