Question about 2006 Chrysler Town & Country

1 Answer

Where is the engine air filter located in a 2006 Town & Country? Do I need a special tool to open the filter cover?

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The air filter is very easy to be located somtimes there is diagram and it tell your were certain things are located, and to open the air filter cover you dont need a special tool. some you can use a screwdriver or some just clips that u can unclip and it will come right off.

Posted on Jul 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the Crankshaft Position Sensor location on a Town and Country with the 3.6L V6 engine?


The role of the crankshaft position sensor is to determine the position of the crankshaft, the crankshaft angle. It is usually with a camshaft position sensor work together - to determine the basic ignition timing. Car Diagnostic Tool

Aug 27, 2016 | 2011 Chrysler Town and Country

1 Answer

Where is the internal fuse box on the 2006 Chrysler Town & Country?


You will find it beside the battery in the engine compartment. Black plastic cover.

Aug 18, 2014 | 2006 Chrysler Town & Country

1 Answer

Where is ambiant air temp on 2006 town and country3.3


TEMP SENSOR IS LOCATED BEHIND FRONT BUMPER COVER CLOSE TO AC CONDENSOR. CABIN FILTER SHOULD BE UNDER COWL PANEL ON PASSENGER SIDE

Feb 11, 2014 | 2006 Chrysler Town & Country

1 Answer

Location of oil filter in Skoda Octavia 2006 1.9 diesel


Octavia (a4 ) remove top engine cover the engine oil filter is at front cover, big black plastic cover remove with special tool the oil filter can be remove and replace with plastic ring

Nov 21, 2013 | 2006 Skoda Octavia 1.9

1 Answer

2006 chryslter town and country cabin air filter replacement


Simple, the cover just slides to one end and falls off, it will only go one way, slide it about a inch and a half or so and it will come off, no clips, just slide it..

Jun 10, 2012 | Cars & Trucks

1 Answer

Where is the air filter located on a 1996 chrysler town and country?


As you stand in front of the car with the hood open you will see a black box on the drivers side front of the engine near the battery, held in place with two bolts, a 10mm socket will work to remove them. There will also be a hose coming from the front valve cover you can remove that from the box. Loosen the clamp holding the air tub to the throttle body and the clamp holding the air tube to the air filter housing u under the black box. An 8mm or 5/16 socket and a short extension will work for these. Remove the black box. The air filter box cover is held on by two snap style retainers. Pop those loose and remove the air filter housing cover. The air filter will be underneath.

Aug 09, 2011 | 1996 Chrysler Town & Country

1 Answer

Cabin Air Filter replacement. Where is it located on a 2006 Chrysler Town and Country?


there is a panel just above passengers feet, take panel off and filter should slide out (down) you will see how panel is attached (no bolts)

Aug 03, 2011 | 2006 Chrysler Town & Country

1 Answer

2006 Chrysler town & country 3.8 engine looses power under load. engine idles O K ,seams like fuel problem?


Thanks for choosing FixYa and welcome to the site. You should try testing the fuel pressure to know for sure if it is a fuel issue. You need the tool to test the pressure, but the service port is on the engine, on the fuel rail. It almost looks like a tire valve. You could have a clogged fuel filter. It is recommended to change it every 30,000 miles. If you haven't had a tune up in a long time, get that done. Change your spark plugs/coils, wires, dist.cap, coil packs. Make sure you do not have a vacuum leak also. Check your air filter and make sure it is not clogged. If you have a check engine light on, take it to Autozone and have it scanned for codes. They do it for free and it could lead you to your answer. This is your best bet so your not throwing money and time out on parts you don't need.

Apr 24, 2011 | 2006 Chrysler Town & Country

2 Answers

2006 chrysler town & country 3.8


Check under the panel where the wiper arms are, between the hood and the windshield. Unbolt/screw it and it should be on the pass. side.

Aug 09, 2008 | 2006 Chrysler Town & Country

Not finding what you are looking for?
2006 Chrysler Town & Country Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...