Question about 2000 Dodge Durango

1 Answer

Need to replace the power steering pump on a 2000 dodge durango. Need to find out how to see if it is a 17mm or 18mm pully on the pump.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Dodge Master
  • 1,075 Answers

Why dont you measure it???its stuck at the front of your engine.adrian,,,,

Posted on Jul 08, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a 2000 dodge caravan 3.0 engine there a sqeak noise when i first crank the motor up until it warms up i replaced the idler pully 6 months ago but it still sqeaks i can move the tensioner pully a...

I can't say for sure but it could be the tensioner pully. I don't think you should be able to move it side to side. That would indicate that the bearing is worn.

Nov 03, 2017 | 2000 Dodge Caravan

1 Answer

How do you take pully off a power steering pump on a dodge durango 2001

There is a special tool made for this operation. I got mine at Harbor Freight. here is a picture of it:


Dec 25, 2010 | 2000 Dodge Durango

1 Answer

What kind of tool do you need to get the pulley off a power steering pump on a 2000 dodge durango?

you can go to advance auto parts or autozone to borrow a power steering pump pulley puller.

Feb 28, 2010 | 2000 Dodge Durango

1 Answer

How do i take out a power steering pump

there is a bolt behind the pump that needs to be taken out you can't see it and you don't know it's there till you try pulling it out, on some units you have to remove the pully to get to the bolt, I think it's a 17MM or 15MM not sure.

May 30, 2009 | 2000 Dodge Caravan

1 Answer

Power Steering Pump

you need an 18mm crows foot wrench 12" 3/8 extention N ratchet N 10mm socket. remove the belt, use crows foot to remove the pressure line, remove other tubes, remove 4 10mm bolts and pluck the pump out, go to autozone or some large chain auto parts store and buy a pully remover/installer use it then bring it back,( they have a loaner program) without the puller you will never get the pully off.

Apr 11, 2009 | 2000 Ford Windstar

1 Answer

Steering hard

this is going to be a power steering pump or rack, i would replace the pump, but it will be one or the other sorry no simple fix let me know what happens thanks

Jan 15, 2009 | 2000 Dodge Durango

1 Answer

Surpentine belt.

depends on which v8 you have....the 4.7 the routing is as follows it goes under the waterpump pully over the alternator down and around the power steering pumpto the goes under the bottom of the crank to the idler pully.the flat side of the belt goes ver the idler then around the automatic tensioner to the ac compressor.
on the 5.2 and 5.9 it routes starting at the idler pully the flat side goes undr the idler the up to the ac compressor around the compressor and down to the power steering pump ... around power stering pump to waterpump where the flat side is against waterpump pully around water pump down and around crank up it automatic tensioner....around tensioner and up and over alternator

Nov 30, 2008 | 2000 Dodge Durango

1 Answer

Power steering pump 1500 3.9 p/u

You'll need a power steering pulley puller available from many different tool manufacturers.

Oct 18, 2008 | 2002 Dodge Ram Maxi

1 Answer

2000 Dodge Durango bad steering pully cable and pump

Unless the tow truck operator hooked up to the wrong thing the tow will have nothing to do with it.

I have never heard of any connection to the transmission and power steering, so the chances of the transmission repair causing the p/s failure is pretty low.

Is the repair shop reputible? I would recommend a second opinion from another shop.

Jul 24, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
2000 Dodge Durango Logo

Related Topics:

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides