Question about 2000 Toyota Camry
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: timing marks
If u cannot obtain the itming marks, u mite have to time the engine by first pricnciple. Ensure that #1 cylinder is @ TDC (compression stroke). Install the camshaft making sure that the cam lobes for #1 cylinder are on the lower side and not on the tip of the cam. Also when installing the distributor, ensure that it's set to spark @ #1 cylinder. In modern day vehicles, the distributor can only be fitted one way so theree is no need to time the ignition timing via distributor. If this is too much, u can check the crankshaft & camshaft sprocket for distinct timing markings . This should be checked when the components are clean
Posted on Jan 06, 2009
SOURCE: need marks for timimg belt
On the crankshaft gear there is a VERY small dimple that aligns with a mark on the motor. The mark on the motor (a small triangle) is at roughly 11 o'clock. After you line these timing marks up look at the camshaft gear and you will see that on one of the spokes there is a hole. You need to use a mirror to line this hole up with the dimple on the cover that is behind the camshaft gear. (It is at roughly 1 o'clock) If this hole is 180 degrees from where it should be you need to rotate the motor 1 more revolution at the crankshaft and it should now be lined up, or close. Once lined up I like to take a silver (metallic) Sharpie and make my own mark on the camshaft gear and on the backing plate that is behind it. You can make this mark where ever it is convenient for you. As long as you know where your marks line up, that is all that matters. This way I don't have to use the mirror as often.
Posted on May 26, 2009
Hope this helps, it it does please leave feedback and vote Thank You and Good Luck
ET NO.1 CYLINDER TO TDC/COMPRESSION
Posted on Jan 02, 2011
Testimonial: "Have that information. Looking for a diagram to be sure I have it correct. Thank you."
SOURCE: 1990 toyota camry
Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.
Posted on Sep 12, 2008
Tips for a great answer:
May 15, 2016 | Toyota Cars & Trucks
Nov 12, 2011 | 1994 Toyota Camry
May 11, 2010 | 1989 Toyota Camry
Mar 28, 2010 | 1996 Toyota Camry
Feb 17, 2010 | 2000 Toyota Camry
Feb 15, 2010 | 2003 Toyota Camry
Sep 20, 2009 | 1991 Toyota Camry
Aug 30, 2009 | 1998 Toyota Camry
Sep 11, 2008 | 1989 Toyota Camry
3,808 people viewed this question
Usually answered in minutes!