Question about 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

My tail lights on the driver side only do not work I have a 2007 Dodge Ram 1500.The lights on the passenger side work fine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 17,129 Answers

The wiring of the harness is parallel to the sides. hence you will need to trace the driverr side lamp connection backwards to the joining section of the line. Please check on the ground connection of the lamp assembly, remove and clean and reset after confirming that the groundis fine but the voltage does not reach on switch on of the park lamps. If this becomes difficult to trace just take a parallel wires from the passenger side lamp to be connected to the non working side. this will work fine. Please take care to insulate.Good day

Posted on Jul 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 dodge ram 4.7 heat/air trouble


if you have a tilt wheel,you may have a broken wire,replace the whole colunmb also,,,,,,,,,,,,,(pics)look for 2 and 7 ,,blend door actuators,,
25683800-dbg1d4nweydockjpekf2wtox-1-0.png

25683800-dbg1d4nweydockjpekf2wtox-1-2.gif

25683800-dbg1d4nweydockjpekf2wtox-1-5.gif

25683800-dbg1d4nweydockjpekf2wtox-1-9.gif

May 07, 2015 | 2003 Dodge Ram Pickup 1500

1 Answer

Where in a 2007 Dodge 1500 Quad cab is the BCM located


Not 100% sure at the moment, but will get back to you. Check behind kick panel by passenger right foot position in meantime.

Feb 14, 2013 | 2007 Dodge Ram Truck

1 Answer

I have a 2007 Dodge Ram 1500 sport 5 7 hemi when i press my brakes my front passenger side running light comes on when the lights are on the rear passenger side blinker does not work


Bad light bulbs are a good place to look...have you replaced any lately. Look for a bulb where the filiment may be broke and laying against the filiment below it. I would suspect the stop light bulbs first.

Nov 01, 2011 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

Brake,hazard and turnsignals not working, headlights and tail lights work fine


I suggest first check FLASHER unit. On 2001 Dodge Truck RAM 1500 1/2 ton 4WD 5.2L SFI 8cyl the Flasher is located on seating area, driver side, at the left side ofinstrument panel on fuse block.

Hope this helps (remember to rating this free answer and leave a testimonial comment).

Oct 09, 2011 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Looking for a tail light wiring diagram for 2004 Dodge Ram 1500. Needing to find which wire is used for reverse light


low beam kigth out on driver side replaced balb an still dont work this is om my 2004 dodge ram 1500

Dec 08, 2010 | 2004 Dodge Ram

1 Answer

2007 dodge ram 4.4 beeps when i press the brake pedal but the tail light is out on the left side also. And when you turn on the left blinker it goes crazy fast and no light in the light assembly. Help?


If you have a beebing noise every time you press on the brake, it is because a tail light is burnt out. There are two filaments in each brake light. Therefore, when you turn on your hazards, it will appear that both tail lights work properly. The beebing warning sound is actually a feature that Dodge put in the Rams so drivers would know their tale light is out. Just replace the tail light bulb, and the beebing will automatically cease. To get the tail light housing out, you will need a torex screw driver. Also, you twist the bulb housing out as opposed to pulling it out. There are three prongs that twist out.

Jan 21, 2010 | 2007 Dodge Ram Truck

1 Answer

Tail light out on drivers side of 2001 Dodge pickup truck 1500


open the tailgate and there are 2 screws that hold the whole assembly in...remove the assembly and they are accessed from the back

Mar 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Tail light works but no brake light on2003 Dodge Ram 1500


if it has a trailer package look at the splitter when you take off the tail light cover might be that plug.

Dec 20, 2008 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
2007 Dodge Ram 1500 Quad Cab Sport Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...