Question about 2003 Honda Odyssey

1 Answer

Cruise control stopped working at about 70k. Enable light at switch comes on, but will not set a cruise speed (dash light will not turn on). I've not begun to inspect, but have read many problems about brake switch interaction. Any other common problems you've seen relative to preventing engagement of cruise control?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check for a broken plastic piece under the hood on the throttle control. Top, Back right of the engine. Probably will see the cruse control cable sitting there disconnected.

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Japanese honda accord cruise control dash switch light comes on, but set/acc switch will not set


problems with cruise control include , clutch switch, brake switch , low road speed , control module , speedo sender unit
make sure that all those items are adjusted as one one will stop the cruise control from engaging

Jun 06, 2016 | 1995 Honda Accord

4 Answers

2005 Chevy trailblazer ext problems 1. Cruise will not set.worked last on 4/12/15 2. While checking fuses for CC problemdome lights stopped working, but worked fine before checking fuses. PLEASE HELP!


Bummer deal! This may be a way to tell you some tail lights are burnt out. Some cruise controls have a fuse in a second location.
The fuse is not in right or is blown. Check with a new fuse. Hope this helps. ...gc http://www.auto-tune-up-and-repair-options.com/

Apr 20, 2015 | 2005 Chevrolet Trailblazer Ext

1 Answer

Cruise control indication appear but not enabled


There's a recall for the cruise control deactivation switch. This could be your problem. Contact yo

Feb 22, 2014 | 2002 Mercury Mountaineer

1 Answer

2003 oldsmobile alero v6 -- cruise control stopped working...The cruise on/of button lights up, the green light cruise indicator comes on in the dash panel, but cruise control does not engage when CST SET...


Try checking the small switch at the top of the brake pedal. There may be two one for brake lights and one for the cruise control. To ascertain what is what, pull one wire off and see if brake lights work. If not, then the other switch controls the cruise control disconnect and engage..I you have a DC test light check to see if power is on on both side of the switch with brake pedal up. If so, depress pedal and check power on the other side there should be none, if there is the switch is defective.

Aug 02, 2017 | Cars & Trucks

1 Answer

Cruise control only works sometimes


are you going uphill in overdrive gear . If the speed is lower than you set the crruise control might disengage. ?

May 31, 2017 | 1996 Nissan Sentra

1 Answer

How can i activate my cruise control in my 2004 grand cherokee


The cruise control switches are located on the steering wheel. When the cruise control is turned on there will be a green light luminated on the dash that says "cruise". When at the desired speed press "set" to set the cruise control at that speed.

Oct 09, 2010 | Jeep Cherokee Cars & Trucks

1 Answer

My Cruise Control Wont work, is there a special way to turn on the cruise, because the sign for cruise comes up but it doesnt cruise


First, your car must be in gear and driving approx more than 60 km an hour
Secondly, using the Cruise Stalk switch turn the Cruise on, the dash should now have a lit icon for cruise power (green).
Once you have the desired speed, gently press the button on the end of the cruise in to set your speed. Remove foot from throttle and confirm cruise is active. Another dash light should come on as well (orange)

Failing that, if it doesnt work the usual suspect like fuses and the brake pedal micro switch should be looked at...

Aug 08, 2009 | 2007 Toyota RAV4

1 Answer

In 1998 2wd Grand Cherokee cruise control stopped working


Do the brake lights work now, as they should? The brake light switch generally triggers the cruise control to snooze.

Aug 04, 2009 | 1998 Jeep Cherokee

3 Answers

"Cruise" on a 5-speed '00 Hyundai Elantra


I have this same car. The place you set speed control is on the windshield wiper switch on the right side of the steering column. The button with the indicator light has to be pushed in order to use the cruise control but just because the indicator light is on, it does not mean the cruise is on. Hope this helps a little. If you need more info and someone else doesn't answer more eloquently.. I'll check back and try to give you more info. :-)

Apr 09, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
2003 Honda Odyssey Logo

911 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...