Question about Cars & Trucks

Open Question

Hey ive got a 96 model ford courier petrol 2.6 ltr need to adjust the rockers need to now the clearance measurement's

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
snownbird33
  • 120 Answers

SOURCE: Holden 94 rodeo petrol

Good Day
Vale clearance cold
intake .006 in (.15 mm)
exhaust .010 in (.25 mm)

Timing
1. With transmission in Neutral or park, start engine and warm to normal operating temp. turn eng,and all accessories off. connect Tachometer. Connect timing light to no 1 spark plug wire.

2. Disconnect and plug fuel vapor canister purge hose and EGR vacuum hose. Start and ensure idle is 900 RPM. adjust idle as required. Check ignition timing ( 12 @ 900)

3. If adjustment is required, loosen distributor hold down bolt and turn until timing is within specification. Tighten distributor hold down bolt and recheck timing. adjust idle speed as required.

hope this helps

Cheers

Posted on Sep 30, 2008

Ad
  • 54 Answers

SOURCE: Need Valve clearance for '93 kh ford laser

0.10 - 0.15mm inlet
0.18 - 0.23mm exhaust
but you must be carefull because the top of the valve seat becomes concave from wear, a feeler guage will not give the most accurate reading, hope i have been of some hel

Posted on May 14, 2009

moparownr
  • 667 Answers

SOURCE: 96 escort valve clearance

Gary, the 1.9L Ford engine has hydraulic lifters no valve adjustment is needed

Posted on May 18, 2009

jimboz4
  • 305 Answers

SOURCE: how do i adjust the alternator on my 1990

there are 2 nuts at the top, 1 is a lock nut, the other is an adjusting nut, slacken off the lock nut, then turn the adjusting nut, left to tighten, and right to slacken

Posted on Jul 22, 2009

01fordeb
  • 1033 Answers

SOURCE: how to check valve to rocker arm clearance on 253 Holden V8

feeler gauges work good.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Valve clearance for a Ford Everest 2011


There isn't one persay. The caps are torqued at around 45 inch pounds. If you have lifter noise, then you have to look at other things. Collapsed lifters, worn our push rods, Worn out rocker arms, worn out cam shafts. Lots to look at and measure.

Aug 10, 2016 | Ford Cars & Trucks

1 Answer

How to agust tappets on a 250 pre cross flow ford 6


If you have hydraulic lifters(tappets) then you turn the adjusting screw 1/4 turn past the point where there is no noise from the rocker arm. If you have solid lifters, then you'll have to get the cold clearance spec for that engine and adjust accordingly.

Dec 13, 2014 | Ford Cars & Trucks

2 Answers

What is the valve clearance for my 1990 courier 2.5 litre diesel ?


if it does not have hydraulic adjusters then .012" inlet hot and .014" exhaust hot. If it has hydraulic adjusters then the noise will be from worn rocker shafts and rocker bushes.

Sep 10, 2014 | Cars & Trucks

1 Answer

Isuzu kb 320 v6 noisey rockers


ill look up the specs to see if they are adjustable valve clearance like the 4 cyl petrol engine. if they are adjustable ill give you the clearances recommended if they happen to be hydraulic the best bet is a engine oil and filter change and with any luck that alone will help it out some what. may also be a idea with the engine running remove the oil filler cap and see visually that there is ample oil being splashed around rockers and cam shaft etc. hope to be able to help you with your problem

Mar 09, 2014 | 1994 Isuzu Pickup

1 Answer

Valve clearance adjustment


Hi I am looking for the valve clearens of a Toyota Quantum 8 valve Petrol 2RZ

Thank You

Jan 01, 2014 | Ford Cars & Trucks

1 Answer

96 escort valve clearance


Gary, the 1.9L Ford engine has hydraulic lifters no valve adjustment is needed

May 18, 2009 | 1989 Ford Escort

1 Answer

Tappet settings for 1997 1300 ford fiesta


the inlet clearances are 0.20mm
the exhaust clearances are 0.30mm up to 20/11/96
or 0.50 after that date
there will be a sticker on the rocker cover if the engine is a newer type as you never know if it is the origional engine or not.
I hope this helps

Apr 30, 2009 | Ford F Cars & Trucks

1 Answer

I would like to know the factory ground clearance for my 96 olds model 98. Thanks Art


hi art , i think they are going to call it ride height in the alignment specs . front ride height would be 9.0" - 9.8" and that point of measurement would be taken at the rocker panel 23.5" back from the center of the front axel (center of tire) to the bottom of the rocker panel .and the rear height would be 9.05" - 9.85" , and that point of measurement would be 23.5" from the center of the rear axel forward to the bottom of the rocker panel .see pic
4b869e6.jpg
4f228d0.jpg
J5

Jan 20, 2009 | 1996 Oldsmobile Ninety Eight

1 Answer

Holden 94 rodeo petrol


Good Day
Vale clearance cold
intake .006 in (.15 mm)
exhaust .010 in (.25 mm)

Timing
1. With transmission in Neutral or park, start engine and warm to normal operating temp. turn eng,and all accessories off. connect Tachometer. Connect timing light to no 1 spark plug wire.

2. Disconnect and plug fuel vapor canister purge hose and EGR vacuum hose. Start and ensure idle is 900 RPM. adjust idle as required. Check ignition timing ( 12 @ 900)

3. If adjustment is required, loosen distributor hold down bolt and turn until timing is within specification. Tighten distributor hold down bolt and recheck timing. adjust idle speed as required.

hope this helps

Cheers

Aug 18, 2008 | 1994 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...