Question about 2001 Chevrolet Blazer

1 Answer

My 2001 blazer 4wd does not want to start. could it be the fuel relay switch? It has a new starter,fuel pump,oc2, spark plugs and fuel injectors, ...problem is i turn the key and i hear the engine trying to connect but it does not. took it to repair shop he has put machines up to it without result to the cause. He tells me the fuel pump has a low pressure of 50 instead of the 60 something like that but he not guarantee that can fix the problem...help me get my car started-please.

Posted by on

  • Richard Scordino Jul 07, 2010

    No one can answer your question with any accuracy. I have no idea what you mean by that you "hear the engine trying to connect"???? If the engine does not turn when you turn the key, fuel pressure has nothing at all to do with that. (should run at lower pressure) Your engine needs fuel air and spark as well as a way out (unobstructed) for the exhaust. Spark needs to happen at the correct time and only go to the intended cylinder. You need to check everything item by item, using a chilton or haynes manual for a guide.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 42 Answers

The first thing I do is spray ether in mass air flow manifold and see if it starts. If it starts with ether I know I have a fuel delivery problem. The PCM providing less than 12 volts to the fuel pump results in low discharge pressure. You could also have a bad pressure regulator or a clogged fuel filter.

Posted on Jun 03, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

3dmaster
  • 183 Answers

SOURCE: 2001 chevy blazer won't start

If your car having time more than 3 years in regular office work than it may happens to fual pumps,

cause somtime fual pups having prob in different temperature variation,

so,try to check your pump install in same model others car for testing than you can find your pob,exactly..


THNX

Posted on May 16, 2008

  • 220 Answers

SOURCE: fuel pressure problem.I replaced the fuel pump on 2001 chevy s-10

Most fuel injected vehicles have a relay that controls the fuel pump so after the ignition switch has been on for about 5 seconds and the engine is not running, the fuel pump automatically shuts off.
I don't know what your original problem was, but I think if the car runs normally, you have probably fixed your problem. If you don't have a manual, you can probably go to the library and take a look at a manual that covers your vehicle.

Posted on Jan 16, 2009

blueextc3221
  • 15935 Answers

SOURCE: 2001 Chevy Malibu, 89,000 miles, 3.1 engine, won't start

CLICK HERE for the injector schematic.
CLICK HERE for the Ignition schematic.

Since the PCM uses info gatheres from the crank and cam sensors to calculate ignition - and there are no OBD codes - in all likelihood, the PCM itself is bad.

The Ignition Module, also transmits to the PCM.

It appears after all your testing - that the PCM is at fault.

It does not error report on itself (unfortunately).

The ignition timing is controlled by the Powertrain Control Module (PCM). No adjustment is necessary (distributorless ignition) or possible.

Please see the following....

The ignition timing is controlled by the Powertrain Control Module (PCM). No adjustment is necessary or possible.
The engines covered by this manual are equipped with distributorless ignitions, ignition timing is controlled by the Powertrain Control Module (PCM), as applicable. No adjustments are possible. If ignition timing is not within specification, there is a fault in the engine control system. Diagnose and repair the problem as necessary.
Ignition timing is the measurement, in degrees of crankshaft rotation, of the point at which the spark plugs fire in each of the cylinders. It is measured in degrees before or after Top Dead Center (TDC) of the compression stroke.
Ideally, the air/fuel mixture in the cylinder will be ignited by the spark plug just as the piston passes TDC of the compression stroke. If this happens, the piston will be at the beginning of the power stroke just as the compressed and ignited air/fuel mixture forces the piston down and turns the crankshaft. Because it takes a fraction of a second for the spark plug to ignite the mixture in the cylinder, the spark plug must fire a little before the piston reaches TDC. Otherwise, the mixture will not be completely ignited as the piston passes TDC and the full power of the explosion will not be used by the engine.
The timing measurement is given in degrees of crankshaft rotation before the piston reaches TDC (BTDC). If the setting for the ignition timing is 10 BTDC, each spark plug must fire 10 degrees before each piston reaches TDC. This only holds true, however, when the engine is at idle speed. The combustion process must be complete by 23° ATDC to maintain proper engine performance, fuel mileage, and low emissions.
As the engine speed increases, the pistons go faster. The spark plugs have to ignite the fuel even sooner if it is to be completely ignited when the piston reaches TDC. Spark timing changes are accomplished electronically by the engine and ignition control computers.
If the ignition is set too far advanced (BTDC), the ignition and expansion of the fuel in the cylinder will occur too soon and tend to force the piston down while it is still traveling up. This causes pre ignition or -knocking and pinging-. If the ignition spark is set too far retarded, or after TDC (ATDC), the piston will have already started on its way down when the fuel is ignited. The piston will be forced down for only a portion of its travel, resulting in poor engine performance and lack of power.
Timing marks or scales can be found on the rim of the crankshaft pulley and the timing cover. The marks on the pulley correspond to the position of the piston in the No. 1 cylinder. A stroboscopic (dynamic) timing light is hooked onto the No. 1 cylinder spark plug wire (2.2L engine only, on the 2.4L engines, special adapters are needed) . Every time the spark plug fires, the timing light flashes. By aiming the light at the timing marks while the engine is running, the exact position of the piston within the cylinder can be easily read (the flash of light makes the mark on the pulley appear to be standing still). Proper timing is indicated when the mark and scale are in specified alignment.


WARNING When checking timing with the engine running, take care not to get the timing light wires tangled in the fan blades and/or drive belts.

The engines covered by this manual are equipped with distributorless ignitions, ignition timing is controlled by the Powertrain Control Module (PCM), as applicable. No adjustments are possible. If ignition timing is not within specification, there is a fault in the engine control system. Diagnose and repair the problem as necessary.




Thanks for using FixYa!!

Posted on Aug 18, 2009

  • 7 Answers

SOURCE: 1993 Chevy S10 Blazer engine hesitation with smoke from exhaust

Had a 94 Olds Bravada that did a similar thing and it was EGR valve on the front of the intake. It' s easy to take off and clean with WD 40 and if you have an air compressor blow it out good.

Posted on Jan 24, 2010

  • 40 Answers

SOURCE: 1998 chevy c15 5.7 SFI SYSTEM

What is the outside temperature there? I have had very hard time starting my 98 chevy when temps are in the single or negative digits, especially after sitting. The battery just does not have enough cranking amps at those temps. The truck sounds like it cranks fine but when you watch the volt gauge on the dash it dips close to the red area while cranking. I have replaced my battery and my truck starts fine now. i still think I need to replace my battery cables. I would suggest cleaning cables and boosting the battery while trying to start. I know this sounds too simple but it is easy to try. The computer will not function with low voltage.

Posted on Feb 03, 2010

Testimonial: "Thanks for input, temps have been in the 30s&40s at this time and the battery was replaced about 4 weeks ago and the cables are good to go"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn key to start and nothing happens. All lights are on, battery good. Doesn't turn over---nothing. Switch or starter or some kind of relay??? HELP!!!


For 1999 Buick LeSabre - but you took #1 off the list, so here's the whole "failure to start" list:

Priority Action Part Type Cause
1 Inspect Battery Battery Discharged or Faulty.
2 Inspect Battery Cable Corroded, Broken, Shorted or Poorly Connected Battery Cable.
3 Inspect Distributor Cap Distributor Cap Cracked or Burned.
3 Inspect Fuel Filter Clogged or Dirty Fuel Filter.
5 Inspect Ignition Coil Faulty Ignition Coil.
6 Inspect Wireset Worn, Damaged or Faulty Spark Plug Wire(s).
7 Inspect Spark Plug Incorrectly Gapped or Fouled Spark Plug(s).
8 Inspect Starter Starter Motor Faulty.
9 Inspect Fuel Pump Low Fuel Pressure.
10 Inspect Starter Relay Faulty Starter Starter Relay
11 Inspect Fuel Pump Relay Faulty Fuel Pump Relay.
12 Inspect Fuel Injector Pressure Regulator Faulty Fuel Injector Pressure Regulator.
13 Inspect Ignition Switch Improperly Connected or Faulty Ignition Switch.
14 Inspect Starter Motor Faulty Starter Motor
15 Inspect Fuel Injector Dirty or Worn Fuel Injectors.
16 Inspect Fuel Pump Strainer Clogged or Dirty Fuel Pump Strainer
17 Inspect Engine Control Computer Incorrect Operating Information Being Delivered and Sent From The EEC.
18 Inspect Fuel Tank Fuel Tank Empty.
19 Inspect Carburetor Carburetor Flooded or Faulty Choke.
20 Inspect Distributor Rotor Distributor Rotor broken, burned contacts, or loose
21 Inspect Distributor Worn, Loose, or Incorrectly Installed Distributor.

Sep 12, 2011 | 1999 Buick LeSabre

1 Answer

My mitsubishi eclipse 95 gs wont start and theres no light on my dash bored it will cranck but wont start at all i need help asap


Since the engine cranks, the battery, starter motor/starter motor solenoid are most likely
good, so suspect everything else on the list. When you narrow it down, re-post with a
more specific question about that particular component, since 100s of components must operate
nearly perfectly for a vehicle to actually start.

Priority Action Part Type -- Cause
1 Inspect Battery -- Battery Discharged or Faulty.
2 Inspect Battery Cable -- Corroded, Broken, Shorted or Poorly Connected Battery Cable.
3 Inspect Battery Cable Connector -- Broken/Corroded/Loose.
4 Inspect Fuel Filter -- Clogged or Dirty Fuel Filter.
5 Inspect Ignition Coil -- Faulty Ignition Coil.
6 Inspect Wireset (aka Spark Plug Wires) -- Worn, Damaged or Faulty Spark Plug Wire(s).
7 Inspect Spark Plug -- Incorrectly Gapped or Fouled Spark Plug(s).
8 Inspect Starter -- Starter Motor Faulty.
9 Inspect Fuel Pump -- Low Fuel Pressure.
10 Inspect Solenoid Switch -- Faulty Starter Solenoid Switch.
11 Inspect Fuel Pump Relay -- Faulty Fuel Pump Relay.
12 Inspect Fuel Injector Pressure Regulator -- Faulty Fuel Injector Pressure Regulator.
13 Inspect Ignition Switch -- Improperly Connected or Faulty Ignition Switch.
14 Inspect Starter Drive -- Faulty Starter Drive.
15 Inspect Fuel Injectors -- Dirty or Worn Fuel Injectors.
16 Inspect Fuel Pump Strainer (inside fuel tank) -- Clogged or Dirty Fuel Pump Strainer.
17 Inspect Engine Control Computer -- Incorrect Operating Information Being Delivered and Sent From The EEC (faulty computer)
18 Inspect Fuel Tank -- Fuel Tank Empty.
19 Inspect Carburetor -- Carburetor Flooded or Faulty Choke.
20 Inspect Distributor Cap -- Worn, Loose, Cracked, or Incorrectly Installed Distributor Cap.
21 Inspect Distributor Rotor -- Worn, Loose, Burnt contact surface
22 Test/Inspect Neutral Safety Switch -- Faulty Neutral Safety Switch

Aug 16, 2011 | 1995 Mitsubishi Eclipse

2 Answers

Problem with the ignition it will not turn on it does turn but will not turn on


The pin on the back side of the key may be sheared or the "push" lever may not be moving. Lower your steering column to check.

Apr 17, 2011 | 2001 Ford Focus

2 Answers

I was accelerating the other day and all of a sudden my car starts bucking and losing acceleration. After about a minute it dies completlely. I wait a few minutes and try to start it and it starts barely...


A few Ideas from the 1995 Nissan Sentra maintenance manual - Troubleshooting section

Priority Action Part Type Cause
1 Inspect Battery Battery Discharged or Faulty.
2 Inspect Battery Cable Corroded, Broken, Shorted or Poorly Connected Battery Cable.
3 Inspect Fuel Filter Clogged or Dirty Fuel Filter.
3 Inspect Distributor Cap Distributor Cap Cracked or Burned.
5 Inspect Coil - Ignition Faulty Ignition Coil.
6 Inspect Wireset Worn, Damaged or Faulty Spark Plug Wire(s).
7 Inspect Spark Plug Incorrectly Gapped or Fouled Spark Plug(s).
8 Inspect Starter Starter Motor Faulty.
9 Inspect Fuel Pump Low Fuel Pressure.
10 Inspect Solenoid Switch Faulty Starter Solenoid Switch.
11 Inspect Relay - Fuel Pumpat Faulty Fuel Pump Relay.
12 Inspect Fuel Injector Pressure Regulator Faulty Fuel Injector Pressure Regulator.
13 Inspect Ignition Switch Improperly Connected or Faulty Ignition Switch.
14 Inspect Starter Drive Faulty Starter Drive.
15 Inspect Fuel Injector Dirty or Worn Fuel Injectors.
16 Inspect Fuel Pump Strainer Clogged or Dirty Fuel Pump Strainerat.
17 Inspect Engine Control Computer Incorrect Operating Information Being Delivered and Sent From The EEC.
18 Inspect Fuel Tank Fuel Tank Empty.
19 Inspect Carburetor Carburetor Flooded or Faulty Choke.
20 Inspect Distributor Worn, Loose, or Incorrectly Installed Distributor.

Mar 26, 2011 | 1995 Nissan Sentra

1 Answer

My car wont start


1 Inspect Battery -- Battery Discharged or Faulty.
2 Inspect Battery Cable -- Corroded, Broken, Shorted or Poorly Connected Battery Cable.
3 Inspect Distributor Cap -- Distributor Cap Cracked or Burned.
3 Inspect Fuel Filter -- Clogged or Dirty Fuel Filter.
5 Inspect Coil - Ignition -- Faulty Ignition Coil.
6 Inspect Wireset -- Worn, Damaged or Faulty Spark Plug Wire(s).
7 Inspect Spark Plug -- Incorrectly Gapped or Fouled Spark Plug(s).
8 Inspect Starter -- Starter Motor Faulty.
9 Inspect Fuel Pump -- Low Fuel Pressure.
10 Inspect Solenoid Switch -- Faulty Starter Solenoid Switch.
11 Inspect Relay - Fuel Pump ----- Faulty Fuel Pump Relay.
12 Inspect Fuel Injector Pressure Regulator --- Faulty Fuel Injector Pressure Regulator.
13 Inspect Ignition Switch --- Improperly Connected or Faulty Ignition Switch.
14 Inspect Starter Drive --- Faulty Starter Drive.
15 Inspect Fuel Injector --- Dirty or Worn Fuel Injectors.
16 Inspect Fuel Pump Strainer ---- Clogged or Dirty Fuel Pump Strainerat.

Mar 17, 2011 | 1995 Buick LeSabre

2 Answers

The car suddenl wont turn over. It has a brand new starter & the battery is fine but it wont turn over.


This will be due to a bad fuel pump, a broken timing belt, an inoperative cam sensor or crank sensor. Also this problems are related to faulty spark plug. Check the spark at spark plugs when you start the car. Do you notice any spark. Actually you should see. If in case there is no spark then it's a spark plug problem. Also the coil pack gives power to spark plug. So check the voltage at coil pack. It will show 12 volt.If there is no voltage noticed at coil pack then its faulty coil pack that has to be replaced.Also check and confirm that there is fuel in the car. If its very low fuel then in some cases this causes the problem. Also check and confirm that fuel pump is functioning properly and the fuel filter is not clogged. One of the easiest ways to check for a fuel pump related problem is to spray a little starting fluid into the air intake while trying to start the car. If the car starts momentarily, then there's a good chance the fuel pump is not working or the car is out of gas. You can also listen for the fuel pump's humming sound when the key is first turned on. Also if a inoperative fuel pump is suspected, a good technician will always check to verify there is power and ground being supplied to the pump, to eliminate the possibility of a bad relay or electrical issue. Fuel pressure can be checked with a pressure gauge and if there is pressure, pulse can be checked at the fuel injectors in several ways including the most common, with the use of noid lights. If the injectors don't have pulse the engine won't start. ---------- This troubleshooting tips will help you to solve the problem.Thanks.Helpmech.

Nov 15, 2010 | 2001 Chevrolet Blazer

1 Answer

New fuel pump and still wont start


1 Inspect Battery Battery Discharged or Faulty. 2 Inspect Battery Cable Corroded, Broken, Shorted or Poorly Connected Battery Cable. 3 Inspect Distributor Cap Distributor Cap Cracked or Burned. 3 Inspect Fuel Filter Clogged or Dirty Fuel Filter. 5 Inspect Coil - Ignition Faulty Ignition Coil. 6 Inspect Wireset Worn, Damaged or Faulty Spark Plug Wire(s). 7 Inspect Spark Plug Incorrectly Gapped or Fouled Spark Plug(s). 8 Inspect Starter Starter Motor Faulty. 9 Inspect Fuel Pump Low Fuel Pressure. 10 Inspect Solenoid Switch Faulty Starter Solenoid Switch. 11 Inspect Relay - Fuel Pumpat Faulty Fuel Pump Relay. 12 Inspect Fuel Injector Pressure Regulator Faulty Fuel Injector Pressure Regulator. 13 Inspect Ignition Switch Improperly Connected or Faulty Ignition Switch. 14 Inspect Starter Drive Faulty Starter Drive. 15 Inspect Fuel Injector Dirty or Worn Fuel Injectors. 16 Inspect Fuel Pump Strainer Clogged or Dirty Fuel Pump Strainerat. 17 Inspect Engine Control Computer Incorrect Operating Information Being Delivered and Sent From The EEC. 18 Inspect Fuel Tank Fuel Tank Empty. 19 Inspect Carburetor Carburetor Flooded or Faulty Choke. 20 Inspect Distributor Worn, Loose, or Incorrectly Installed Distributor.

May 22, 2010 | 2000 Dodge Caravan

2 Answers

Wont start turns over but no start


1 Inspect Battery Battery Discharged or Faulty. 2 Inspect Battery Cable Corroded, Broken, Shorted or Poorly Connected Battery Cable. 3 Inspect Fuel Filter Clogged or Dirty Fuel Filter. 3 Inspect Distributor Cap Distributor Cap Cracked or Burned. 5 Inspect Coil - Ignition Faulty Ignition Coil. 6 Inspect Wireset Worn, Damaged or Faulty Spark Plug Wire(s). 7 Inspect Spark Plug Incorrectly Gapped or Fouled Spark Plug(s). 8 Inspect Starter Starter Motor Faulty. 9 Inspect Fuel Pump Low Fuel Pressure. 10 Inspect Solenoid Switch Faulty Starter Solenoid Switch. 11 Inspect Relay - Fuel Pumpat Faulty Fuel Pump Relay. 12 Inspect Fuel Injector Pressure Regulator Faulty Fuel Injector Pressure Regulator. 13 Inspect Ignition Switch Improperly Connected or Faulty Ignition Switch. 14 Inspect Starter Drive Faulty Starter Drive. 15 Inspect Fuel Injector Dirty or Worn Fuel Injectors. 16 Inspect Fuel Pump Strainer Clogged or Dirty Fuel Pump Strainerat. 17 Inspect Engine Control Computer Incorrect Operating Information Being Delivered and Sent From The EEC. 18 Inspect Fuel Tank Fuel Tank Empty. 19 Inspect Carburetor Carburetor Flooded or Faulty Choke. 20 Inspect Distributor Worn, Loose, or Incorrectly Installed Distributor.

Jul 02, 2009 | 1997 Ford F250 SuperCab

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...