Question about 1966 Ford Mustang

3 Answers

My rear quarter window slides freely up and down

My rear quarter window on my 66 mustang coupe slides freely up and down and wont respond at all to the turnknob how can i fix this?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

The window regulator is in need of inspection or replacement. the gear on the knob assembly is not contacting the window gear, therefor it will not operate the window from the knob while cranking.

Posted on Jul 07, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My 68 mustang cp the rear quarter window is very hard to go up and down so O put a new regulator in it and it'd still very hard what to do what's wrong

Posted on Feb 17, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Take out the rear seat and the rear window knob and inside quarter panle. then there should be little plastic sliderds the sit in a rail. i think that the slider came ot of the rail. i had the same problem. Joe

Posted on Jul 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger raer marker light is out




The rear light assembly is one unit that slides into the rear fender housing. If you pull back the carpet on the rear quarter panel you will see a piece of the sliding lock that holds the light unit in place. The lock has a tang sticking out of the housing. Pressing down on this will cause the lock to start to release and the light unit will slide out about a 1/4 of an inch. Gently pull out on the light while continuing to press sown on the lock tang until the unit slides out. Replace the blown bulb. Install is reverse of removal. Warning: The tang on the lock is plastic as is the lock itself and can be easily broken. Also, installing the light unit can be tricky to get lined up correctly. My advise is to spay the inside of the housing with silicone spray liberally before reinstalling the light unit. The lubrication usually helps the sliding lock operate correctly and lessens the chance of breakage.

Nov 13, 2013 | 2007 Volkswagen New Beetle Coupe

1 Answer

How to remove a rear quarter window, that's not a


You have to remove the Rear Panel, then the Window is bolted to teh Manual Window Regulator, Unbold and then pull out at an angle through the SLot

Apr 10, 2013 | Cars & Trucks

1 Answer

I need help .!!! How do you remove a rear quarter window for a 98 Chrysler Sebring coup


you have to remove the Inside Quarter Panel to gain access to the Windown Regulator, Once you get there, Unbolt the Window and it comes out

Apr 10, 2013 | Cars & Trucks

1 Answer

My 68 cp quarter window is very hard to go up or down replaced the regular and it's still hard


check the alignment of the window guides and lubricate with white lithium grease on the guides and runners should work fine.

Feb 17, 2013 | 1966 Ford Mustang

1 Answer

My right passengers side rear quarter back window fuse


right side trunk speaker Or Left Side Trunk Speaker There Is A Wire Harness For The Back

Apr 13, 2017 | 1998 Toyota Celica

2 Answers

66 mustang help


Remove the steering wheel and replace the directional switch

May 31, 2010 | 1966 Ford Mustang

1 Answer

How do the rear quarter panel windows come off a 91 mustang GT


You have to pull the inside trim off to get access to the nuts that hold the 1/4 glass in place.

I better way of attacking your problem is to tape off the molding and paint it still attached to the car. I have done this several times with very good results.

Feb 26, 2010 | 1991 Ford Mustang

1 Answer

Headliner install in 66 mustang coupe


Remove windshield and rear window to do it properly. Headliner is actually crimped in between window gaskets and roof edge. Not a job for the faint at heart. If you don't know the string trick to get your gaskets in place you'll be working on it this time next year. Look on CJ Pony parts web site. They used to have a good tech article on headliner replacement. Hope this helps...

Feb 22, 2010 | 1966 Ford Mustang

1 Answer

How do you install 1965 mustang quarter panel


Remove rear seat and interior side panels. You'll see nuts on the posts for the trim pieces.

Oct 13, 2009 | 1965 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...