Question about 2007 Dodge Ram Truck

2 Answers

2007 dodge ram 5.7L cant get the fault codes

I have a 2007 dodge ram 5.7L and I cannot retrieve the fault codes using the iginition on/off three times method, is there any other way to get the codes without a scanner?

Posted by on

  • Ronnie Rowell Jan 14, 2012

    hold trip set button and turn on ign. codes should read 3 times in odom. window

  • Danny Donohue Jan 18, 2012

    Thanks I have since fixed the truck but tried your suggestion and im getting some numbers but they dont seem to make sense they are not P0 numbers instead I got three different numbers they were 44/338/543 it cycled through those numbers three times and that was it are these codes or do they have other meaning? Thanks again for your input I have been wondering when I would get some way to get the codes without the scanner:)



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers


AutoZone and other autopart stores will scan the trouble codes and give you a print out with the TC number and their meaning. This is a free service they offer to their customers.

Don't forget to rate this post. Good Luck!!!

Posted on Jul 07, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Push trip set button and hold while turning on ign. switch,codes should read out on odom.

Posted on Jan 14, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dodge ram won't start and ECM light and check

First you need to retrieve the trouble codes stored in the computer.If you don't have a code reader or scan tool you can take it to your local autoparts store (advance auto,autozone,ect) and they can retrieve them for you.Then we can go from there.

Jan 12, 2012 | 2007 Dodge Ram Truck

1 Answer

Sluggish starting dodge

"Sluggish" starting is the first sign of a shorted battery cell. If your battery is original, it is time to replace it.
If you are certain that the battery is in good condition (meaning it has been thoroughly tested) then it may be time for a tune- up.
Otherwise, I would recommend scanning your computer network for possible fault codes and diagnosing accordingly.

Sep 16, 2011 | 2007 Dodge Ram 2500 Mega Cab Laramie

1 Answer

How do you check the engine code on an 2007 dodge ram megacab 2500

1.Get in the truck and close the door.
2.Turn the iginition key on and off quickly 3 times without starting it

3.Watch as the odometer numbers disappear and the error codes will show up.

4.When its done it'll say "done" and your mileage will return.

May 26, 2011 | 2007 Dodge Ram 2500 Mega Cab Laramie

1 Answer

How can I find a fault code on my 2005 dodge ram 1500 using the check engine light?

you cant check codes on that year truck without a code reader. ive seen them as cheap as 30 dollars at kragens and harbor frieght has code puller/scanners for around 100 dollars. all you have to look for on the box is OBDII

Apr 03, 2010 | 2005 Dodge Ram 1500

2 Answers

2007 dodge 3500, 5.9 cummins,engine light on, fault code p2146, running rough

It's a code that signify's you have a voltage circuit problem with one or more fuel injectors. When a problem is found with the fuel injector circuit it affects fuel delivery on all the injectors and that is why it is running rough.

Good Luck

Jan 29, 2010 | 2007 Dodge Ram 3500 Quad Cab Laramie

2 Answers

I have a ram 1500 hemi every time i put my foot on brakes

Several cars that I know of are set up to beep when the ABS controller is failing or has failed. Have your computer scanned for fault codes - it's very possible that there are brake-related fault codes stored in there that have not tripped the check-engine light. They'll help you determine what needs to be replaced.

If you do end up needing a rebuild on the module, I'd highly recommend - on the Audi forums that I frequent, they're held in very high regard for fast service, good pricing, and warrantied, quality work.

Dec 04, 2009 | 2007 Dodge Ram Truck

2 Answers

How do i check for fault code using key method on a 1999 dodge diesel 2500

i dont thing you can on that but it has a obd2 in it witch most auto parts store will check for free i know for sure autozone does all cars 96 and later are obd2

Aug 15, 2009 | 1999 Dodge Ram 2500 4WD

1 Answer

Check engine light on code p0441 dodge ram 1500 my 2007 dodge ram 1500 is puttering and acting like it wants to die out can you let me know what the problem is.

This trouble code is Evap Purge System Performance fault. 1) Check for a loose or missing fuel cap. 2) Check for a damaged or missing fuel cap seal. Recheck for other trouble codes. This fault wont cause the stumblering problem. It turns on the MIL lamp to say there leak in the EVAP system.

May 10, 2009 | 2007 Dodge Ram Truck

Not finding what you are looking for?
2007 Dodge Ram Truck Logo

Related Topics:

803 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides