Question about 2003 Toyota RAV4

2 Answers

Central locking on my Toyota RAV4 is working on opening 3 doos only. Driver door not responding to the remote.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi I have a rav 4 the central locking works on 3doors but won't work on the driver side door

Posted on Sep 29, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 6,826 Answers

The actuator for the power locks is probably frozen or bad, or else the wiring has broken to it. Or, the body control module is bad.

Good luck in fixing this.

Posted on Jul 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you know where the central door module is located on a 2008 toyota rav4


check the rear view mirror if there are wires running to it it might be mounted under the head liner with the sensor by the mirror

May 24, 2015 | 2008 Toyota RAV4

1 Answer

Central locking


doors should open/ lock. with remote both.

Jan 12, 2014 | 1992 Mitsubishi Mirage

1 Answer

How will i repair central locking in 99 toyota yaris on driver side


If all other locks work with the remote and the inside lock switch then the most likely cause is a stuck lock actuator on the driver's door, the door panel should be removed to check and replace it.

Feb 18, 2012 | Toyota Cars & Trucks

1 Answer

Power door locks keep clicking off and on... Sometimes when we try and use the key it sets the alarm off... Remote key will not open passenger door but will open and lock others...


CHECK THE PASSENGER DOOR FOR A HOT WIRE THAT HAS A BAR SPIT THATS GROUNDING OUT USUALLY ITS 2 TO 3 INCHES FROM THE AWITCH IT SELF. THIS IS COMMON ON THE RAV4

Aug 04, 2011 | 2002 Toyota RAV4

1 Answer

I have toyota Rav4 2003 and my driver side door lock is not opening with fob. So, pls can you give me suggestation.


if all the other doors are opening and at the master switch it want work either it will need a new door lock actuator

Jun 15, 2011 | 2003 Toyota RAV4

1 Answer

Can not lock car by key remote . toyota rav 4 53 plate


If your car has an alarm with a separate remote, it is a separate system and it is probably self-arming. When you lock the doors with the key central lock, the alarm gets armed by the RAV4 being OFF and the door locking action. When you unlock the doors with the key, the alarm is still armed because the key is not comunicating with the alarm just the cars factory keyless system.

Mar 19, 2009 | 2008 Toyota RAV4

1 Answer

1997 Toyota Rav4 doors are locked


over time the grease in the locks etc can become frozen and stop movement when its warmed up a bit it will move better, using the key on the doors every now and then helps move this greas about as the central locking wont move these parts only the switches, replacing the grease after a degreasing locking mechanisms inside the door on the rear of the lock should help choose a grease that can handle low temperatures.

Jun 07, 2017 | 1997 Toyota RAV4

1 Answer

Our 1999 camry remote central locking remote died. Purchased a new one from toyota dealer has had done 3 years earlier. This time the dealer wanted a $35 fee to synchronise the remote so it will operate....


sit on driver seat close all doors
six times open close driver side door fastly and close the door
after that original key in your hand put in ignition switch and six times switch battery on and off during this remote keep in second hand and press lock unlock button and it will work normal

Jul 15, 2008 | Toyota Camry Cars & Trucks

1 Answer

Programming keyless remote


2003-04 Mazda 6 REMOTE PROGRAMMING


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the driver’s door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the driver’s door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) twice. Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!

Good Luck.

Jul 12, 2008 | 2003 Mazda Mazda6

Not finding what you are looking for?
2003 Toyota RAV4 Logo

860 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...