Question about 2000 Chrysler Town & Country

1 Answer

When it shifts it pulls sometimes - 2000 Chrysler Town & Country

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,826 Answers

When it shifts to a higher gear, the transmission can put extra stress on the front end parts making things shift in the ball joints, the tie rod ends, and even the bearings.

I suspect that there are worn parts in your front end causing this intermittent pull.

Have a technician check the front end for loose parts and if there are none, the transmission's differential is the culprit.

Good luck to you fixing this problem.

Posted on Jul 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 350 Honda Rancher, doesn't want to start. Sometimes you can shift to 1st and rock it. Shift to neutral and it will start. Pull it off and it will start sometimes. Any ideas?


i suggest that the starter motor be removed and bench tested or inspected for dry joints on the communitator bars in the armature
check for worn or sticky brushes

Jun 30, 2015 | Honda Cars & Trucks

1 Answer

'92 Metro ****/slips in second and high. Sometimes needs to be manually shifted


Pull the trans & rebuild it

IT SLIPS-why ask-- when it slips

That is internal wear & problems

NO FIX for slipping

Oct 08, 2014 | Cars & Trucks

1 Answer

MY 99 FI50 WONT HIFT IN TO 3R SHIFTS N PULLS FINE FROM 1ST TO 2ND THOUGH


If it wont shift at all, its very likely computer related. Its unlikely it could be vacuum because of its age. Their is a computer for newer trans and sometimes some of the components can fail. I once bought an accord that lost 2nd and 3rd due to its computer, shifted great after i hit the junk yard. If it shifts hard though, solenoids and valve body gasket.

Jul 23, 2012 | Cars & Trucks

1 Answer

I have a 1996 dodge caravan 2.4 litre w/automatic transmission. Sometimes the transmission shifts fine and other times it won't shift at all. If it won't shift I pull over cut the van off and restart it...


This is called limp mode(2nd gear).This means the onboard diagnostics have detected a problem.This could be as simple as a bad speed sensor or could mean a bad transmission.If you have all the gears sometimes most likely there is a bad sensor or solenoid.You will need to have codes pulled and ask the shop to tell you the CVI values.If you get back to me with this information I can tell you what is wrong.

Feb 21, 2011 | 1996 Dodge Caravan

1 Answer

Ford f350 4x4 7.3 powerstroke, lack of power. max out at 20-30mph when pulling hills with or without trailer, doesn't seem to know when to shift, sometimes will shift sometimes not. ?????


check the wiring harness and connectors to the boost sensor, if sensor is not reading the truck drops into safe mode, and drastically decreases engine power. the sensor is located on the intake manifold.

Feb 07, 2011 | 1999 Ford F350 Regular Cab

1 Answer

Hillo my name is victor i have a 2001 concorde and im having troble with tran it is not shifting properly sometime it shift normal and sometime is stay stuck in 1st gear sometime shift to 2nd and stay...


try checking fluid level, could be bad governer, but more likley clutches or bands ,or drums try to go through gears manualy in these newer cars the valve body is all operated by computers,You will probably need to take it to have it pulled and rebuilt, i assume it has over 80k miles

Apr 18, 2010 | 1999 Chrysler Concorde

1 Answer

Gear shift won't move from Park sometimes. It's stuck!


If the car is inclined severly the shifter will be harder to move as more of a load rests on the park gear. You may have to pull it hard but should come out of park. Make sure your foot is firmly on the brake pedal too and the key is in the on position

Dec 10, 2009 | 1994 Volvo 850

1 Answer

Changed transfilter and fluid and now slip shifts and/or shift intermittent error


Sometimes if you have to wrangle the pan off(you didn't remove the cross-member) you will damage the shift solenoids. If you have a check engine light you can get it checked at any Advance Auto store for free. If the codes show shift A and Shift B they are pretty easy to fix,(they are on the bottom of the tranny,you have to pull the pan off again though) If not sometimes the tranny just gets used to the old fluid and acts funny when you put in new, might be time for a rebuild

Jul 23, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

Tranny wont shift into third gear.


you have to pull down the oil pan of the tranny. then take out the strainer inside attached to the tranny. dirt is clogging it making the sometimes shift and other not.

Apr 22, 2009 | 1984 Nissan Maxima

1 Answer

I have a problem with shifting


are you rob x diesel....cuz he cant shift either???? if you need help with transmissions try this guy hes really good. http://tinyurl.com/d3p32m

Mar 26, 2009 | 1999 Ford Taurus

Not finding what you are looking for?
2000 Chrysler Town & Country Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...