Question about Cars & Trucks

1 Answer

On r 92 corolla the tail lights on the rear r out. I've checked the fuse & bulbs. I tried to put them on a toggle switch but when I tied into harness the turn signals started to act up!

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 200 Answers

If similar to camry there is a yellow box under the driver side panel in the trunk that controlls the lights it is very expensive a friend of mine cut his out and wired it straight it worked but I would recommend a salvage yard if you can find one that has not been crushed yet....Good Luck

Posted on Jul 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a fuse that pops ever time I pull the light switch? 96 dodge Dakota no tail lights no side markers no license plate lightship. Has head lights turn signals brake lights reverse.


Sounds like you have a short that is going to ground. You can put a fuse in and have someone watch the rear lamps when you pull the light switch on. You can also check the bulb sockets by removing the bulbs. You could try a 5 amp heavier fuse (be careful only for a few seconds). Check the wiring for a weak spot as well. Try another light switch. I hope this helps.

Jul 11, 2015 | 1996 Dodge Dakota

2 Answers

Hey,I have an 03 chevy s10,I recently tried putting a pig tail on it (straight wired) and had no luck,gave up and crimped all the wire back together,and today a guy at work noticed I had no taillights,but...


I would check your tail light fuse first then test the brown wire in the tail light harness where you origionally cut into it. With the lights on there should be around 12v on it. if not you may have pulled the wire too hard and broke it upstream. Test to see if there is 12v at the fuse ad if there is, your trouble should be in the wire between the fuse and the spot where you cut into it.

Mar 25, 2013 | Cars & Trucks

1 Answer

Tail lights wont come on in 2001 toyota corolla


Check brake light switch, probably under dash,
on or next to brake pedal lever.
If bulbs and switch[es] check out, have helper press pedal,
and check for voltage/power at sockets.

Jul 27, 2012 | 2001 Toyota Corolla

1 Answer

I have a Kia Sportage 2001 that the back tail lights and dash broad lights have gone out on. I've replaced the tail lights fuse twice with a 10 amp fuse but they have blown out twice more. What...


COULD HAVE SHORT IN THE INHIBITOR SWITCH OR BACK UP LIGHT SWITCH.CHECK TAIL BULB SOCKETS.LOOK FOR BURN SIGNS AT BULB SOCKET SHORTING OUT.

Aug 13, 2011 | 2001 Kia Sportage

1 Answer

I have a 94 ford probe, The radio works when it wants to.. but the prblem is the tail lights and dash lights went out about a week ago, Checked all fuses in car and under hood checked all light bulbs all...


You need to replace headlight switch - if fuses, bulbs, wiring looks good. Avoid the toggle switch idea, you'll be opening a whole new can of worms.

Mar 01, 2011 | 1994 Ford Probe

1 Answer

2003 ford expedition tail turn signal light dont work bulbs are ok


You say the rear tail turn signals are not working are the fronts working? If the fronts work and the rears don't then you have a wire issue. Check the grounds for the tail lights or check and see if a trailer wire harness was put in by splicing the wires. Also check for brake lights and see if they work should be same bulb. If the fronts do not work either check fuse 18 in the fuse box should be a 10 amp or check brake fuse 2 which is a 20 amp

Jul 06, 2009 | 2006 Ford Expedition

1 Answer

1993 toyota corolla head & tail lights


did you check the bulb,relay or fuse for low beam

Jun 04, 2009 | 1996 Toyota Corolla

2 Answers

No brake lights, fuses keep blowing and wont shift out of park


I would look for a wiring short in the trunk at the taillamp area, or, inspect the sockets for the taillamp bulbs for corrosion. In any case, you have a short circuit in the trunk area, also check the wire that comes from the body & goes up the trunk hinge on the driver side; that wire may be chafed, and it may be shorting out. Hope this helps; please get back to me if you need any further assistance.

Nov 04, 2008 | 1996 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...