Question about 1994 Chevrolet S-10

Open Question

Loss of power in 4.3 v6 engine 94 S-10 Chevrolet 1994

Loss of power in 4.3 v6 engine 94 S-10 Chevrolet, does pretty good when cold , but looses power as it gets warmed up .

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MNfisherman
  • 11896 Answers

SOURCE: My 1987 Chevrolet Z24 Cavalier cooling fan will

since you have already tested fan and relay and both work, the problem may be the engine temp sensor. There are two sensors. One goes to instument cluster. This is engine coolant temp sensor, the other is engine temp sensor which is usually attached to engine block, sometimes they are connected to thermostat housing with the coolant sensor. You can pully the engine temp sensor and test that sensor same way as relay. (with mulitimeter)

Posted on Jun 03, 2009

  • 4 Answers

SOURCE: runs great cold after warms up 20 min or so looses all power

try having the catalatic converter on the exaust tested it might be clogged

Posted on Aug 11, 2009

hardinfarms
  • 144 Answers

SOURCE: i need a wiring diagram for a 1994 chevrolet s-10

I need to know which wiring diagram you need, powertrain, exterior lighting, engine management?

Posted on Oct 04, 2009

demonsm
  • 253 Answers

SOURCE: engine noise when cold but goes away when warmed up

That is oil not getting in the motor. go with a light high mileage oil my want to use some marvel mystery oil to keep the walls slick.

Posted on Dec 04, 2009

  • 7353 Answers

SOURCE: How to pull the EGR Valve off of a 1994 Chevrolet

it should just bolt on with 2 bolts.

Posted on Sep 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How many Coil Packs should I get if I was to replace them?


Your car could have a 4 cylinder or a v6. If your car is a early "94" it cold have a distributor on both engines. If it has a distributor, ether engine will only need one coil. BUT If your car has a coil pack not a distributor, it will need,, if a 4 cylinder,, 2 coils, if a v6 it will take 3 coils. .

Sep 25, 2011 | 1994 Chevrolet Corsica

2 Answers

How are firing order for cavalier 1994 V6 2.8L? Thank You


2006-03-05_165213_4f37.jpg
2.8L Engine - Engine firing order: 1-2-3-4-5-6 Distributor Rotation: Clockwise

Jan 21, 2010 | 1994 Chevrolet Cavalier

1 Answer

My 3.4 v6 95 camaro has a weak crank, but will start, has been doing this for about 4 weeks. lights turn on, gauges turn on. please help, dont want to be left stranded. i also have a service engine light...


Check your battery connections if they are good then your battery has probably gone bad the loss of power to your computer will cause the check engine light to come on

Oct 20, 2009 | 1995 Chevrolet Camaro

1 Answer

Runs great cold after warms up 20 min or so looses all power


try having the catalatic converter on the exaust tested it might be clogged

Aug 11, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

I have a 1994 Jeep Cherokee, V6. It idles rough and It has power loss when I hit the gas. It eventually gets going but studers.


When was the last time this engine had a tune-up? Is the check engine light on? If so, reading the codes will get you looking in the right places. It sounds like it is missing badly.

Jul 19, 2009 | 1994 Jeep Grand Cherokee

1 Answer

I need an engine diagram 1994 firebird 3.4 v6


Sounds like some sort of exhaust limiter for hot and cold engine running mode. It needs to be re-attached or replaced.

Jun 08, 2009 | 1994 Pontiac Firebird

1 Answer

My 1987 Chevrolet Z24 Cavalier cooling fan will


since you have already tested fan and relay and both work, the problem may be the engine temp sensor. There are two sensors. One goes to instument cluster. This is engine coolant temp sensor, the other is engine temp sensor which is usually attached to engine block, sometimes they are connected to thermostat housing with the coolant sensor. You can pully the engine temp sensor and test that sensor same way as relay. (with mulitimeter)

Jun 03, 2009 | 1987 Chevrolet Cavalier 4 Door

1 Answer

1994 Chevy S-10 V6 Vortec engine 4X4 Changing flywheel


separate the trans from the transfer case
and unbolt the torque converter.
the the bell housing bolts

Jan 02, 2009 | 1994 Chevrolet S-10

3 Answers

Distributor cap firing order 1993 chevy cheyenne truck v6


Firing order is 1-6-5-4-3-2 cyls. # 1-3-5 on drivers side front to back and cyls. # 2-4-6 passenger side front to back.

Nov 28, 2008 | 1989 Chevrolet C1500

Not finding what you are looking for?
1994 Chevrolet S-10 Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...