Question about 1990 Mitsubishi Montero

1 Answer

Fuel pump won't run (no power to pump when ignition is on), battery check in car registers a trouble warning, check engine lite stays on. Think it could be "engine control relay" but can't locate a replacement. Also having trouble locating device on vehicle. Have found 3 relay boxes, all in same location on passengers side behind glovebox. A 6 wire conn. with 2 grounds, and two other boxes with 5 wire conn's. Have an after market manual, but not alot of help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 518 Answers

No feed so check fuse,

Posted on Jul 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to head lites cab lite fuel pump or igmition switch new starter start relay battery @13.04 volts


After you check all fuse & relays look under the dash & engine for melted wire harness.

Sep 14, 2015 | 1988 Ford F 150

1 Answer

97 dodge fuel pump


The pump will only run for 1 second unless the engine is either being cranked or is started and running.

May 02, 2014 | Dodge Pickup Cars & Trucks

1 Answer

I have a 2000 chevy malibu drove it for a few days then the other day went to start it turned the key no dash lights like the battery or any of the others that usually come on the mileage dont come on...


Did you check all the fuses under the hood? That's where the ignition fuses would be. The same "run" wire to the ignition coils, when the key is in on or run, or the same set of run wires out of the ignition switch both to the dash warning lights and gauges, and to the ignition system on the engine, well they're all the same power source, and more so the computer gets power from the ignition switch being on as exhibited by the check engine light turning on when key is turned to on.
It sounds like the ignition switch is either not getting full power in, or it's not sending power out as it should.
Check your other battery power-do you have headlights? That would be entirely separate from the ignition switch, but it verifies that battery power is getting to the fuse and relay block under the hood. Is the cranking speed normal? not too slow?

Mar 04, 2014 | Chevrolet Malibu Cars & Trucks

1 Answer

Car won' start, battery is ok, antifreeze is low but not out could this be the problem?


No. it wouldn't keep it from starting. If the engine cranks but won't start, probably gas or spark (ignition) related. Do you hear the fuel pump in the tank turn on for a couple of seconds, when turning key to on, not start? If you cannot hear the pump, better check if you are getting gas up to the engine. Maybe the fuel pump quit, or the pump circuit needs looked at. The pump should briefly turn on with key on to pressurize the fuel system-the fuel line and the fuel rail where the injectors are. Then the pump will turn off, and only come back on again when the engine is cranking, and stay on when running.
Correct fuel pressure is important for easy starting, and good engine performance. Have the fuel pressure checked against the specification for your vehicle. If fuel pressure is good, check the ignition system-check for spark.

Dec 31, 2013 | Cars & Trucks

2 Answers

1996 3.8l firebird stalling


check alternator,check battery connection,fuel filter,air filter,check coils and module,spark plugs,last thing crankshaft sensor.

Feb 12, 2013 | 1996 Pontiac Firebird

2 Answers

I changed the oil in my 98 concorde and now it wont start. The oil light is on but not the check engine light.\


do you here the fuel pump working when you turn the key?If not could be a fuse that runs the fuel pump.

Aug 05, 2012 | 1998 Chrysler Concorde

1 Answer

I have 2004 Chevy Malibu classic, it acts like it wanna crank but won't. it will turn over but won't stay cranked up.


You'll have to figure out if it is a fuel or ignition problem.
Is the check engine light on ? Have you checked for trouble codes ?
It could be a relay, the ignition module, coil, fuel pump, or a list of other things.

Jul 04, 2012 | Cars & Trucks

1 Answer

Chevy Silverado 2002 2500 shows trouble code, P0230, and P0300


P0230 - Fuel Pump Primary Circuit Malfunction Symptoms - Engine Light ON (or Service Engine Soon Warning Light) Possible causes - Blown Fuel Pump fuse
- Open Fuel Pump Monitor Circuit
- Faulty Fuel Pump Relay
- Damaged ECM. P0230 Description The Engine Control Module (ECM) provides ignition positive voltage to the coil side of the fuel pump relay. When the ignition switch is first turned ON, the ECM energizes the fuel pump relay, which applies power to the fuel pump. The ECM enables the fuel pump relay as long as the engine is cranking or running, and crankshaft reference pulses are received. If no crankshaft reference pulses are received, the ECM de-energizes the fuel pump relay after 2 seconds. The ECM monitors the voltage on the fuel pump relay control circuit.
Please go to this LINK for P0300 diagnosis.

Feb 16, 2012 | Cars & Trucks

1 Answer

Not getting fire over the #1 spark plug coil. What needs to be changed/what is the cause of the problem? The engine stopped running while in motion. Battery light came on first then all the other warning...


  1. Check fuel level in fuel tank, add fuel if empty.
  2. Check battery condition and state of charge. If voltage and load test below specification, charge or replace battery.
  3. Check battery terminal and cable condition and tightness. Clean terminals and replace damaged, worn or corroded cables.
  4. Check fuel delivery system. If fuel is not reaching the fuel injectors, check for a loose electrical connector or defective fuse, relay or fuel pump and replace as necessary.
  5. Engine may have excessive wear or mechanical damage such as low cylinder cranking pressure, a broken camshaft drive system, insufficient valve clearance or bent valves.
  6. Check for fuel contamination such as water in the fuel. During winter months, the water may freeze and cause a fuel restriction. Adding a fuel additive may help, however the fuel system may require draining and purging with fresh fuel.
  7. Check for ignition system failure. Check for loose or shorted wires or damaged ignition system components. Check the spark plugs for excessive wear or incorrect electrode gap. If the problem is worse in wet weather, check for shorts between the spark plugs and the ignition coils.
  8. Check the engine management system for a failed sensor or control module.

May 21, 2011 | 2000 Mitsubishi Galant

Not finding what you are looking for?
1990 Mitsubishi Montero Logo

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...