Question about 2002 Ford Escort
2002 ford escort Zx2 soft clutch pedal. pedal will stick on the floor.if you pull the pedal up from the floor the clutch works somewhat ok. but when shifted into reverse to back up the clutch pedal was engaged but the car kept pulling backwards. what seems to be the problem? also no leaks at the clutch master cyclinder or at the slave cyclinder.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Either you have to pull off the old clutch assembly(Master, slave cylinders, reservoir and the line),since its a factory sealed unit and replace with a new one or one from another vehicle, or , see if a parts store has the new ones out. The slave cylinder is the one with the bleeder valve.
Posted on Jun 05, 2008
pull your rear drums and inspect the shoes,you may have too addjust them out by hand too get the peddle you want
Posted on Mar 15, 2009
remove the battery and the battery tray,the fluid line and the two bolts that hold on the clutch master and remove.you may need to bleed the new one at the slave cylinder by having someone depress the pedal and letting the air out and tighten the line again before they release the pedal,but i think by pushing the pedal up and down a few times it will be ok. if the shifter wont go into gear or the car starts to move when only slightly moving the pedal of the floor then bleed it.
Posted on Feb 20, 2010
Tips for a great answer:
Mar 18, 2017 | 1999 Ford Escort
Dec 21, 2015 | Ford Cars & Trucks
May 24, 2015 | 2002 Ford Escort
Mar 29, 2014 | 1999 Ford Escort
Dec 30, 2013 | 2001 Ford Escort ZX2
Sep 01, 2011 | Ford Escort Cars & Trucks
Aug 08, 2011 | 2002 Ford ZX2
Feb 22, 2011 | 2001 Ford Escort ZX2
Apr 18, 2010 | 2003 Ford ZX2
Apr 07, 2009 | 2002 Ford ZX2
320 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: